Made of SBR-coated polyester, these aprons repel water and other nonhazardous liquids. They have a tie in the back.

Rubber coatings keep oil, water, and other liquids from penetrating these aprons. They tie in the back.

Acrylic/Buna-N blend won’t crack in cold conditions. These aprons provide good abrasion resistance and have a soft polyester/cotton backing.

Buna-N coated cotton/polyester is durable, yet more flexible than Buna-N coated polyester. These aprons also withstand solvents.

Buna-N coated polyester is thicker than Buna-N coated cotton/polyester for added durability. In addition to resisting oil, these aprons withstand some solvents.

PVC-coated polyester withstands some exposure to diluted acids in addition to oil but is not recommended for use with chemicals. Aprons with a reinforced stomach have an extra layer of fabric over the stomach for added protection.

Made of Kevlar aramid, these aprons protect against incidental contact with hot surfaces. They have an adjustable strap at the neck and waist; each strap snaps onto the apron on one side, allowing for quick removal.

Use these kits for head-to-toe protection from chemical spills and splashes. They come with everything you need to avoid contact with acetone, gasoline, and other harsh substances.

Protect your torso and thighs when welding.

Cotton is treated to protect against low radiant heat and minor sparks. These aprons tie in the back.

Leather protects against radiant heat, flames, and welding sparks. It’s flexible and resists cuts and abrasion better than cotton. These aprons secure in the back.

Cotton and leather have a reinforced stomach to further protect sensitive areas from cuts and heat. The cotton only portions protect against low radiant heat and minor sparks. These aprons have an adjustable waist strap with a buckle for a quick release.

Carbon/aramid blend protects against radiant heat, flames, and welding sparks, while providing better breathability than leather. It is stitched with Nomex threads for added durability. These aprons have an adjustable waist strap with a buckle for a quick release.

Protect the front of your body from dirt, grime, and other materials. These aprons tie in the back.

Polypropylene offers economical protection in environments where liquid splashes and abrasion resistance are not a concern.

Polyolefin provides excellent resistance against acids and chemical splashes. It is abrasion resistant and holds up to occasional contact with nonhazardous liquids, such as water and paint spray.

Polyethylene is often used in food preparation. It holds up to occasional contact with nonhazardous liquids. Some polyethylene aprons are metal detectable—they have a metal additive that sets off metal detectors if a piece of the apron falls into your line. They’re also blue, so it’s easy to find and remove the piece. They help you comply with Hazard Analysis and Critical Control Point (HACCP) programs to keep contaminated food from leaving your facility.

Tyvek polyethylene provides better tear and abrasion resistance than polypropylene, polyolefin, and polyethylene. It holds up to occasional contact with nonhazardous liquids, such as water and paint spray. It is made of heat- and pressure-bonded fibers for a material that’s soft yet strong.

The Tychem fabric on these aprons shields you from harmful chemical spills and splashes. Tested against hundreds of chemicals at many concentrations each, Tychem is specially formulated to resist degrading or seeping. Don’t worry about rinsing these aprons off after use—they’re designed to be worn once and thrown away.

Tychem 2000 (formerly known as Tychem QC) aprons resist inorganic acids and bases, such as nitric acid and sodium hydroxide.

Tychem 4000 (formerly known as Tychem SL) aprons have a resin film in the coating, which makes them more chemical resistant than Tychem 2000. They hold up against alkalies and harsh acids, such as hydrochloric and hydrofluoric acid.

Easier to clean than other cut-resistant aprons, these chainmail aprons defend against cuts and punctures. Corrosion resistant stainless steel rings hold up to washes and mild cleaning chemicals. This makes them a good fit for food processing plants and other environments with strict sanitation requirements. Each ring is welded fully shut so there are no gaps to trap particles. Even the plastic straps repel liquids, oils, and fats. Snap hooks clip the straps onto the apron.

Also known as cryogenic aprons, these aprons protect against extremely cold materials as low as -320° F, such as liquid nitrogen and dry ice. They have a waterproof shell that repels splashes. Adjust the fit with straps at the neck and waist—each has a buckle for quick removal. The heavier the apron, the more durable it is, but lighter aprons are more comfortable to wear for long periods.

Cordura nylon aprons resist abrasion.

Aramid/cotton/nylon blend aprons are flame resistant, so they’ll protect you if liquid oxygen or other cryogenic materials catch fire. Static-control strips line the inside of the apron to reduce the risk of sparks from static electricity buildup.

Aprons that cannot be sold to the areas listed are restricted due to PFAS regulations.