Thread Size Thread Size |
|---|
Mount Type Mount Type |
|---|
 |  |
| Bolt On | Threaded Hole |
 |  |
| Screw | Threaded Stud |
Capacity per Mount Capacity per Mount |
|---|
|
Overall Height Overall Height |
|---|
Mounting Hole Center-to-Center Mounting HoleCenter-to-Center |
|---|
Hardness Rating Hardness Rating |
|---|
|
|
Base Material Base Material |
|---|
|
|
Shear Capacity per Mount Shear Capacity per Mount |
|---|
|
Hardness Hardness |
|---|
|
Mounting Hole Diameter Mounting Hole Diameter |
|---|
|
|
|
Deflection @ Capacity Deflection @ Capacity |
|---|
|
Base Width Base Width |
|---|
Base Length Base Length |
|---|
Diameter Diameter |
|---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
About Vibration-Damping Mounts
More
About Leveling Mounts
More
General Purpose Bolt-Down Vibration-Damping Mounts with Threaded Hole
1
2
3
4
5
6
7
These mounts bolt to your mounting surface to keep your equipment stationary. Use them in compression load applications with rotating equipment such as fans, blowers, pumps, compressors, and generators.
Neoprene rubber has good resistance to oil and gasoline.
Silicone rubber withstands higher temperatures than neoprene rubber.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Pitch, mm | Capacity per Mount, lbs. | Deflection @ Capacity | O'all Ht. | Dia. | Base Lg. | Base Wd. | Hardness | Temperature Range, °F | Features | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Each | ||
Black Neoprene Rubber with Steel Base | |||||||||||||||||
| 1 | 5/16"-18 | __ | 50 | 0.12" | 1" | 1.2" | 3.13" | 1.75" | Durometer 40A | 10° to 180° | __ | No | 2 | 0.34" | 2.38" | 00000000 | 00000 |
| 1 | 5/16"-18 | __ | 80 | 0.12" | 1" | 1.2" | 3.13" | 1.75" | Durometer 50A | 10° to 180° | __ | No | 2 | 0.34" | 2.38" | 00000000 | 0000 |
| 1 | 5/16"-18 | __ | 110 | 0.12" | 1" | 1.2" | 3.13" | 1.75" | Durometer 60A | 10° to 180° | __ | No | 2 | 0.34" | 2.38" | 00000000 | 0000 |
| 1 | 5/16"-18 | __ | 160 | 0.12" | 1" | 1.2" | 3.13" | 1.75" | Durometer 70A | 10° to 180° | __ | No | 2 | 0.34" | 2.38" | 00000000 | 0000 |
| 2 | 3/8"-16 | __ | 130 | 0.12" | 1.12" | 1.83" | 3.75" | 2.25" | Durometer 40A | 10° to 180° | __ | No | 2 | 0.34" | 3" | 00000000 | 0000 |
| 2 | 3/8"-16 | __ | 250 | 0.12" | 1.12" | 1.83" | 3.75" | 2.25" | Durometer 50A | 10° to 180° | __ | No | 2 | 0.34" | 3" | 00000000 | 0000 |
| 2 | 3/8"-16 | __ | 350 | 0.12" | 1.12" | 1.83" | 3.75" | 2.25" | Durometer 60A | 10° to 180° | __ | No | 2 | 0.34" | 3" | 00000000 | 0000 |
| 2 | 3/8"-16 | __ | 480 | 0.12" | 1.12" | 1.83" | 3.75" | 2.25" | Durometer 70A | 10° to 180° | __ | No | 2 | 0.34" | 3" | 00000000 | 0000 |
| 2 | 1/2"-20 | __ | 130 | 0.12" | 1.12" | 1.83" | 3.75" | 2.25" | Durometer 40A | 10° to 180° | __ | No | 2 | 0.34" | 3" | 00000000 | 0000 |
| 2 | 1/2"-20 | __ | 250 | 0.12" | 1.12" | 1.83" | 3.75" | 2.25" | Durometer 50A | 10° to 180° | __ | No | 2 | 0.34" | 3" | 00000000 | 0000 |
| 2 | 1/2"-20 | __ | 350 | 0.12" | 1.12" | 1.83" | 3.75" | 2.25" | Durometer 60A | 10° to 180° | __ | No | 2 | 0.34" | 3" | 00000000 | 0000 |
| 2 | 1/2"-20 | __ | 480 | 0.12" | 1.12" | 1.83" | 3.75" | 2.25" | Durometer 70A | 10° to 180° | __ | No | 2 | 0.34" | 3" | 00000000 | 0000 |
| 3 | 1/2"-13 | __ | 1,500 | 0.25" | 1.63" | 3" | 6.25" | 4.63" | Durometer 40A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 00000 |
| 3 | 1/2"-13 | __ | 1,500 | 0.5" | 2.75" | 3" | 6.25" | 4.63" | Durometer 40A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 00000 |
| 4 | 1/2"-13 | __ | 60 | 0.2" | 1.5" | 1.53" | 4.41" | 2" | Durometer 48A | -20° to 180° | __ | No | 2 | 0.41" | 3.75" | 000000000 | 00000 |
