McMaster-Carr

Search Results

	Voltage Voltage

120V AC

240V AC

12V DC

	For Use With For Use With

	Pump Activation Type Pump Activation Type

	Power Source Power Source

Electric

Battery

	Maximum Flow Rate Maximum Flow Rate

	Discharge Pipe Size Discharge Pipe Size

3/4

1 1/4

1 1/2

	Maximum Feet of Head Maximum Feet of Head

	Duty Cycle Duty Cycle

Intermittent

Continuous

	Housing Material Housing Material

Plastic

Aluminum

Stainless Steel

	Discharge Connection Type Discharge Connection Type

Tube

Pipe

Hose

	Electrical Connection Type Electrical Connection Type

Hardwire

Plug

Battery Cable

	Overall Height Overall Height

	Intake Connection Type Intake Connection Type

Inlet

Hose

	Intake Connection Style Intake Connection Style

Screened

Threaded

	Power Power

	Pump Type Pump Type

Dewatering

Wastewater

	Removes Water Down To Removes Water Down To

	Priming Type Priming Type

Gravity Fed

Initial Fill

	Discharge Connection Style Discharge Connection Style

Barbed

Threaded

Cam-and-Groove

	Cord Length Cord Length

	Current Current

	On/Off Time On/Off Time

1 Hour On Fully Charged
Battery

Continuous When Completely
Submerged

3 Hours On, 30 Minutes Off
When Partially Submerged

8 Hours On When
Completely Submerged

10 Starts per Hour When
Partially Submerged

1 Hour On, 30 Minutes Off
When Partially Submerged

Not Rated

	Maximum Temperature Maximum Temperature

View catalog pages (4)

Forward

How can we improve?

32 Products

About Sump, Water-Removal, Condensate, and Submersible Pumps

Compact Water-Removal Pumps

Also known as bilge pumps, these remove fresh and salt water from spots where other pumps don’t fit. They have an internal sensor, so they turn on when they detect water and turn off when the water is removed. Pumps are fully submersible. They are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry.

Pumps for 12 volts DC have a battery cable connector for use with a 12-volt vehicle battery.

Pumps for 120 volts AC are for use in debris-free water.

12V DC, Single Phase

12 Volts DC

Max. Flow Rate, gpm								Discharge		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	Max. Ft. of Head, ft.	Removes Water Down To	Temp. Range, °F	Sensor Time Interval	Horsepower	Current, A	For Tube ID	Gender	Dia.	Ht.		Each
Hardwire with 2 ft. Cord
5	1	11	1/4"	30° to 140°	2.5 min.	Not Rated	1.6	3/4"	Male	3"	4"	0000000	000000
10	3	10	1/4"	30° to 140°	2.5 min.	Not Rated	3.7	1", 1 1/8"	Male	3"	5"	0000000	000000

120V AC, Single Phase

120 Volts AC

Max. Flow Rate, gpm								Discharge			Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	Max. Ft. of Head, ft.	Removes Water Down To	Temp. Range, °F	Sensor Time Interval	Horsepower	Current	Pipe Size	Thread Type	Gender	Dia.	Ht.	Includes		Each
Hardwire with 8 ft. Cord
20	13	18	1"	40° to 140°	2.5 min.	Not Rated	Not Rated	3/4	NPT	Male	5"	8"	Garden Hose Adapter	0000000	0000000
Hardwire with 24 ft. Cord
20	13	18	1"	40° to 140°	2.5 min.	Not Rated	Not Rated	3/4	NPT	Male	5"	8"	Garden Hose Adapter	0000000	000000

Miniature Water-Removal Pumps with Hose

Complete with a suction strainer and 6 feet of garden hose, this little pump comes ready to clean up small open spaces. It activates when you plug it in. Use with debris-free water.

Maintenance kits (sold separately) include an impeller, an O-ring, and a seal.

Note: The pump must be filled with liquid before use. It needs a constant flow of liquid and cannot run dry.

