McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    50 Products

    Square-Neck Flat-Head Plow Bolts
    3D CAD models available

    Image of Product. Front orientation. Plow Bolts. Square-Neck Flat-Head Plow Bolts.
    Image of Specification. Fully Threaded. Back orientation. Contains Annotated. Fully Threaded. Square-Neck Flat-Head Plow Bolts.
    Image of Specification. Partially Threaded. Back orientation. Contains Annotated. Partially Threaded. Square-Neck Flat-Head Plow Bolts.

    Fully Threaded

    Partially Threaded

    Used on heavy equipment, such as plows, these bolts have a smooth, flat head that's angled underneath to sit flush within countersunk holes. A square neck keeps them from turning when tightening a nut. The zinc plating provides corrosion resistance in wet environments. Material meets SAE J429 specifications for quality. Dimensions meet ASME B18.9 specifications. Length is measured from the top of the head. Head height includes the neck.
    Head
    Lg.
    Threading
    Min. Thread
    Lg.
    Thread
    Spacing
    Dia.
    Ht.
    Countersink
    Angle
    Neck
    Wd.
    Tensile
    Strength
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated SAE Grade 5 Steel
     
    3/8"-16 Threads
    1"Fully Threaded__Coarse
    		0.708"0.312"82°
    		0.39"120,000 psiASME B18.9, SAE J42950000000000000000
    1 1/4"Fully Threaded__Coarse
    		0.708"0.312"82°
    		0.39"120,000 psiASME B18.9, SAE J429100000000000000
    1 1/2"Fully Threaded__Coarse
    		0.708"0.312"82°
    		0.39"120,000 psiASME B18.9, SAE J429100000000000000
    2"Fully Threaded__Coarse
    		0.708"0.312"82°
    		0.39"120,000 psiASME B18.9, SAE J4292500000000000000
    2 1/4"Fully Threaded__Coarse
    		0.708"0.312"82°
    		0.39"120,000 psiASME B18.9, SAE J4292500000000000000
    3"Partially Threaded1"Coarse
    		0.708"0.312"82°
    		0.39"120,000 psiASME B18.9, SAE J429100000000000000
     
    7/16"-14 Threads
    1 1/2"Fully Threaded__Coarse
    		0.826"0.364"82°
    		0.45"120,000 psiASME B18.9, SAE J4292500000000000000
    2"Fully Threaded__Coarse
    		0.826"0.364"82°
    		0.45"120,000 psiASME B18.9, SAE J429100000000000000
    2 1/2"Fully Threaded__Coarse
    		0.826"0.364"82°
    		0.45"120,000 psiASME B18.9, SAE J42950000000000000
    3"Fully Threaded__Coarse
    		0.826"0.364"82°
    		0.45"120,000 psiASME B18.9, SAE J42950000000000000
     
    1/2"-13 Threads
    1 1/2"Fully Threaded__Coarse
    		0.945"0.417"82°
    		0.52"120,000 psiASME B18.9, SAE J429100000000000000
    1 3/4"Fully Threaded__Coarse
    		0.945"0.417"82°
    		0.52"120,000 psiASME B18.9, SAE J429100000000000000
    2"Fully Threaded__Coarse
    		0.945"0.417"82°
    		0.52"120,000 psiASME B18.9, SAE J429100000000000000
    2 1/2"Fully Threaded__Coarse
    		0.945"0.417"82°
    		0.52"120,000 psiASME B18.9, SAE J4291000000000000000
    3"Fully Threaded__Coarse
    		0.945"0.417"82°
    		0.52"120,000 psiASME B18.9, SAE J4291000000000000000
    4"Fully Threaded__Coarse
    		0.945"0.417"82°
    		0.52"120,000 psiASME B18.9, SAE J4291000000000000000
     