| 4 | 1/2"-13 | __ | 100 | 0.2" | 1.5" | 1.53" | 4.41" | 2" | Durometer 56A | -20° to 180° | __ | No | 2 | 0.41" | 3.75" | 000000000 | 00000 |
| 4 | 1/2"-13 | __ | 130 | 0.2" | 1.5" | 1.53" | 4.41" | 2" | Durometer 64A | -20° to 180° | __ | No | 2 | 0.41" | 3.75" | 000000000 | 00000 |
| 4 | 1/2"-13 | __ | 200 | 0.2" | 1.5" | 1.53" | 4.41" | 4" | Durometer 56A | -20° to 180° | __ | No | 2 | 0.41" | 3.75" | 000000000 | 00000 |
| 4 | 1/2"-13 | __ | 260 | 0.2" | 1.5" | 1.53" | 4.41" | 4" | Durometer 64A | -20° to 180° | __ | No | 2 | 0.41" | 3.75" | 000000000 | 00000 |
| 4 | 1/2"-13 | __ | 700 | 0.25" | 1.61" | 3.125" | 5.125" | 3" | Durometer 40A | -20° to 180° | __ | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
| 4 | 1/2"-13 | __ | 1,000 | 0.25" | 1.61" | 3.125" | 5.125" | 3" | Durometer 50A | -20° to 180° | __ | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
| 4 | 1/2"-13 | __ | 1,500 | 0.19" | 1.61" | 5.31" | 7.25" | 3" | Durometer 50A | -20° to 180° | __ | No | 2 | 0.44" | 6.25" | 000000000 | 000000 |
| 4 | 1/2"-13 | __ | 1,500 | 0.25" | 1.61" | 3.125" | 5.125" | 3" | Durometer 60A | -20° to 180° | __ | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
| 4 | 1/2"-13 | __ | 2,000 | 0.19" | 1.61" | 5.31" | 7.25" | 3" | Durometer 60A | -20° to 180° | __ | No | 2 | 0.44" | 6.25" | 000000000 | 000000 |
| 4 | 1/2"-13 | __ | 2,500 | 0.25" | 1.61" | 3.125" | 5.125" | 3" | Durometer 70A | -20° to 180° | __ | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
| 4 | 1/2"-13 | __ | 3,000 | 0.19" | 1.61" | 5.31" | 7.25" | 3" | Durometer 70A | -20° to 180° | __ | No | 2 | 0.44" | 6.25" | 000000000 | 000000 |
| 4 | 1/2"-13 | __ | 4,400 | 0.19" | 1.61" | 5.31" | 7.25" | 3" | Durometer 80A | -20° to 180° | __ | No | 2 | 0.44" | 6.25" | 000000000 | 000000 |
| 4 | 3/4"-10 | __ | 700 | 0.25" | 1.5" | 3.125" | 5.125" | 3" | Durometer 40A | -20° to 180° | __ | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
| 4 | 3/4"-10 | __ | 1,000 | 0.25" | 1.5" | 3.125" | 5.125" | 3" | Durometer 50A | -20° to 180° | __ | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
| 4 | 3/4"-10 | __ | 1,500 | 0.25" | 1.5" | 3.125" | 5.125" | 3" | Durometer 70A | -20° to 180° | __ | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
| 4 | M12 | 1.75 | 700 | 0.25" | 1.61" | 3.125" | 5.125" | 3" | Durometer 40A | -20° to 180° | __ | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
| 4 | M12 | 1.75 | 1,000 | 0.25" | 1.61" | 3.125" | 5.125" | 3" | Durometer 50A | -20° to 180° | __ | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
| 4 | M12 | 1.75 | 1,500 | 0.25" | 1.61" | 3.125" | 5.125" | 3" | Durometer 60A | -20° to 180° | __ | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
| 4 | M12 | 1.75 | 2,500 | 0.25" | 1.61" | 3.125" | 5.125" | 3" | Durometer 70A | -20° to 180° | __ | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
| 5 | 5/16"-18 | __ | 45 | 0.35" | 1.5" | 1.19" | 3.19" | 1.63" | Durometer 30A | -20° to 225° | __ | No | 2 | 0.31" | 2.38" | 00000000 | 00000 |
| 5 | 5/16"-18 | __ | 75 | 0.35" | 1.5" | 1.19" | 3.19" | 1.63" | Durometer 40A | -20° to 225° | __ | No | 2 | 0.31" | 2.38" | 0000000 | 00000 |
| 5 | 5/16"-18 | __ | 125 | 0.35" | 1.5" | 1.19" | 3.19" | 1.63" | Durometer 50A | -20° to 225° | __ | No | 2 | 0.31" | 2.38" | 00000000 | 00000 |
| 5 | 3/8"-16 | __ | 150 | 0.4" | 1.88" | 1.75" | 3.88" | 2.31" | Durometer 40A | -20° to 225° | __ | No | 2 | 0.31" | 3" | 0000000 | 00000 |
| 5 | 3/8"-16 | __ | 380 | 0.4" | 1.88" | 1.75" | 3.88" | 2.31" | Durometer 60A | -20° to 225° | __ | No | 2 | 0.31" | 3" | 0000000 | 00000 |
| 5 | 3/8"-16 | __ | 600 | 0.4" | 1.88" | 1.75" | 3.88" | 2.31" | Durometer 70A | -20° to 225° | __ | No | 2 | 0.31" | 3" | 00000000 | 00000 |
