Cut Style Cut Style |
---|
![]() | ![]() |
Chamfer | Double Chamfer |
For Use On For Use On |
---|
|
|
Mill Diameter Mill Diameter |
---|

|
|
|
Material Material |
---|
|
Length of Cut Length of Cut |
---|
Overall Length Overall Length |
---|
|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
Component Component |
---|
|
For Use With For Use With |
---|
|
Carbide Chamfer End Mills
![]() Chamfer Cut Style | ![]() 2 Flute |
![]() 4 Flute |
Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish on hard material. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. They have an angled profile for making chamfer, bevel, and other angled cuts.
End mills with two flutes provide better chip clearance for high-volume, high-speed roughing cuts. End mills with four flutes provide a finer finish and operate with less vibration when run at high speeds.
Use uncoated end mills for general purpose milling and short production runs. Use titanium-aluminum-nitride (TiAIN) coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills. They also dissipate heat better than other end mills, especially at high speeds. At high temperatures, this coating creates a layer of aluminum oxide that transfers heat to the chips, keeping the tool cool, even when used without lubrication.
For technical drawings and 3-D models, click on a part number.
Mill Dia. | Shank Dia. | Lg. of Cut | Overall Lg. | Flute Spacing | For Use On | Each | |
Uncoated | |||||||
---|---|---|---|---|---|---|---|
2 Flute—60° Cutting Angle | |||||||
1/8" | 1/8" | 0.1" | 1 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 000000 |
3/16" | 3/16" | 0.154" | 2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
1/4" | 1/4" | 7/32" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
3/8" | 3/8" | 21/64" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
1/2" | 1/2" | 7/16" | 3" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
3mm | 3mm | 2.59mm | 38mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
4mm | 4mm | 3.46mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
6mm | 6mm | 5.19mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
8mm | 8mm | 6.92mm | 63mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
10mm | 10mm | 8.66mm | 70mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
12mm | 12mm | 10.39mm | 74mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
2 Flute—82° Cutting Angle | |||||||
1/8" | 1/8" | 0.066" | 1 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
3/16" | 3/16" | 0.102" | 2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
1/4" | 1/4" | 9/64" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
3/8" | 3/8" | 7/32" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
1/2" | 1/2" | 9/32" | 3" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
3mm | 3mm | 1.72mm | 38mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
4mm | 4mm | 2.3mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
6mm | 6mm | 3.45mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
8mm | 8mm | 4.6mm | 63mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
10mm | 10mm | 5.75mm | 70mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
12mm | 12mm | 6.9mm | 74mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
2 Flute—90° Cutting Angle | |||||||
1/8" | 1/8" | 0.058" | 1 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
3/16" | 3/16" | 0.089" | 2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
1/4" | 1/4" | 1/8" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
3/8" | 3/8" | 3/16" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
1/2" | 1/2" | 1/4" | 3" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
3mm | 3mm | 1.5mm | 38mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
4mm | 4mm | 2mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
6mm | 6mm | 3mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
8mm | 8mm | 4mm | 63mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
10mm | 10mm | 5mm | 70mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
12mm | 12mm | 6mm | 74mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
4 Flute—60° Cutting Angle | |||||||
1/8" | 1/8" | 0.1" | 1 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
3/16" | 3/16" | 0.154" | 2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
1/4" | 1/4" | 7/32" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
3/8" | 3/8" | 21/64" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
1/2" | 1/2" | 7/16" | 3" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
3mm | 3mm | 2.59mm | 38mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
4mm | 4mm | 3.46mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
6mm | 6mm | 5.19mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
8mm | 8mm | 6.92mm | 63mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
10mm | 10mm | 8.66mm | 70mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
12mm | 12mm | 10.39mm | 74mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
4 Flute—82° Cutting Angle | |||||||
1/8" | 1/8" | 0.066" | 1 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
3/16" | 3/16" | 0.102" | 2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
1/4" | 1/4" | 9/64" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
3/8" | 3/8" | 7/32" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
1/2" | 1/2" | 9/32" | 3" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
3mm | 3mm | 1.72mm | 38mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
4mm | 4mm | 2.3mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
6mm | 6mm | 3.45mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
8mm | 8mm | 4.6mm | 63mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
10mm | 10mm | 5.75mm | 70mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
12mm | 12mm | 6.9mm | 74mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
4 Flute—90° Cutting Angle | |||||||
1/8" | 1/8" | 0.058" | 1 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
3/16" | 3/16" | 0.089" | 2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
1/4" | 1/4" | 1/8" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
3/8" | 3/8" | 3/16" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
1/2" | 1/2" | 1/4" | 3" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
3mm | 3mm | 1.5mm | 38mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
4mm | 4mm | 2mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
6mm | 6mm | 3mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
8mm | 8mm | 4mm | 63mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
10mm | 10mm | 5mm | 70mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
12mm | 12mm | 6mm | 74mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
Titanium Aluminum Nitride (TiAlN) Coated | |||||||
2 Flute—60° Cutting Angle | |||||||
1/8" | 1/8" | 0.108" | 1 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
3/16" | 3/16" | 0.162" | 2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
1/4" | 1/4" | 0.216" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
3/8" | 3/8" | 0.324" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
1/2" | 1/2" | 0.433" | 3" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
3mm | 3mm | 2.59mm | 38mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
4mm | 4mm | 3.46mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
6mm | 6mm | 5.19mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
8mm | 8mm | 6.92mm | 63mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
10mm | 10mm | 8.66mm | 70mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
12mm | 12mm | 10.39mm | 74mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
2 Flute—82° Cutting Angle | |||||||
1/8" | 1/8" | 0.071" | 1 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
3/16" | 3/16" | 0.107" | 2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
1/4" | 1/4" | 0.143" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
3/8" | 3/8" | 0.215" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
1/2" | 1/2" | 0.287" | 3" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
3mm | 3mm | 1.72mm | 38mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
4mm | 4mm | 2.3mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
6mm | 6mm | 3.45mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
8mm | 8mm | 4.6mm | 63mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
10mm | 10mm | 5.75mm | 70mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
12mm | 12mm | 6.9mm | 74mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
2 Flute—90° Cutting Angle | |||||||
3mm | 3mm | 1.5mm | 38mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
4mm | 4mm | 2mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
6mm | 6mm | 3mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
8mm | 8mm | 4mm | 63mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
10mm | 10mm | 5mm | 70mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
12mm | 12mm | 6mm | 74mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
4 Flute—60° Cutting Angle | |||||||
1/8" | 1/8" | 0.108" | 1 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
3/16" | 3/16" | 0.162" | 2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
1/4" | 1/4" | 0.216" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
3/8" | 3/8" | 0.324" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
1/2" | 1/2" | 0.433" | 3" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
3mm | 3mm | 2.59mm | 38mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
4mm | 4mm | 3.46mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
6mm | 6mm | 5.19mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
8mm | 8mm | 6.92mm | 63mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
10mm | 10mm | 8.66mm | 70mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
12mm | 12mm | 10.39mm | 74mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
4 Flute—82° Cutting Angle | |||||||
1/8" | 1/8" | 0.071" | 1 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
3/16" | 3/16" | 0.107" | 2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
1/4" | 1/4" | 0.143" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
3/8" | 3/8" | 0.215" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
1/2" | 1/2" | 0.287" | 3" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
3mm | 3mm | 1.72mm | 38mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
4mm | 4mm | 2.3mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
6mm | 6mm | 3.45mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
8mm | 8mm | 4.6mm | 63mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
10mm | 10mm | 5.75mm | 70mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
12mm | 12mm | 6.9mm | 74mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
4 Flute—90° Cutting Angle | |||||||
1/8" | 1/8" | 1/16" | 1 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
3/16" | 3/16" | 0.093" | 2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
1/4" | 1/4" | 1/8" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
3/8" | 3/8" | 3/16" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
1/2" | 1/2" | 1/4" | 3" | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
3mm | 3mm | 1.5mm | 38mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
4mm | 4mm | 2mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
6mm | 6mm | 3mm | 50mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
8mm | 8mm | 4mm | 63mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
10mm | 10mm | 5mm | 70mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
12mm | 12mm | 6mm | 74mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 00000000 | 00000 |
High-Speed Steel Chamfer End Mills


Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. Their angled profile allows chamfer, bevel, and other angled cuts. A titanium-nitride (TiN) coating reduces friction and provides increased wear resistance.
For technical drawings and 3-D models, click on a part number.
Mill | ||||||
---|---|---|---|---|---|---|
Dia. | Thick. | Shank Dia. | Overall Lg. | For Use On | Each | |
Titanium Nitride (TiN) Coated | ||||||
45° Cutting Angle | ||||||
1/2" | 3/16" | 3/8" | 2 1/8" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Tool Steel | 00000000 | 000000 |
3/4" | 1/4" | 3/8" | 2 1/8" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Tool Steel | 00000000 | 00000 |
1" | 3/8" | 1/2" | 2 1/2" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Tool Steel | 00000000 | 000000 |
1 1/2" | 9/16" | 3/4" | 2 3/4" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Tool Steel | 00000000 | 000000 |
60° Cutting Angle | ||||||
1/2" | 9/32" | 3/8" | 2 1/8" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Tool Steel | 00000000 | 00000 |
3/4" | 3/8" | 3/8" | 2 1/8" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Tool Steel | 00000000 | 00000 |
1" | 1/2" | 1/2" | 2 1/2" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Tool Steel | 00000000 | 000000 |
1 1/2" | 11/16" | 3/4" | 2 3/4" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Tool Steel | 00000000 | 000000 |
High-Speed Steel Double-Chamfer End Mills


Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. The teeth are angled in two directions so you can make top and bottom chamfers without having to flip the workpiece.
For technical drawings and 3-D models, click on a part number.
Mill | ||||||
---|---|---|---|---|---|---|
Dia. | Thick. | Shank Dia. | Overall Lg. | For Use On | Each | |
Uncoated | ||||||
60° Cutting Angle | ||||||
3/4" | 3/16" | 3/8" | 2 3/8" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 000000 |
1" | 5/16" | 1/2" | 2 17/32" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
1 3/8" | 7/16" | 5/8" | 3 7/32" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 000000 |
2 1/4" | 1/2" | 3/4" | 3 1/8" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 000000 |
90° Cutting Angle | ||||||
3/4" | 1/4" | 3/8" | 2 7/16" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
1" | 3/8" | 1/2" | 2 29/32" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
1 3/8" | 1/2" | 5/8" | 3 9/32" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 000000 |
2 1/4" | 1/2" | 3/4" | 3 1/8" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 000000 |
Carbide Double-Chamfer End Mills


Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish on hard material. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. The teeth are angled in two directions so you can make top and bottom chamfers without having to flip the workpiece.
For technical drawings and 3-D models, click on a part number.
Mill Dia. | Shank Dia. | Neck Lg. | Lg. of Cut | Overall Lg. | Flute Spacing | For Use On | Each | |
Uncoated | ||||||||
---|---|---|---|---|---|---|---|---|
4 Flute—90° Cutting Angle | ||||||||
0.12" | 1/8" | 1/4" | 0.072" | 2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 000000 |
0.12" | 1/8" | 1/2" | 0.072" | 2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
6 Flute—90° Cutting Angle | ||||||||
0.18" | 3/16" | 1/4" | 0.093" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
0.18" | 3/16" | 1/2" | 0.093" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
0.18" | 3/16" | 3/4" | 0.093" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
0.18" | 3/16" | 1" | 0.093" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
0.24" | 1/4" | 1/4" | 0.093" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
0.24" | 1/4" | 1/2" | 0.093" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
0.24" | 1/4" | 3/4" | 0.093" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
0.24" | 1/4" | 1" | 0.093" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
0.31" | 5/16" | 1/2" | 0.093" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
0.31" | 5/16" | 3/4" | 0.093" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
0.31" | 5/16" | 1" | 0.093" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
0.36" | 3/8" | 1/4" | 1/8" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
0.36" | 3/8" | 1/2" | 1/8" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
0.36" | 3/8" | 3/4" | 1/8" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
0.49" | 1/2" | 1/2" | 0.156" | 3" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
0.49" | 1/2" | 1" | 0.156" | 3" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
Carbide-Tipped Double-Chamfer End Mills


These carbide-tipped end mills provide a sharper, harder cutting edge and better wear resistance at high temperatures than high-speed steel. Because they aren’t as brittle as solid carbide, they can be used in less rigid setups, such as manual milling machines. Their teeth are angled on both sides so you can make top and bottom chamfer cuts without having to flip the workpiece.
For technical drawings and 3-D models, click on a part number.
Mill | |||||||
---|---|---|---|---|---|---|---|
Dia. | Thick. | Shank Dia. | Lg. of Cut | Overall Lg. | For Use On | Each | |
Uncoated Carbide-Tipped High-Speed Steel | |||||||
60° Cutting Angle | |||||||
3/4" | 3/16" | 3/8" | 3/16" | 2 3/8" | Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 0000000 |
1" | 5/16" | 1/2" | 5/16" | 2 27/32" | Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 000000 |
90° Cutting Angle | |||||||
3/4" | 1/4" | 3/8" | 1/4" | 2 7/16" | Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 000000 |
1" | 3/8" | 1/2" | 3/8" | 2 29/32" | Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 000000 |
Plate Bevelers

Create beveled edges, contours, and cutouts on flat plates in order to prepare them for welding and give them a finished look. For a complete setup, you’ll need a beveler and a cutter head with the right angle for your application.
Bevelers have an electric motor to remove material quickly. Maneuver them using the rotating handle. To set the length of the bevel and make sure it’ll be even, they have an adjustable guide you hold against the plate as you cut. When it’s time to change cutter heads, these bevelers have a spindle lock that stops the spindle from rotating, which makes the switch quicker and safer.
Cutter heads produce an accurate, consistent bevel angle and a smooth finish. Swap between heads for different angles and replace them when they get worn out or damaged.