    5/8"-11 Threads
    2"Fully Threaded__Coarse
    		1.147"0.506"82°
    		0.64"120,000 psiASME B18.9, SAE J42910000000000000
    2 1/2"Partially Threaded1 1/2"Coarse
    		1.147"0.506"82°
    		0.64"120,000 psiASME B18.9, SAE J42910000000000000
    3"Partially Threaded1 1/2"Coarse
    		1.147"0.506"82°
    		0.64"120,000 psiASME B18.9, SAE J42910000000000000
     
    3/4"-10 Threads
    3"Partially Threaded1 3/4"Coarse
    		1.303"0.541"82°
    		0.77"120,000 psiASME B18.9, SAE J42910000000000000
     

    Square-Neck Oval-Head Plow Bolts
    3D CAD models available

    Image of Product. Front orientation. Plow Bolts. Square-Neck Oval-Head Plow Bolts.
    Image of Specification. Fully Threaded. Back orientation. Contains Annotated. Fully Threaded. Square-Neck Oval-Head Plow Bolts.
    Image of Specification. Partially Threaded. Back orientation. Contains Annotated. Partially Threaded. Square-Neck Oval-Head Plow Bolts.

    Fully Threaded

    Partially Threaded

    These bolts have a thicker, domed head that provides greater wear resistance than flat head bolts. Used on heavy equipment, such as plows, these bolts are angled under the head to sit nearly flush within countersunk holes. A square neck keeps them from turning when tightening a nut. The zinc yellow-chromate plating provides corrosion resistance in wet environments. Material meets SAE J429 specifications for quality. Length is measured from the base of the oval top. Head height includes the neck and oval top.
    Head
    Lg.
    Threading
    Min. Thread
    Lg.
    Thread
    Spacing
    Dia.
    Ht.
    Oval Top
    Ht.
    Countersink
    Angle
    Neck
    Wd.
    Tensile
    Strength
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Yellow-Chromate-Plated SAE Grade 8 Steel
     
    5/8"-11 Threads
    1 1/2"Fully Threaded__Coarse
    		1.044"0.616"0.1"82°
    		0.64"150,000 psiSAE J429
    		10000000000000000
    2"Fully Threaded__Coarse
    		1.044"0.616"0.1"82°
    		0.64"150,000 psiSAE J429
    		1000000000000000
    2 1/4"Fully Threaded__Coarse
    		1.044"0.616"0.1"82°
    		0.64"150,000 psiSAE J429
    		1000000000000000
    2 1/2"Partially Threaded1 1/2"Coarse
    		1.044"0.616"0.1"82°
    		0.64"150,000 psiSAE J429
    		500000000000000
    2 3/4"Partially Threaded1 1/2"Coarse
    		1.044"0.616"0.1"82°
    		0.64"150,000 psiSAE J429
    		10000000000000
    3"Partially Threaded1 1/2"Coarse
    		1.044"0.616"0.1"82°
    		0.64"150,000 psiSAE J429
    		500000000000000
    3 1/2"Partially Threaded1 1/2"Coarse
    		1.044"0.616"0.1"82°
    		0.64"150,000 psiSAE J429
    		500000000000000
    4"Partially Threaded1 1/2"Coarse
    		1.044"0.616"0.1"82°
    		0.64"150,000 psiSAE J429
    		10000000000000
     
    3/4"-10 Threads
    2"Fully Threaded__Coarse
    		1.2"0.691"0.11"82°
    		0.77"150,000 psiSAE J429
    		500000000000000
    2 1/4"Fully Threaded__Coarse
    		1.2"0.691"0.11"82°
    		0.77"150,000 psiSAE J429
    		10000000000000
    2 1/2"Fully Threaded__Coarse
    		1.2"0.691"0.11"82°
    		0.77"150,000 psiSAE J429
    		500000000000000
    2 3/4"Partially Threaded1 3/4"Coarse
    		1.2"0.691"0.11"82°
    		0.77"150,000 psiSAE J429
    		500000000000000
    3"Partially Threaded1 3/4"Coarse
    		1.2"0.691"0.11"82°
    		0.77"150,000 psiSAE J429
    		500000000000000
    3 1/2"Partially Threaded1 3/4"Coarse
    		1.2"0.691"0.11"82°
    		0.77"150,000 psiSAE J429
    		500000000000000
    4"Partially Threaded1 3/4"Coarse
    		1.2"0.691"0.11"82°
    		0.77"150,000 psiSAE J429
    		10000000000000
     