| 5 | 1/2"-13 | __ | 600 | 0.5" | 2.75" | 2.56" | 5.5" | 3.31" | Durometer 60A | -20° to 225° | __ | No | 2 | 0.5" | 4.13" | 00000000 | 00000 |
| 5 | 1/2"-13 | __ | 1,000 | 0.5" | 2.75" | 2.56" | 5.5" | 3.31" | Durometer 70A | -20° to 225° | __ | No | 2 | 0.5" | 4.13" | 00000000 | 00000 |
| 5 | 1/2"-13 | __ | 2,100 | 0.5" | 2.75" | 3.38" | 6.25" | 4" | Durometer 70A | -20° to 225° | __ | No | 2 | 0.5" | 5" | 00000000 | 00000 |
| 5 | 1/2"-13 | __ | 4,300 | 0.5" | 2.75" | 3.38" | 6.75" | 4.38" | Durometer 70A | -20° to 225° | __ | No | 2 | 0.5" | 5.5" | 00000000 | 00000 |
| 6 | 5/8"-11 | __ | 1,500 | 0.03" | 1.19" | 4" | 7" | 2.5" | Durometer 65A | 0° to 180° | __ | No | 2 | 0.66" | 5.5" | 00000000 | 00000 |
| 6 | 5/8"-11 | __ | 3,000 | 0.03" | 1.19" | 4" | 7" | 4" | Durometer 60A | 0° to 180° | __ | No | 2 | 0.66" | 5.5" | 00000000 | 000000 |
Black Silicone Rubber with Silicone Rubber Base | |||||||||||||||||
| 1 | 5/16"-18 | __ | 35 | 0.2" | 1" | 1.25" | 3.13" | 1.75" | Durometer 30A | -80° to 300° | __ | No | 2 | 0.34" | 2.38" | 0000000 | 00000 |
| 1 | 5/16"-18 | __ | 35 | 0.4" | 1.25" | 1.25" | 3.13" | 1.75" | Durometer 30A | -80° to 300° | __ | No | 2 | 0.34" | 2.38" | 0000000 | 00000 |
| 1 | 3/8"-16 | __ | 135 | 0.25" | 1.25" | 1.75" | 3.88" | 2.38" | Durometer 30A | -80° to 300° | __ | No | 2 | 0.34" | 3" | 0000000 | 00000 |
| 1 | 3/8"-16 | __ | 135 | 0.5" | 1.75" | 1.75" | 3.88" | 2.38" | Durometer 30A | -80° to 300° | __ | No | 2 | 0.34" | 3" | 0000000 | 00000 |
Gray Neoprene Rubber with Steel Base | |||||||||||||||||
| 3 | 1/2"-13 | __ | 4,000 | 0.25" | 1.63" | 3" | 6.25" | 4.63" | Durometer 70A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 00000 |
| 3 | 1/2"-13 | __ | 4,000 | 0.5" | 2.75" | 3" | 6.25" | 4.63" | Durometer 70A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 00000 |
Green Neoprene Rubber with Steel Base | |||||||||||||||||
| 3 | 1/2"-13 | __ | 3,000 | 0.25" | 1.63" | 3" | 6.25" | 4.63" | Durometer 60A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 00000 |
| 3 | 1/2"-13 | __ | 3,000 | 0.5" | 2.75" | 3" | 6.25" | 4.63" | Durometer 60A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 00000 |
Green Silicone Rubber with Silicone Rubber Base | |||||||||||||||||
| 1 | 5/16"-18 | __ | 45 | 0.2" | 1" | 1.25" | 3.13" | 1.75" | Durometer 40A | -80° to 300° | __ | No | 2 | 0.34" | 2.38" | 0000000 | 00000 |
| 1 | 5/16"-18 | __ | 45 | 0.4" | 1.25" | 1.25" | 3.13" | 1.75" | Durometer 40A | -80° to 300° | __ | No | 2 | 0.34" | 2.38" | 0000000 | 00000 |
| 1 | 3/8"-16 | __ | 170 | 0.25" | 1.25" | 1.75" | 3.88" | 2.38" | Durometer 40A | -80° to 300° | __ | No | 2 | 0.34" | 3" | 0000000 | 00000 |
| 1 | 3/8"-16 | __ | 170 | 0.5" | 1.75" | 1.75" | 3.88" | 2.38" | Durometer 40A | -80° to 300° | __ | No | 2 | 0.34" | 3" | 0000000 | 00000 |
| 1 | 1/2"-13 | __ | 250 | 0.25" | 1.75" | 2.5" | 5.5" | 3.38" | Durometer 40A | -80° to 300° | __ | No | 2 | 0.56" | 4.13" | 0000000 | 00000 |
| 1 | 1/2"-13 | __ | 250 | 0.5" | 2.88" | 2.5" | 5.5" | 3.38" | Durometer 40A | -80° to 300° | __ | No | 2 | 0.56" | 4.13" | 0000000 | 00000 |
Orange Silicone Rubber with Silicone Rubber Base | |||||||||||||||||
| 1 | 5/16"-18 | __ | 70 | 0.2" | 1" | 1.25" | 3.13" | 1.75" | Durometer 50A | -80° to 300° | __ | No | 2 | 0.34" | 2.38" | 0000000 | 00000 |
| 1 | 5/16"-18 | __ | 70 | 0.4" | 1.25" | 1.25" | 3.13" | 1.75" | Durometer 50A | -80° to 300° | __ | No | 2 | 0.34" | 2.38" | 0000000 | 00000 |
| 1 | 5/16"-18 | __ | 120 | 0.2" | 1" | 1.25" | 3.13" | 1.75" | Durometer 60A | -80° to 300° | __ | No | 2 | 0.34" | 2.38" | 0000000 | 00000 |
| 1 | 5/16"-18 | __ | 120 | 0.4" | 1.25" | 1.25" | 3.13" | 1.75" | Durometer 60A | -80° to 300° | __ | No | 2 | 0.34" | 2.38" | 0000000 | 00000 |