Max. Flow Rate, gpm									Intake			Discharge			Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	@ 20 Ft. of Head	Max. Ft. of Head, ft.	Removes Water Down To	Temp. Range, °F	Horsepower	Current, A	Thread Size	Thread Type	Gender	Thread Size	Thread Type	Gender	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 6 ft. Cord
5.5	5	4.5	4	43	1/8"	35° to 75°	1/12 hp	2	3/4"	GHT	Male	3/4"	GHT	Male	6"	5"	7"	0000000	0000000

Maintenance Kit

0000000

Each

000000

Heavy Duty Battery-Operated Water-Removal Pumps

This pump has an impact-resistant aluminum housing and handles larger solids than other battery-operated water-removal pumps. Attach it to a 12-volt battery to remove water in locations without power. Pump is gravity fed and requires an elevated liquid source to fully fill the pump before turning on. Do not run dry.

							Discharge			Overall
Max. Flow Rate @ 5 Ft. of Head, gpm	Max. Ft. of Head, ft.	Max. Solids Dia.	Removes Water Down To	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Dia.	Ht.		Each
For 12V DC Battery Voltage—With Thermal Overload Protection
41	20	1/4"	1/4"	35° to 190°	1/3 hp	30	1 1/2	NPT	Female	9 37/64"	22 3/64"	000000	000000000

Battery-Operated Water-Removal Pumps

Remove water in locations without power with these battery-operated pumps. Do not run dry.

Continuous duty pumps attach to a 12-volt battery. They are gravity fed and require an elevated liquid source to fully fill the pump before turning on.

Continuous Duty Pumps

Continuous Duty

Max. Flow Rate, gpm										Discharge		Overall
@ 4 Ft. of Head	@ 5 Ft. of Head	@ 8 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	@ 20 Ft. of Head	Max. Flow Rate	Max. Ft. of Head, ft.	Temp. Range, °F	Current, A	For Tube OD	Gender	Ht.	Wd.	Lg.		Each
15	12	7	__	__	__	20 gpm	18	30° to 120°	12	1 1/4"	Female	8"	6"	6 1/2"	0000000	0000000
45	42	28	25	13	__	65 gpm	22	30° to 120°	20	2"	Female	10 1/2"	5 1/2"	7"	0000000	000000
92	83	57	51	28	8	133 gpm	24	30° to 120°	30	3"	Female	8 1/2"	12"	13 1/2"	0000000	000000

Plastic Water-Removal Pumps

Clean up water in flooded areas without a sump pit. Install these pumps in debris-free water that’s at least 2" deep. They activate when plugged in. You can add a plug-in switch to control when the pump activates. Submerge while in use.

Note: Pumps must be filled with liquid before use. They need a constant flow of liquid and cannot run dry.

Max. Flow Rate, gpm									Discharge			Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	@ 20 Ft. of Head	Max. Ft. of Head, ft.	Removes Water Down To	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Ht.	Wd.	Lg.	Includes		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 8 ft. Cord
19	17	13	8	25	1/8"	35° to 120°	1/4 hp	6	1 1/4	NPT	Female	10"	8"	8"	Garden Hose Adapter	0000000	0000000
29	27	21	12	28	5/8"	35° to 120°	1/3 hp	10	1 1/4	NPT	Female	11"	8"	8"	Garden Hose Adapter	00000000	00000

Impact-Resistant Metal Water-Removal Pumps

An aluminum housing provides excellent impact resistance. Use these pumps to clean up water in flooded areas without a sump pit. Install them in debris-free water that’s at least 2” deep. Pumps activate when plugged in. You can add a plug-in switch to control when the pump activates. Submerge while in use.

Note: Pumps must be filled with liquid before use. They need a constant flow of liquid and cannot run dry.

Max. Flow Rate, gpm									Discharge			Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	@ 20 Ft. of Head	Max. Ft. of Head, ft.	Removes Water Down To	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Ht.	Wd.	Lg.	Includes		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 8 ft. Cord
19	17	13	8	25	1/8"	35° to 120°	1/4 hp	5.6	1 1/4	NPT	Female	9"	7"	7"	Garden Hose Adapter	0000000	0000000
Plug with 25 ft. Cord
19	17	13	8	25	1/8"	35° to 120°	1/4 hp	5.6	1 1/4	NPT	Female	9"	7"	7"	Garden Hose Adapter	0000000	000000

Easy-Carry Water-Removal Pumps without Switch

These pumps activate when plugged in. You can add a plug-in switch to control when the pump activates. Use the handle to carry pumps from job to job. Install in debris-free water that’s at least 3/4" deep. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry.