    Key-Locking-Neck Flat-Head Plow Bolts
    3D CAD models available

    Image of Product. Front orientation. Plow Bolts. Key-Locking-Neck Flat-Head Plow Bolts.
    Image of Specification. Fully Threaded. Back orientation. Contains Annotated. Fully Threaded. Key-Locking-Neck Flat-Head Plow Bolts.
    Image of Specification. Partially Threaded. Back orientation. Contains Annotated. Partially Threaded. Key-Locking-Neck Flat-Head Plow Bolts.

    Fully Threaded

    Partially Threaded

    Also known as reverse-key plow screws and bucket-tooth bolts, these bolts have a locking key that keeps them from turning when tightening a nut. Often used on heavy equipment, such as plows, they have a smooth, flat head that's angled underneath to sit flush within countersunk holes. Material meets SAE J429 specifications for quality. Length is measured from the top of the head.
    Head
    Lg.
    Threading
    Min. Thread
    Lg.
    Thread
    Spacing
    Dia.
    Ht.
    Countersink
    Angle
    Tensile
    Strength
    Specs.
    Met
    Each
    SAE Grade 8 Steel
     
    5/8"-11 Threads
    2"Fully Threaded__Coarse
    		1.121"0.414"60°
    		150,000 psiSAE J429
    		00000000000000
    2 1/2"Partially Threaded1 1/2"Coarse
    		1.121"0.414"60°
    		150,000 psiSAE J429
    		0000000000000
    3"Partially Threaded1 1/2"Coarse
    		1.121"0.414"60°
    		150,000 psiSAE J429
    		0000000000000
    3 1/2"Partially Threaded1 1/2"Coarse
    		1.121"0.414"60°
    		150,000 psiSAE J429
    		0000000000000
    4"Partially Threaded1 1/2"Coarse
    		1.121"0.414"60°
    		150,000 psiSAE J429
    		0000000000000
    5"Partially Threaded1 1/2"Coarse
    		1.121"0.414"60°
    		150,000 psiSAE J429
    		0000000000000
     
    3/4"-10 Threads
    3"Partially Threaded1 3/4"Coarse
    		1.277"0.44"60°
    		150,000 psiSAE J429
    		0000000000000
    3 1/2"Partially Threaded1 3/4"Coarse
    		1.277"0.44"60°
    		150,000 psiSAE J429
    		0000000000000
    4"Partially Threaded1 3/4"Coarse
    		1.277"0.44"60°
    		150,000 psiSAE J429
    		0000000000000
    4 1/2"Partially Threaded1 3/4"Coarse
    		1.277"0.44"60°
    		150,000 psiSAE J429
    		00000000000000
    5"Partially Threaded1 3/4"Coarse
    		1.277"0.44"60°
    		150,000 psiSAE J429
    		00000000000000
    6"Partially Threaded1 3/4"Coarse
    		1.277"0.44"60°
    		150,000 psiSAE J429
    		00000000000000
     
    7/8"-9 Threads
    3 1/2"Partially Threaded2"Coarse
    		1.516"0.616"60°
    		150,000 psiSAE J429
    		00000000000000
    4"Partially Threaded2"Coarse
    		1.516"0.616"60°
    		150,000 psiSAE J429
    		00000000000000
    4 1/2"Partially Threaded2"Coarse
    		1.516"0.616"60°
    		150,000 psiSAE J429
    		00000000000000
     
    back to top