| 1 | 3/8"-16 | __ | 240 | 0.25" | 1.25" | 1.75" | 3.88" | 2.38" | Durometer 50A | -80° to 300° | __ | No | 2 | 0.34" | 3" | 0000000 | 00000 |
| 1 | 3/8"-16 | __ | 240 | 0.5" | 1.75" | 1.75" | 3.88" | 2.38" | Durometer 50A | -80° to 300° | __ | No | 2 | 0.34" | 3" | 0000000 | 00000 |
| 1 | 3/8"-16 | __ | 380 | 0.25" | 1.25" | 1.75" | 3.88" | 2.38" | Durometer 60A | -80° to 300° | __ | No | 2 | 0.34" | 3" | 0000000 | 00000 |
| 1 | 3/8"-16 | __ | 380 | 0.5" | 1.75" | 1.75" | 3.88" | 2.38" | Durometer 60A | -80° to 300° | __ | No | 2 | 0.34" | 3" | 0000000 | 00000 |
| 1 | 3/8"-16 | __ | 550 | 0.25" | 1.25" | 1.75" | 3.88" | 2.38" | Durometer 70A | -80° to 300° | __ | No | 2 | 0.34" | 3" | 0000000 | 00000 |
| 1 | 3/8"-16 | __ | 550 | 0.5" | 1.75" | 1.75" | 3.88" | 2.38" | Durometer 70A | -80° to 300° | __ | No | 2 | 0.34" | 3" | 0000000 | 00000 |
| 1 | 1/2"-13 | __ | 525 | 0.25" | 1.75" | 2.5" | 5.5" | 3.38" | Durometer 50A | -80° to 300° | __ | No | 2 | 0.56" | 4.13" | 0000000 | 00000 |
| 1 | 1/2"-13 | __ | 525 | 0.5" | 2.88" | 2.5" | 5.5" | 3.38" | Durometer 50A | -80° to 300° | __ | No | 2 | 0.56" | 4.13" | 0000000 | 00000 |
| 1 | 1/2"-13 | __ | 750 | 0.25" | 1.75" | 2.5" | 5.5" | 3.38" | Durometer 60A | -80° to 300° | __ | No | 2 | 0.56" | 4.13" | 0000000 | 00000 |
| 1 | 1/2"-13 | __ | 750 | 0.5" | 2.88" | 2.5" | 5.5" | 3.38" | Durometer 60A | -80° to 300° | __ | No | 2 | 0.56" | 4.13" | 0000000 | 00000 |
| 1 | 1/2"-13 | __ | 1,100 | 0.25" | 1.75" | 2.5" | 5.5" | 3.38" | Durometer 70A | -80° to 300° | __ | No | 2 | 0.56" | 4.13" | 0000000 | 00000 |
| 1 | 1/2"-13 | __ | 1,100 | 0.5" | 2.88" | 2.5" | 5.5" | 3.38" | Durometer 70A | -80° to 300° | __ | No | 2 | 0.56" | 4.13" | 0000000 | 00000 |
Red Neoprene Rubber with Steel Base | |||||||||||||||||
| 3 | 1/2"-13 | __ | 2,250 | 0.25" | 1.63" | 3" | 6.25" | 4.63" | Durometer 50A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 00000 |
| 3 | 1/2"-13 | __ | 2,250 | 0.5" | 2.75" | 3" | 6.25" | 4.63" | Durometer 50A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 00000 |
Neoprene Rubber | |||||||||||||||||
| 7 | 1/4"-20 | __ | 14 | 0.01" | 1.125" | 2.313" | 2.375" | 2.375" | Durometer 40A | -20° to 180° | Zinc-Plated Steel Cover | No | 4 | 0.2" | 1.938" | 00000000 | 00000 |
| 7 | 1/4"-20 | __ | 24 | 0.01" | 1.125" | 2.313" | 2.375" | 2.375" | Durometer 50A | -20° to 180° | Zinc-Plated Steel Cover | No | 4 | 0.2" | 1.938" | 00000000 | 00000 |
| 7 | 1/4"-20 | __ | 60 | 0.01" | 1.125" | 2.313" | 2.375" | 2.375" | Durometer 68A | -20° to 180° | Zinc-Plated Steel Cover | No | 4 | 0.2" | 1.938" | 00000000 | 00000 |
| 7 | 3/8"-16 | __ | 50 | 0.01" | 1.5" | 3" | 3" | 3" | Durometer 44A | -20° to 180° | Zinc-Plated Steel Cover | No | 4 | 0.27" | 2.5" | 00000000 | 00000 |
| 7 | 3/8"-16 | __ | 110 | 0.01" | 1.5" | 3" | 3" | 3" | Durometer 70A | -20° to 180° | Zinc-Plated Steel Cover | No | 4 | 0.27" | 2.5" | 00000000 | 00000 |
Fail-Safe Bolt-Down Vibration-Damping Mounts with Threaded Hole
An interlocking steel frame in these mounts prevents collapse, even if the rubber fails. They minimize vibration and noise from machinery to reduce maintenance costs, prolong equipment life, and protect floors. Use the holes in the base to bolt down these mounts to keep your equipment stationary. Neoprene rubber has good resistance to oil and gasoline.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Pitch, mm | Capacity per Mount, lbs. | Deflection @ Capacity | O'all Ht. | Dia. | Base Lg. | Base Wd. | Hardness | Temp. Range, °F | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Each | |
Neoprene Rubber with Steel Base | |||||||||||||||