Power Source | Maximum Speed, rpm | Current, A | Voltage | Mount Type | Speed Control Type | Overall Length | Weight, lbs. | Features | Each | |
Electric | 6,600 | 15 | 120V AC | Hand Held | Fixed | 22 1/2" | 21 | Adjustable Guide, Rotating Handle, Spindle Lock | 0000000 | 000000000 |


Cutter Heads | Replacement Inserts | ||||||||
---|---|---|---|---|---|---|---|---|---|
For Use On | Cutting Pattern | Bevel Angle | Insert Material | Number of Inserts Included | Each | Pkg. Qty. | Pkg. | ||
2 Cutting Edges per Insert | |||||||||
Aluminum, Brass, Bronze, Copper, Iron, Plastic, Stainless Steel, Steel, Tool Steel | Straight Bevel | 30° | Titanium Nitride (TiN)-Coated Carbide | 3 | 0000000 | 0000000 | 10 | 0000000 | 0000000 |
Aluminum, Brass, Bronze, Copper, Iron, Plastic, Stainless Steel, Steel, Tool Steel | Straight Bevel | 45° | Titanium Nitride (TiN)-Coated Carbide | 3 | 0000000 | 000000 | 10 | 0000000 | 000000 |
Battery-Powered Plastic Pipe and Tube Bevelers
Lightweight and portable, these battery-powered bevelers cut faster than manual ones. Use them to quickly and safely create smooth beveled edges on plastic pipe and tubing so that cement distributes evenly for a leak-tight connection. An adjustable guide plate helps you cut an accurate, even edge all the way around the pipe. The OD guard protects you from the router bit and flying plastic shavings.

Battery | Overall | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
For Pipe Size Range | Cutting Pattern | Included | Charger Included | Diameter | Length | Manufacturer Model Number | Includes | Features | Each | |
2 and up | Straight Bevel | Yes | Yes | 6" | 18 3/4" | DCG426B | Beveler Adapter, Carrying Case, Cordless Die Grinder, OD Guard, One 15° Carbide Router Bit with Four Flutes, Two L-Keys, Two Wrenches | Adjustable Guide | 0000000 | 0000000 |

Style | Voltage | Capacity, amp-hrs. | Each | |
Lithium Ion (Li-Ion) | ||||
---|---|---|---|---|
C | 20V | 4 | 000000000 | 0000000 |

For Battery Voltage | For Number of Batteries | Charging Time, min. | Input Voltage | Plug Type | Cord Length, ft. | Each | |
For Lithium Ion (Li-Ion) Batteries | |||||||
---|---|---|---|---|---|---|---|
12V/14.4V/18V/20V | 1 | 60 | 120V AC | Two Prong | 6 | 000000000 | 0000000 |

For Pipe Size Range | Each | |
2 and up | 0000000 | 000000 |

Overall | |||||||
---|---|---|---|---|---|---|---|
Diameter | Height | For Number of Bits | For Manufacturer Model Number | Includes | Features | Each | |
6" | 3 3/4" | 1 | DCG426B | OD Guard | Adjustable Guide | 0000000 | 0000000 |
Plastic Pipe and Tube Beveler Adapters for Cordless Grinders

Add these adapters onto cordless grinders in order to bevel smooth edges on plastic pipe and tubing, which help you create leak-tight cement connections. They cut using carbide router bits (sold separately). To set the length of the beveled edge and ensure an even bevel all the way around, there’s an adjustable guide that you hold perpendicular to the pipe as you cut. All come with an OD guard, which covers the router bit’s sharp edges and stops plastic shavings from flying out.
Swap OD guards for ID guards if you want to bevel the inside edge of pipe and tubing instead.
Plastic Pipe and Tube Bevelers

Add smooth, beveled edges on plastic pipe and tubing to help you create leak-tight cement connections—these bevelers are quicker and more effective than files and power saws. They have two blades: one that cuts and one that supports the cutting blade, making sure it maintains contact with the pipe. When the cutting blade dulls, you can sharpen it. Adapt these bevelers to fit different pipe OD’s and wall thicknesses using their adjustable guide, which rests against the pipe’s ID. For smooth, continuous rotation, they turn with a crank handle and have a felt-padded V-saddle that sits against the pipe’s OD.
Before you start beveling, clamp the pipe in a vise so it doesn’t turn as you cut.

Cutting Blade | Support Blade | O'all | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Power Source | For Pipe Size Range | For Dia. | For Max. Wall Thick. | Cutting Pattern | Material | No. of Blades Included | Material | No. of Blades Included | Bevel Angle | Mount Type | Lg. | Wd. | Ht. | Wt., lbs. | Features | Each | |
Manual | 1 1/2-8 | 1 7/8"-8 5/8" | 0.73" | Straight Bevel | Carbide | 1 | Carbide | 1 | 15° | Clamp On | 11 1/4" | 6 1/2" | 6 1/4" | 3 | Adjustable Guide, Crank Handle, Felt-Padded V-Saddle | 0000000 | 0000000 |