We will reply to your message within an hour.
A high-strength alternative to blind rivets, use these screws when only one side of the material is accessible.
Wedge these hangers in concrete and other solid materials.
A zinc plating provides corrosion resistance in wet environments.
These 18-8 stainless steel anchors have good chemical resistance.
An open-end cap nut provides a finished appearance.
The removable flat head provides a flush finish in countersunk holes.
More corrosion resistant than 18-8 stainless steel anchors, these 316 stainless steel anchors have excellent resistance to chemicals and salt water.
These steel anchors are available with corrosion-resistant finishes.
Keep fixtures solidly in place—these anchors have two locking wedges that won't shake loose.
Install like a stud anchor—just thread the anchor, a nut, and a washer onto the end of a threaded rod, drive into a hole, and turn the nut to expand the base. Also known as rod anchors, they're often used with threaded rod to hang pipe and wiring.
A PVC coating minimizes the chance of scratching the surface of your material. These rivet nuts are more corrosion resistant than zinc-plated steel rivet nuts.
The coated flange seals out moisture and prevents corrosion.
These rivet nuts are mildly corrosion resistant.
About twice as strong as aluminum rivet nuts, these steel rivet nuts are zinc plated for mild corrosion resistance.
The most corrosion resistant twist-resistant rivet nuts we offer, these stand up to chemicals.
These aluminum rivet nuts are one-third the weight of steel rivet nuts and have mild corrosion resistance.
A hex-shaped body provides the highest twist resistance of any rivet nut.
Wedges under the flange lock the nut in place in soft materials such as brass and aluminum.
About twice as strong as aluminum rivet nuts, these rivet nuts are zinc plated for mild corrosion resistance.
These kits include one size of low-profile rivet nuts.
About twice as strong as aluminum rivet nuts, these low-profile rivet nuts have a cadmium or tin-zinc plating for corrosion resistance.
The most corrosion resistant low-profile rivet nuts we offer, these stand up to chemicals.
These low-profile rivet nuts are one-third the weight of steel and have mild corrosion resistance.
Once installed these rivet nuts have a large back flange that distributes the load across a broad area for a strong hold in plastic and composites.
The thread area is enclosed, which prevents leakage past the threads from either side of your application.
A PVC foam seal under the flange keeps liquids and gasses from leaking between the nut and the surrounding material.
A nonconductive rubber coating insulates the nut from electricity, seals out moisture, and damps vibration.
Threads float inside the nut so you can install a screw at a slight angle to align with off-center parts. They’re also known as Riv-Float nuts.
Use these rivet nuts for light duty fastening in low-clearance applications. Assortments include rivet nuts, mandrels, and an installation tool.
These rivet nuts have a smooth body and fit in smaller holes than twist-resistant rivet nuts. Assortments include rivet nuts, mandrels, nosepieces, and a plier-style installation tool.
A ribbed-shaped body holds the nut in place so it won't move when tightening a screw. Assortments contain rivet nuts, mandrels, nosepieces, and a plier-style installation tool.