| 1/4"-20 | __ | 46 | 0.05" | 0.75" | 0.92" | 2.27" | 1.25" | Durometer 30A | 10° to 180° | No | 2 | 0.26" | 1.75" | 000000000 | 00000 |
| 1/4"-20 | __ | 87 | 0.05" | 0.75" | 0.92" | 2.27" | 1.25" | Durometer 40A | 10° to 180° | No | 2 | 0.26" | 1.75" | 000000000 | 0000 |
| 1/4"-20 | __ | 115 | 0.05" | 0.75" | 0.92" | 2.27" | 1.25" | Durometer 50A | 10° to 180° | No | 2 | 0.26" | 1.75" | 000000000 | 0000 |
| 1/4"-20 | __ | 137 | 0.05" | 0.75" | 0.92" | 2.27" | 1.25" | Durometer 60A | 10° to 180° | No | 2 | 0.26" | 1.75" | 000000000 | 0000 |
| 5/16"-18 | __ | 85 | 0.08" | 1.02" | 1.2" | 3.13" | 1.73" | Durometer 30A | 10° to 180° | No | 2 | 0.34" | 2.38" | 000000000 | 0000 |
| 5/16"-18 | __ | 170 | 0.08" | 1.02" | 1.2" | 3.13" | 1.73" | Durometer 40A | 10° to 180° | No | 2 | 0.34" | 2.38" | 000000000 | 0000 |
| 5/16"-18 | __ | 250 | 0.08" | 1.02" | 1.2" | 3.13" | 1.73" | Durometer 50A | 10° to 180° | No | 2 | 0.34" | 2.38" | 000000000 | 0000 |
| 5/16"-18 | __ | 340 | 0.08" | 1.02" | 1.2" | 3.13" | 1.73" | Durometer 60A | 10° to 180° | No | 2 | 0.34" | 2.38" | 000000000 | 0000 |
| 3/8"-16 | __ | 210 | 0.1" | 1.12" | 1.78" | 3.75" | 2.27" | Durometer 30A | 10° to 180° | No | 2 | 0.34" | 3" | 000000000 | 0000 |
| 3/8"-16 | __ | 210 | 0.1" | 1.25" | 1.86" | 3.81" | 2.32" | Durometer 30A | 10° to 180° | No | 2 | 0.34" | 3" | 0000000 | 0000 |
| 3/8"-16 | __ | 360 | 0.1" | 1.25" | 1.86" | 3.81" | 2.32" | Durometer 40A | 10° to 180° | No | 2 | 0.34" | 3" | 00000000 | 0000 |
| 3/8"-16 | __ | 370 | 0.1" | 1.12" | 1.78" | 3.75" | 2.27" | Durometer 40A | 10° to 180° | No | 2 | 0.34" | 3" | 000000000 | 0000 |
| 3/8"-16 | __ | 520 | 0.1" | 1.12" | 1.78" | 3.75" | 2.27" | Durometer 50A | 10° to 180° | No | 2 | 0.34" | 3" | 000000000 | 0000 |
| 3/8"-16 | __ | 520 | 0.1" | 1.25" | 1.86" | 3.81" | 2.32" | Durometer 50A | 10° to 180° | No | 2 | 0.34" | 3" | 00000000 | 0000 |
| 3/8"-16 | __ | 680 | 0.1" | 1.12" | 1.78" | 3.75" | 2.27" | Durometer 60A | 10° to 180° | No | 2 | 0.34" | 3" | 000000000 | 0000 |
| 3/8"-16 | __ | 680 | 0.1" | 1.25" | 1.86" | 3.81" | 2.32" | Durometer 60A | 10° to 180° | No | 2 | 0.34" | 3" | 00000000 | 0000 |
| 3/8"-16 | __ | 750 | 0.08" | 1.12" | 1.78" | 3.75" | 2.27" | Durometer 70A | 10° to 180° | No | 2 | 0.34" | 3" | 000000000 | 0000 |
| 1/2"-13 | __ | 471 | 0.13" | 1.78" | 2.42" | 5.5" | 3.37" | Durometer 30A | 10° to 180° | No | 2 | 0.51" | 4.12" | 000000000 | 00000 |
| 1/2"-13 | __ | 713 | 0.13" | 1.78" | 2.42" | 5.5" | 3.37" | Durometer 40A | 10° to 180° | No | 2 | 0.51" | 4.12" | 000000000 | 00000 |
| 1/2"-13 | __ | 940 | 0.13" | 1.78" | 2.42" | 5.5" | 3.37" | Durometer 50A | 10° to 180° | No | 2 | 0.51" | 4.12" | 000000000 | 00000 |
| 1/2"-13 | __ | 1,064 | 0.13" | 1.78" | 2.42" | 5.5" | 3.37" | Durometer 60A | 10° to 180° | No | 2 | 0.51" | 4.12" | 000000000 | 00000 |
| 3/4"-10 | __ | 900 | 0.13" | 1.84" | 3.1" | 6.41" | 4.09" | Durometer 30A | 10° to 180° | No | 2 | 0.53" | 5" | 000000000 | 00000 |
| 3/4"-10 | __ | 1,106 | 0.13" | 1.84" | 3.1" | 6.41" | 4.09" | Durometer 40A | 10° to 180° | No | 2 | 0.53" | 5" | 000000000 | 00000 |
| 3/4"-10 | __ | 1,630 | 0.13" | 1.84" | 3.1" | 6.41" | 4.09" | Durometer 50A | 10° to 180° | No | 2 | 0.53" | 5" | 000000000 | 00000 |
| 3/4"-10 | __ | 2,270 | 0.17" | 2.25" | 4.12" | 7.41" | 5.1" | Durometer 30A | 10° to 180° | No | 2 | 0.63" | 6" | 000000000 | 00000 |
| 3/4"-10 | __ | 2,500 | 0.13" | 1.84" | 3.1" | 6.41" | 4.09" | Durometer 60A | 10° to 180° | No | 2 | 0.53" | 5" | 000000000 | 00000 |
| 3/4"-10 | __ | 3,520 | 0.17" | 2.25" | 4.12" | 7.41" | 5.1" | Durometer 40A | 10° to 180° | No | 2 | 0.63" | 6" | 000000000 | 00000 |
| 3/4"-10 | __ | 4,124 | 0.17" | 2.25" | 4.12" | 7.41" | 5.1" | Durometer 50A | 10° to 180° | No | 2 | 0.63" | 6" | 000000000 | 00000 |
