Less likely to crack or shatter under high torque than standard bits, these are often used with power tools to install machine screws.

The knurled shank on these bits allows finger tightening. They can also be used with the included screwdriver.

A retaining ring grips inside the recess to hold screws in place. These bits have a ball end that allows angled entry to drive screws in hard-to-reach areas.

A magnet holds the nut in place.

An opening at the tip accommodates the pin in the recess of tamper-resistant Torx screws. These are also known as pin-in-Torx bits.

Ribs forged into the wings of these bits grip the screw recess to reduce stripping. They're also known as ACR® bits.

Designed for the fasteners used in electronics assembly, the tip of these bits has slightly sharper corners than Phillips style.

Also known as Robertson bits these are designed for screws with a square recess in the head.

An opening at the tip accommodates the pin in the recess of tamper-resistant hex screws. These are also known as pin-in-hex or pin-in-socket bits.

Grip the indentations on the head of tri-groove fasteners.

Store a variety of sizes and styles of bits and adapters in one compact tray.

Mount the magnetic base to walls, cabinets, and other steel surfaces.

Select any key without unfolding the others in the set. The assorted keys turn multiple fastener sizes.

Bright-colored handles make these tools stand out, so they’re less likely to be misplaced. Sets include an assortment of keys for turning multiple fastener sizes.

Operate these tools like a standard bit driver and access hard-reach fasteners with the offset head. Insert a bit and a magnet holds it in place.

A ratchet mechanism turns fasteners more quickly than a standard bit driver. Insert a bit into the shaft and a magnet holds it in place.

Drive screws four times faster than ratcheting alone. Grip the speed housing at the base of the shaft with one hand while turning the handle with the other. A magnet at the end of the shaft holds bits in place.

LEDs light the tip so you can use these tools in dark areas.

The ball-end tip allows angled entry to turn screws in hard-to-reach areas. These tools are a scaled-down version of standard changeable-shaft screwdrivers, They're shorter, slimmer, and easy to take with you. Remove and replace the shaft to change the tip size.

Remove and replace the reversible shaft to change the tip of the tool. Sets include a handle and multiple shafts.

These assorted keys have a ball end that allows angled entry to make good contact with the screw recess when standard-tip keys can’t. Use to turn screws in hard-to-reach spots.

These assorted keys have a bright finish that's easy to see, so they’re less likely to be misplaced. They turn fasteners from either end and reach into tight spots.

These assorted keys have a ball end that allows angled entry to turn screws in hard-to-reach areas. The bright finish makes them easy to see and less likely to be misplaced.

When a standard-tip key can't make good contact with the recess, a ball end allows angled entry to turn screws in hard-to-reach places. These keys have a zinc coating that resists salt-spray exposure.

Sets include assorted keys with each size a different color for easy identification. When a standard-tip key can't make good contact with the recess, a ball end allows angled entry to turn screws in hard-to-reach places.

The assorted tools in these sets have a flexible joint that provides access to fasteners in hard-to-reach areas.

These assorted keys are made of beryllium copper that is FM approved. They help meet OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Keys turn fasteners from either end and reach into tight spots.

The short bit on these sockets fits in spaces where height clearance is limited.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

Extra-long bits allow access to hard-to-reach fasteners.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Suitable for occasional maintenance work, these sets are imported.

Pivot the head to access fasteners from an angle.

Quickly position these sockets on square fasteners.

A ratchet mechanism allows you to turn fasteners without removing and repositioning the socket.

The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.

Lock your socket into the extension to prevent accidental disengagement..

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.

Lock your socket into the extension to prevent accidental disengagement.

Remove and install dual wheels on trucks and trailers with the sockets in these sets.

Magnets hold sockets securely in place.

Hold different square drive sizes on the four clip rails stored in these trays.

Store sockets on posts marked with the size.

These sets include an assortment of sockets and wrenches for occasional maintenance work.

Keep a selection of extractors on hand to back out a variety of broken parts without damaging the threads around them.

The extractors in this set are matched with the right drill bit sizes as well as bushings to help you drill a centered hole into the broken part.

With a short and stocky design, the extractors in these sets provide a strong grip without needing to drill a deep hole. After drilling, insert the extractor and turn.

The tapered wedge shape of these extractors won’t expand the broken part, making it easier to remove. Sets include the matching drill bit sizes.

Use a square-drive ratchet wrench and socket to turn and extract fasteners.

Use a power tool to quickly extract a fastener.

Use these sets to extract socket head cap screws that have damaged or rounded recesses without drilling.

Use these sets to extract flat-head socket cap screws that have damaged or rounded recesses without drilling.

A more controlled chip removal reduces heat buildup. Use these bits on brittle materials such as block and brick.

Also known as mechanics' bits, these are shorter and more rigid than jobbers’ bits but longer than short-length bits.

Designed to lift chips out of the hole, these bits reduce clogging and improve coolant flow.

The short flutes on these jobbers'-length bits provide increased rigidity for drilling straighter holes.

For the highest accuracy and longest tool life, these solid-carbide bits are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits.

More wear resistant than cobalt steel and high-speed steel, carbide-tipped bits maintain a sharper, harder edge at high temperatures for excellent performance on abrasive material, such as plastic. Because they aren’t as brittle as solid carbide bits, they can be used in less rigid setups, such as a hand-held drill.

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

Also known as spade bits, these have a centering point and two cutting edges for boring holes in hard and soft wood.

The screw point draws the bit in, quickly boring holes without applying pressure.