Max. Flow Rate, gpm									Discharge			Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	@ 20 Ft. of Head	Max. Ft. of Head, ft.	Removes Water Down To	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 10 ft. Cord
18	17	14	9	26.3	1/8"	35° to 120°	1/6 hp	5	1	NPT	Female	8"	7"	5"	00000000	0000000
Plug with 18 ft. Cord
18	17	14	9	26.3	1/8"	35° to 120°	1/6 hp	5	1	NPT	Female	8"	7"	5"	00000000	000000
Plug with 25 ft. Cord
18	17	14	9	26.3	1/8"	35° to 120°	1/6 hp	5	1	NPT	Female	8"	7"	5"	00000000	000000

Float-Switch Activated Easy-Carry Water-Removal Pumps

Use the handle to carry this pump from job to job. A float switch is wired to the pump. Install in debris-free water that’s at least 3/4" deep. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry.

Max. Flow Rate, gpm						Level					Discharge			Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	@ 20 Ft. of Head	Max. Ft. of Head, ft.	Removes Water Down To	Turn-On	Turn-Off	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 10 ft. Cord
18	17	14	9	26.3	1/8"	11"	3"	35° to 120°	1/6 hp	5	1	NPT	Female	9"	7"	5"	00000000	0000000

Long-Life Easy-Carry Water-Removal Pumps

The switch activates on increasing pressure caused by rising water levels for a long service life. It has a separate cord, so you can replace the switch without replacing the whole pump. Use the handle to carry pumps from job to job. Install in debris-free water that’s at least 3/4" deep. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry.

Max. Flow Rate, gpm						Level					Discharge			Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	@ 20 Ft. of Head	Max. Ft. of Head, ft.	Removes Water Down To	Turn-On	Turn-Off	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 10 ft. Cord
18	17	14	9	26.3	1/8"	9"	4"	35° to 120°	1/6 hp	5	1	NPT	Female	8"	8"	5"	00000000	0000000
Plug with 18 ft. Cord
18	17	14	9	26.3	1/8"	3"	1 1/2"	35° to 120°	1/6 hp	5	1	NPT	Female	8"	8"	5"	00000000	000000

Ultra High-Flow Water-Removal Pumps without Switch


	NEMA 5-15
	NEMA 6-15

Move higher volumes of water than with other high-flow water-removal pumps. These pumps activate when plugged in. You can add a plug-in switch to control when the pump activates. A top-discharge design routes water through the pump to cool the motor. Install in water that’s at least 10" deep. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry.

Max. Flow Rate, gpm									Discharge			Overall
@ 10 Ft. of Head	@ 20 Ft. of Head	@ 30 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Removes Water Down To	Temp. Range	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
5-15 NEMA Plug with 25 ft. Cord
70	50	24	36	3/8"	4"	35° to 120°	1/2 hp	10.3	1 1/2	NPT	Female	15"	7"	7"	0000000	0000000
240V AC, Single Phase—With Thermal Overload Protection
6-15 NEMA Plug with 25 ft. Cord
84	65	42	44	3/8"	4"	35° to 120°	3/4 hp	5.7	1 1/2	NPT	Female	16"	7"	7"	0000000	000000
__	82	61	52	3/8"	4"	35° to 120°	1 hp	6.3	1 1/2	NPT	Female	16"	7"	7"	0000000	000000

High-Flow Water-Removal Pumps
with Replaceable Float Switch

These pumps have a powerful motor that provides more than twice the flow rate of standard water-removal pumps to quickly remove large volumes of liquid. The float switch has a separate cord that can unplug, so you can replace the switch without replacing the whole pump. A top-discharge design routes water through the pump to cool the motor. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry.