| 3/4"-10 | __ | 6,600 | 0.17" | 2.25" | 4.12" | 7.41" | 5.1" | Durometer 60A | 10° to 180° | No | 2 | 0.63" | 6" | 000000000 | 00000 |
| M6 | 1 | 46 | 0.05" | 0.75" | 0.92" | 2.27" | 1.25" | Durometer 30A | 10° to 180° | No | 2 | 0.26" | 1.75" | 000000000 | 0000 |
| M6 | 1 | 87 | 0.05" | 0.75" | 0.92" | 2.27" | 1.25" | Durometer 40A | 10° to 180° | No | 2 | 0.26" | 1.75" | 000000000 | 0000 |
| M6 | 1 | 115 | 0.05" | 0.75" | 0.92" | 2.27" | 1.25" | Durometer 50A | 10° to 180° | No | 2 | 0.26" | 1.75" | 000000000 | 0000 |
| M6 | 1 | 137 | 0.05" | 0.75" | 0.92" | 2.27" | 1.25" | Durometer 60A | 10° to 180° | No | 2 | 0.26" | 1.75" | 000000000 | 0000 |
| M8 | 1.25 | 85 | 0.08" | 1.02" | 1.2" | 3.13" | 1.73" | Durometer 30A | 10° to 180° | No | 2 | 0.34" | 2.38" | 000000000 | 0000 |
| M8 | 1.25 | 170 | 0.08" | 1.02" | 1.2" | 3.13" | 1.73" | Durometer 40A | 10° to 180° | No | 2 | 0.34" | 2.38" | 000000000 | 0000 |
| M8 | 1.25 | 210 | 0.1" | 1.25" | 1.86" | 3.81" | 2.32" | Durometer 30A | 10° to 180° | No | 2 | 0.34" | 3" | 000000000 | 0000 |
| M8 | 1.25 | 250 | 0.08" | 1.02" | 1.2" | 3.13" | 1.73" | Durometer 50A | 10° to 180° | No | 2 | 0.34" | 2.38" | 000000000 | 0000 |
| M8 | 1.25 | 340 | 0.08" | 1.02" | 1.2" | 3.13" | 1.73" | Durometer 60A | 10° to 180° | No | 2 | 0.34" | 2.38" | 000000000 | 0000 |
| M8 | 1.25 | 360 | 0.1" | 1.25" | 1.86" | 3.81" | 2.32" | Durometer 40A | 10° to 180° | No | 2 | 0.34" | 3" | 000000000 | 0000 |
| M8 | 1.25 | 520 | 0.1" | 1.25" | 1.86" | 3.81" | 2.32" | Durometer 50A | 10° to 180° | No | 2 | 0.34" | 3" | 000000000 | 0000 |
| M8 | 1.25 | 680 | 0.1" | 1.25" | 1.86" | 3.81" | 2.32" | Durometer 60A | 10° to 180° | No | 2 | 0.34" | 3" | 000000000 | 0000 |
| M12 | 1.75 | 470 | 0.13" | 1.78" | 2.42" | 5.5" | 3.37" | Durometer 30A | 10° to 180° | No | 2 | 0.51" | 4.12" | 000000000 | 00000 |
| M12 | 1.75 | 715 | 0.13" | 1.78" | 2.42" | 5.5" | 3.37" | Durometer 40A | 10° to 180° | No | 2 | 0.51" | 4.12" | 000000000 | 00000 |
| M12 | 1.75 | 940 | 0.13" | 1.78" | 2.42" | 5.5" | 3.37" | Durometer 50A | 10° to 180° | No | 2 | 0.51" | 4.12" | 000000000 | 00000 |
| M12 | 1.75 | 1,064 | 0.13" | 1.78" | 2.42" | 5.5" | 3.37" | Durometer 60A | 10° to 180° | No | 2 | 0.51" | 4.12" | 000000000 | 00000 |
| M20 | 2.5 | 900 | 0.13" | 1.84" | 3.1" | 6.41" | 4.09" | Durometer 30A | 10° to 180° | No | 2 | 0.53" | 5" | 000000000 | 00000 |
| M20 | 2.5 | 1,106 | 0.13" | 1.84" | 3.1" | 6.41" | 4.09" | Durometer 40A | 10° to 180° | No | 2 | 0.53" | 5" | 000000000 | 00000 |
| M20 | 2.5 | 1,630 | 0.13" | 1.84" | 3.1" | 6.41" | 4.09" | Durometer 50A | 10° to 180° | No | 2 | 0.53" | 5" | 000000000 | 00000 |
| M20 | 2.5 | 2,500 | 0.13" | 1.84" | 3.1" | 6.41" | 4.09" | Durometer 60A | 10° to 180° | No | 2 | 0.53" | 5" | 000000000 | 00000 |
Extreme-Force Bolt-Down Vibration-Damping Mounts with Threaded Hole
Spring action provides significant isolation of vibration and noise. These mounts are great for high-impact applications such as punch presses and hammers and machines operating as slowly as 500 rpm. A rubber pad is bonded to the base to limit movement. Use the holes in the base to bolt down these mounts to keep your equipment stationary. Mounts are for use in compression load applications. An adjustment bolt with locking nut lets you use mounts for leveling. For best results, adjust the leveling bolt so the plate is 1/4"- 1/2" above the top of the base.
Mounts with 2 or 4 springs meet ANSI/ASHRAE 171 seismic testing standards for resistance to wind and seismic loads. They provide isolation of vibration in all directions during earthquakes.
For technical drawings and 3-D models, click on a part number.
