Blankets are for intermittent contact with flames and hot surfaces.

Made with Kevlar to resist abrasion, scratches, tears, and punctures.

These curtains are for intermittent contact with flames and hot surfaces.

Cut with scissors or a utility knife to cover irregularly shaped electrical hazards.

Wrap these guards around grip pullers, presses, and other moving equipment to protect yourself from flying debris.

Cut with scissors to create custom curtains—they have grommets and are ready to hang.

Cut with scissors to create custom see-through curtains—they have grommets and are ready to hang.

Cut with scissors to create custom curtains—they have grommets and are ready to hang. A vinyl coating provides oil resistance.

Protect against hot and cold temperature changes. These tarps have an insulating foam core covered by a reinforced outer cover. They are silver on one side to reflect sunlight and black on the other for UV resistance.

Let air in while keeping water out. Stronger than our other breathable tarps, these are UV, abrasion, and tear resistant.

Make sure covered objects get noticed. These tarps are bright yellow and orange with a contrasting border along each edge. They're UV, abrasion, and tear resistant.

The most heat-resistant tarps we offer, these resist flames and molten metal splatter.

The most puncture-, abrasion-, and tear-resistant tarps we offer.

Protect equipment against condensation buildup and corrosion with these specially treated tarps.

Keep equipment and other objects cool. These tarps are silver on one side to reflect sunlight and black on the other for UV resistance.

A magnet sewn into each corner keeps these tarps in place on equipment.

The most common of our flexible high-temperature sheets, these are used to insulate furnaces.

Commonly used in furnaces and engine compartments, these flexible silica fiber sheets resist corrosive acids.

The lowest-density insulation we offer, these sheets are made of lightweight melamine foam.

Insulate high-vacuum furnaces and other low-oxygen vacuum enclosures with these flexible sheets.

Often used in high-humidity applications for its low moisture absorption, this flexible paper insulation is made of inorganic materials. It’s typically used in appliances and electrical devices.

Insulate high-vacuum furnaces and other low-oxygen vacuum enclosures with these rigid sheets. They withstand higher temperatures when used in a vacuum and can be machined through sawing or drilling.

The fiberglass facing on these flexible silicone foam sheets protects against highly abrasive conditions and resists tearing.

These durable sheets resist compression and are often used in oven and power-generating applications.

Shield against extreme heat with these flexible ceramic strips. They are often used to insulate hose, cables, and process piping.

Soft and easy to install, this insulation restricts absorption of water, air, and gas. It is often used on cold and hot water lines and refrigeration lines.

Superior in strength and durability, these thin strips insulate as well as protect personnel from accidental contact with hot pipes. Use for exhaust, hot water, and process pipes.

Able to withstand temperatures as low as -290° F, these super-thin, lightweight sheets are made of fiber-reinforced silica aerogel that can flex into tight spaces other insulation can't. Use in process piping and power-generating applications.

Protect insulation from light impact and moisture with this durable PVC jacketing.

Wrap rectangular and round ductwork with this flexible insulation.

Also known as fire wrap, these flame-resistant sheets meet ASTM E84 0/0 for flame and smoke and create a fire barrier around rectangular and round ductwork. They are often used to wrap kitchen grease exhaust ducts and air ducts.

Use these sheets in operating temperatures below 32° F, such as cold-storage applications.

With larger openings than porous fiberglass fabric, these sheets allow for more air circulation in drying applications.

These sheets can be grounded to reduce static electricity.

These sheets are 50% more tear resistant than other fiberglass fabric sheets.

A blend of aramid and fiberglass, this fabric resists mildew and abrasion. It is self-extinguishing and won't melt, so it's often used for insulation applications.

Similar to plaster, these adhesive-impregnated sheets and strips become moldable when water is added and harden as they dry. They can be used in sealing, insulating, and covering applications.

Often used to create curtains and screens, this fabric has an aluminum foil backing that deflects radiant heat.

This temperature-resistant fabric is more cut resistant than Nomex.

Even when exposed for as long as 2 minutes to temperatures up to 2600° F, these sheets won't ignite or melt.

More flexible than standard silica fabric, wrap these sheets and strips to insulate pipes, wires, and hose. This fabric also protects against welding spatter.

Saturated with wax, these sheets also have a polyester coating on one side to resist corrosion and moisture. Protect piping and wrap irregularly shaped objects with this very flexible fabric.

This cotton fabric is treated to resist flames. Use as tarps.

This low-pile velvet cushions and damps vibration.

Often used as outdoor equipment covers and pit liners, this material combines UV, water, and mildew resistance with tear resistance.

The neoprene coating on these nylon sheets resists UV rays as well as solvents and oil.

Made from a blended material for a longer life, these are the strongest and most durable shipping blankets we offer.

Also known as heat blankets, these heaters completely surround containers for fast heating and increased heat retention in unheated and drafty areas.

For applications requiring high heat over long periods of time, these aluminized steel heaters warm up faster and are more durable than silicone rubber heaters.

These heaters require a separate temperature switch or controller to regulate heat output.

Also known as foil heaters, these bend around corners and edges without causing damage to the heating element.

Grommets along one side make it easy to install these sheets around your facility and quiet noisy areas. Made of vinyl-coated fiberglass, they resist abrasion, oil, dirt, moisture, and most solvents.

Also known as egg crate, these sheets have peaks and valleys that absorb more sound at higher frequencies than flat-surface sheets. Use them to quiet noisy areas and line machine enclosures. Sheets are made of humidity-resistant polyurethane foam.

Use these sheets to quiet noisy areas and line machine enclosures. They’re made of humidity-resistant polyurethane foam and have a smooth, easy-to-clean facing.

Furnished with two hangers for easy mounting around your facility, these sheets quiet noisy areas. Made of melamine foam, they are peaked on both sides for good sound absorption in large open spaces.

These polypropylene foam sheets will not degrade if exposed to moisture and occasional salt water spray. Use them to quiet noisy areas and line machine enclosures.

Set up these free-standing partitions to reflect sound and block noise from traveling to other parts of your facility. A vinyl barrier is sandwiched between two vinyl-coated fiberglass absorbers.

Reflect sound and block noise from traveling to other parts of your facility.

Pile debris on one of these heavy duty tarps for convenient removal. Also called roofers tear-off tarps, they are waterproof and puncture resistant.