Install 1/3 horsepower pumps in water that’s at least 2" deep.

Install 1/2 horsepower pumps in water that’s at least 4" deep.

Max. Flow Rate, gpm										Discharge			Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 20 Ft. of Head	@ 30 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Removes Water Down To	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 10 ft. Cord
48	43	23	__	26	3/8"	2"	35° to 120°	1/3 hp	4.9	1 1/4	NPT	Female	9"	6"	6"	00000000	0000000
73	64	44	16	34	3/8"	2"	35° to 120°	1/2 hp	8	1 1/2	NPT	Female	13"	9"	9"	00000000	000000
Plug with 25 ft. Cord
48	43	23	__	26	3/8"	2"	35° to 120°	1/3 hp	4.9	1 1/4	NPT	Female	9"	6"	6"	00000000	000000
73	64	44	16	34	3/8"	2"	35° to 120°	1/2 hp	8	1 1/2	NPT	Female	13"	9"	9"	00000000	000000

High-Flow Water-Removal Pumps without Switch

Pumps have a powerful motor that provides more than twice the flow rate of standard water-removal pumps to quickly remove large volumes of liquid. They activate when plugged in; add a plug-in switch to control when the pump activates. A top-discharge design routes water through the pump to cool the motor. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before during on. Do not run dry.

Install 1/3 horsepower pumps in water that’s at least 2” deep.

Install 1/2 horsepower pumps in water that’s at least 4” deep.

Max. Flow Rate, gpm										Discharge			Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 20 Ft. of Head	@ 30 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Removes Water Down To	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 10 ft. Cord
48	43	23	__	26	3/8"	2"	35° to 120°	1/3 hp	4.9	1 1/4	NPT	Female	9"	6"	6"	00000000	0000000
73	64	44	16	34	3/8"	2"	35° to 120°	1/2 hp	8	1 1/2	NPT	Female	13"	9"	9"	00000000	000000
Plug with 25 ft. Cord
48	43	23	__	26	3/8"	2"	35° to 120°	1/3 hp	4.9	1 1/4	NPT	Female	9"	6"	6"	00000000	000000
73	64	44	16	34	3/8"	2"	35° to 120°	1/2 hp	8	1 1/2	NPT	Female	13"	9"	9"	00000000	000000

Water Removal Pumps with Hose

Use this pump to remove water with small solids up to 1/4" in diameter. It activates when plugged in; add a plug-in switch to control when the pump activates. Install in water that's at least 2" deep. Pump includes a 25-ft. hose with cam-and-groove fittings for quick, secure connections and a storage crate with built-in filtration to protect the pump from debris.

Note: Pump must be filled with liquid before use. It needs a constant flow of liquid and cannot run dry.

Max. Flow Rate, gpm											Discharge		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	@ 20 Ft. of Head	Max. Flow Rate	Max. Ft. of Head, ft.	Max. Solids Dia.	Removes Water Down To	Temp. Range, °F	Horsepower	Current, A	Connection Coupling Size	Gender	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—Without Thermal Overload Protection
Plug with 15" Cord
41	32	23	11	41 gpm	25	1/4"	7/16"	35° to 100°	4/10 hp	3	1 1/4	Male	12 3/4"	11 13/16"	15 3/4"	0000000	0000000

Terms and Conditions and Privacy Policy

About Sump, Water-Removal, Condensate, and Submersible Pumps

Compact Water-Removal Pumps

Miniature Water-Removal Pumps with Hose

Heavy Duty Battery-Operated Water-Removal Pumps

Battery-Operated Water-Removal Pumps

Plastic Water-Removal Pumps

Impact-Resistant Metal Water-Removal Pumps

Easy-Carry Water-Removal Pumps without Switch

Float-Switch Activated Easy-Carry Water-Removal Pumps

Long-Life Easy-Carry Water-Removal Pumps

Ultra High-Flow Water-Removal Pumps without Switch

High-Flow Water-Removal Pumpswith Replaceable Float Switch

High-Flow Water-Removal Pumps without Switch

Water Removal Pumps with Hose

High-Flow Water-Removal Pumps
with Replaceable Float Switch