Mounts | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting Holes | Replacement Springs | ||||||||||||||
| Thread Size | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | O'all Ht. | Base Lg. | Base Wd. | Temp. Range, °F | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. | Specifications Met | Each | Each | ||
Steel with Iron Base and Plate and Zinc-Plated Steel Stud | |||||||||||||||
Number of Springs—1 | |||||||||||||||
| 3/8"-16 | 3" | 50 | 1" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | __ | 0000000 | 000000 | 0000000 | 00000 |
| 3/8"-16 | 3" | 100 | 1" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | __ | 0000000 | 00000 | 0000000 | 0000 |
| 3/8"-16 | 3" | 150 | 1" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | __ | 0000000 | 00000 | 0000000 | 0000 |
| 3/8"-16 | 3" | 250 | 0.83" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | __ | 0000000 | 00000 | 0000000 | 0000 |
| 3/8"-16 | 3" | 370 | 0.75" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | __ | 0000000 | 00000 | 0000000 | 0000 |
| 3/8"-16 | 3" | 520 | 0.75" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | __ | 0000000 | 00000 | 0000000 | 00000 |
| 1/2"-13 | 3 1/2" | 675 | 1.32" | 5.25" | 7.75" | 3" | -20° to 180° | No | 0.625" | 6.5" | __ | 0000000 | 00000 | 0000000 | 00000 |
| 1/2"-13 | 3 1/2" | 900 | 1.02" | 5.25" | 7.75" | 3" | -20° to 180° | No | 0.625" | 6.5" | __ | 0000000 | 00000 | 0000000 | 00000 |
| 1/2"-13 | 3 1/2" | 1,200 | 0.9" | 5.25" | 7.75" | 3" | -20° to 180° | No | 0.625" | 6.5" | __ | 0000000 | 00000 | 0000000 | 00000 |
| 1/2"-13 | 3 1/2" | 1,785 | 0.88" | 5.25" | 7.75" | 3" | -20° to 180° | No | 0.625" | 6.5" | __ | 0000000 | 00000 | 0000000 | 00000 |
Steel with Steel Base and Plate and Zinc-Plated Steel Stud | |||||||||||||||
Number of Springs—2 | |||||||||||||||
| 3/4"-16 | 5" | 280 | 1.5" | 7" | 12" | 8" | -20° to 155° | No | 0.688" | 10.25" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 3/4"-16 | 5" | 500 | 1.5" | 7" | 12" | 8" | -20° to 155° | No | 0.688" | 10.25" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 3/4"-16 | 5" | 770 | 1.5" | 7" | 12" | 8" | -20° to 155° | No | 0.688" | 10.25" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 3/4"-16 | 5" | 1,260 | 1.5" | 7" | 12" | 8" | -20° to 155° | No | 0.688" | 10.25" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 3/4"-16 | 5" | 1,530 | 1.5" | 7" | 12" | 8" | -20° to 155° | No | 0.688" | 10.25" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 3/4"-16 | 5" | 1,710 | 1.5" | 7" | 12" | 8" | -20° to 155° | No | 0.688" | 10.25" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 3/4"-16 | 5" | 1,860 | 1.5" | 7" | 12" | 8" | -20° to 155° | No | 0.688" | 10.25" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 3/4"-16 | 5" | 2,060 | 1.5" | 7" | 12" | 8" | -20° to 155° | No | 0.688" | 10.25" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 3/4"-16 | 5" | 2,960 | 1.5" | 7" | 12" | 8" | -20° to 155° | No | 0.688" | 10.25" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 3/4"-16 | 5" | 4,260 | 1.5" | 7" | 12" | 8" | -20° to 155° | No | 0.688" | 10.25" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
Number of Springs—4 | |||||||||||||||
| 1-14 | 6" | 560 | 1.5" | 7.5" | 17" | 8" | -20° to 155° | No | 0.813" | 15.125" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 1-14 | 6" | 1,000 | 1.5" | 7.5" | 17" | 8" | -20° to 155° | No | 0.813" | 15.125" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 1-14 | 6" | 1,540 | 1.5" | 7.5" | 17" | 8" | -20° to 155° | No | 0.813" | 15.125" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 1-14 | 6" | 2,520 | 1.5" | 7.5" | 17" | 8" | -20° to 155° | No | 0.813" | 15.125" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 1-14 | 6" | 3,060 | 1.5" | 7.5" | 17" | 8" | -20° to 155° | No | 0.813" | 15.125" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 1-14 | 6" | 3,420 | 1.5" | 7.5" | 17" | 8" | -20° to 155° | No | 0.813" | 15.125" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 1-14 | 6" | 3,720 | 1.5" | 7.5" | 17" | 8" | -20° to 155° | No | 0.813" | 15.125" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 1-14 | 6" | 4,120 | 1.5" | 7.5" | 17" | 8" | -20° to 155° | No | 0.813" | 15.125" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 1-14 | 6" | 5,920 | 1.5" | 7.5" | 17" | 8" | -20° to 155° | No | 0.813" | 15.125" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 1-14 | 6" | 8,520 | 1.5" | 7.5" | 17" | 8" | -20° to 155° | No | 0.813" | 15.125" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
Adjustable Extreme-Force Bolt-Down Vibration-Damping Mounts with Threaded Hole
Connect these mounts to your air supply for vibration and shock isolation in compression load applications. They handle the high impact of equipment such as punch presses, blowers, forging hammers, shakers, vibrators, and air compressors. Use the holes in the base to bolt down these mounts to keep your equipment stationary. Neoprene rubber has good resistance to oil and gasoline. You can add or release air for leveling (±1/4" adjustment).
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Capacity per Mount, lbs. | Deflection @ Capacity | O'all Ht. | Dia. | Ht. | Base Lg. | Base Wd. | Hardness | Max. Pressure, psi | Temperature Range, °F | Features | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Each | |
Neoprene Rubber with Aluminum Base and Aluminum Plate | |||||||||||||||||
| 3/8"-16 | 100 | 1" | 2.5" | 2.88" | 2" | 3" | 3" | Durometer 60A | 60 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 2.38" | 00000000 | 0000000 |
