Reduce the arbor hole size on a flap sanding wheel so that it fits the shaft on your tool.

Adapt flap wheels with a threaded stud for use on tools that have a threaded spindle.

Reduce the arbor hole size on a wheel brush so that it fits the shaft on your tool.

Mount wheel brushes that have an arbor hole to hand-held drills and die grinders.

Attach cutoff wheels to a Dremel grinder.

The arbor’s shank attaches to hand-held drills and die grinders. Threads on the body hold the sanding roll in place.

Install cutoff wheels, grinding wheels, and other abrasive discs to the threaded shaft on bench-top motors, grinders, and buffers.

Thread one of these backup pads onto the tool’s arbor, then attach a sanding disc and secure with the disc nut.

Designed to rotate independently of the disc, these pads clear material buildup on the abrasive surface for longer disc life.

Holes in the pad align with holes in the sanding disc for a clearer view of the sanding surface.

Mount one of these pads onto the tool's arbor.

Thread the stud into the tool's spindle.

Secure the shank into the collet or chuck of your tool. Attach the quick-change fastener on the sanding disc to the corresponding fastener on the backup pad.

Thread these pads onto the tool’s arbor.

Attach to grinder and buffer shafts to hold buffing wheels with shanks.

Mount to the straight shaft on your grinder or buffer.

No tools required—twist the drum head by hand to tighten the sanding sleeve to the drum.

Slide a sanding sleeve on the drum and tighten the nut or screw to securely hold the sleeve.