Use in dust collection systems. The slide pushes through the top of the gate to clear debris.

Often added to existing systems, these gates install without disassembling duct. Also known as half gates.

Made of PVC plastic to withstand acids, alkalies, salts, and other corrosive vapors and fumes.

Maintain and repair these valves while they’re still inline—you can disassemble the stem so there's no need to unthread the pipe connections. Also known as gate valves, they open and close gradually to prevent sudden starts and stops.

Prevent boiler scale deposits and sediment buildup with these valves designed to meet ASME standards for boiler drainage applications.

A threaded union on these valves makes them easy to install and remove without disrupting your line.

These valves have a sharp gate that slices through thick slurries, wastewater, dry bulk solids, and other materials that would clog other gradual on/off valves.

With a forged steel body and bolted construction, these valves can withstand nearly 10 times the pressure of other socket-connect gradual valves.

For a leak-tight connection, crimp the press-connect fittings on these valves to metal tubing with a crimping tool—no heat or soldering required. They open and close gradually as the wheel handle turns, preventing sudden starts and stops of flow.

For use with threaded pipe, these valves have NPT connections.

Easier to install and remove for maintenance than threaded and weld-on valves, these valves bolt and unbolt to flanges. They meet NSF/ANSI 61 for safe use in drinking water systems.

For a leak-tight connection in drinking water lines without heat or soldering, crimp the fittings on these valves to metal tubing with a press-connect crimping tool. They open and close gradually with multiple turns of the handle wheel to prevent jolts from sudden stops and starts.