| 1/2"-13 | 300 | 1" | 2.45" | 4.14" | 1.91" | 4.19" | 4.19" | Durometer 60A | 60 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 3.5" | 00000000 | 000000 |
| 1/2"-13 | 600 | 1.5" | 3.5" | 5" | 2.94" | 5.12" | 5.12" | Durometer 60A | 80 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 4.25" | 00000000 | 000000 |
| M10 | 100 | 0.5" | 2.5" | 2.89" | 1.94" | 3" | 3" | Durometer 65A | 85 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 2.38" | 00000000 | 00000 |
| M12 | 300 | 0.5" | 2.5" | 4.14" | 1.94" | 4.19" | 4.19" | Durometer 65A | 85 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 3.5" | 00000000 | 00000 |
| M12 | 550 | 0.5" | 3.5" | 5" | 2.94" | 5.13" | 5.13" | Durometer 65A | 85 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 4.25" | 00000000 | 000000 |
| M12 | 1,200 | 0.5" | 3.5" | 6.74" | 2.94" | 6.88" | 6.88" | Durometer 65A | 85 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 6" | 00000000 | 000000 |
| M16 | 2,400 | 0.5" | 3.5" | 9.66" | 2.94" | 10" | 10" | Durometer 65A | 85 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.56" | 8.5" | 00000000 | 000000 |
Neoprene Rubber with Aluminum Base and Steel Plate | |||||||||||||||||
| 1/2"-13 | 1,200 | 1.5" | 3.5" | 6.74" | 2.94" | 6.88" | 6.88" | Durometer 60A | 80 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 6" | 00000000 | 000000 |
| 5/8"-11 | 2,400 | 1.5" | 3.5" | 9.66" | 2.94" | 10" | 10" | Durometer 60A | 80 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.56" | 8.5" | 00000000 | 000000 |
| 5/8"-11 | 4,800 | 1.5" | 3.5" | 13.31" | 2.94" | 13.5" | 13.5" | Durometer 60A | 80 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.56" | 12" | 00000000 | 000000 |
Seismic Bolt-Down Vibration-Damping Mounts with Threaded Hole
Limit damage during moderate earthquakes. These mounts have a seismic rating of 1g (acceleration of gravity) and dissipate vibration and noise in compression and shear load applications. Use the holes in the base to bolt down these mounts to keep your equipment stationary. Neoprene rubber has good resistance to oil and gasoline. Mounts come with a bolt and washer for height adjustment.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | Shear Capacity per Mount, lbs. | Deflection @ Shear Capacity | O'all Ht. | Dia. | Base Lg. | Base Wd. | Hardness | Temperature Range, °F | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. | Each | |
Neoprene Rubber with Steel Base and Cadmium-Plated Steel Bolt | ||||||||||||||||
| 1/2"-13 | 1 1/4" | 250 | 0.15" | 200 | 0.09" | 1.875" | 2.75" | 4.75" | 3" | Durometer 30A | -20° to 225° | No | 0.438" | 3.875", 2" | 0000000 | 000000 |
| 1/2"-13 | 1 1/4" | 525 | 0.15" | 420 | 0.09" | 1.875" | 2.75" | 4.75" | 3" | Durometer 45A | -20° to 225° | No | 0.438" | 3.875", 2" | 0000000 | 00000 |
| 1/2"-13 | 1 1/4" | 1,000 | 0.15" | 800 | 0.09" | 1.875" | 2.75" | 4.75" | 3" | Durometer 60A | -20° to 225° | No | 0.438" | 3.875", 2" | 0000000 | 00000 |
| 5/8"-11 | 1 1/4" | 1,400 | 0.15" | 400 | 0.09" | 1.875" | 3.5" | 6.25" | 3.75" | Durometer 40A | -20° to 225° | No | 0.563" | 5", 2.5" | 0000000 | 00000 |
| 5/8"-11 | 1 1/4" | 2,100 | 0.15" | 600 | 0.09" | 1.875" | 3.5" | 6.25" | 3.75" | Durometer 50A | -20° to 225° | No | 0.563" | 5", 2.5" | 0000000 | 00000 |
| 5/8"-11 | 1 1/4" | 3,500 | 0.15" | 1,000 | 0.09" | 1.875" | 3.5" | 6.25" | 3.75" | Durometer 60A | -20° to 225° | No | 0.563" | 5", 2.5" | 0000000 | 00000 |
Fail-Safe Bolt-Down Vibration-Damping Mounts with Unthreaded Hole
An interlocking steel frame in these mounts prevents collapse, even if the rubber fails. They minimize vibration and noise from machinery to reduce maintenance costs, prolong equipment life, and protect floors. Use the holes in the base to bolt down these mounts to keep your equipment stationary. Neoprene rubber has good resistance to oil and gasoline. Use these mounts in compression load applications with rotating equipment such as fans, blowers, pumps, compressors, and generators.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity per Mount, lbs. | O'all Ht. | Dia. | Hole Dia. | Base Lg. | Base Wd. | Deflection @ Capacity | Hardness | Temperature Range, °F | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Each | |
Neoprene Rubber with Steel Base | ||||||||||||||
| 375 | 1.66" | 3.25" | 0.5" | 5.38" | 3.25" | 0.13" | Durometer 40A | 10° to 180° | No | 2 | 0.53" | 4.12" | 00000000 | 000000 |
| 525 | 1.66" | 3.94" | 0.625" | 6.25" | 3.94" | 0.13" | Durometer 40A | 10° to 180° | No | 2 | 0.53" | 5" | 00000000 | 00000 |
| 525 | 1.66" | 3.94" | 0.75" | 6.25" | 3.94" | 0.13" | Durometer 40A | 10° to 180° | No | 2 | 0.53" | 5" | 00000000 | 00000 |
| 800 | 1.66" | 3.25" | 0.5" | 5.38" | 3.25" | 0.13" | Durometer 50A | 10° to 180° | No | 2 | 0.53" | 4.12" | 00000000 | 00000 |
| 925 | 1.66" | 3.25" | 0.5" | 5.38" | 3.25" | 0.13" | Durometer 60A | 10° to 180° | No | 2 | 0.53" | 4.12" | 00000000 | 00000 |
| 1,000 | 1.66" | 3.94" | 0.625" | 6.25" | 3.94" | 0.13" | Durometer 50A | 10° to 180° | No | 2 | 0.53" | 5" | 00000000 | 00000 |
| 1,000 | 1.66" | 3.94" | 0.75" | 6.25" | 3.94" | 0.13" | Durometer 50A | 10° to 180° | No | 2 | 0.53" | 5" | 00000000 | 00000 |
| 1,250 | 1.66" | 3.94" | 0.625" | 6.25" | 3.94" | 0.13" | Durometer 60A | 10° to 180° | No | 2 | 0.53" | 5" | 00000000 | 00000 |
| 1,250 | 1.66" | 3.94" | 0.75" | 6.25" | 3.94" | 0.13" | Durometer 60A | 10° to 180° | No | 2 | 0.53" | 5" | 00000000 | 00000 |
| 1,425 | 1.66" | 3.25" | 0.5" | 5.38" | 3.25" | 0.13" | Durometer 70A | 10° to 180° | No | 2 | 0.53" | 4.12" | 00000000 | 00000 |
| 1,950 | 1.66" | 3.94" | 0.625" | 6.25" | 3.94" | 0.13" | Durometer 70A | 10° to 180° | No | 2 | 0.53" | 5" | 00000000 | 00000 |
| 1,950 | 1.66" | 3.94" | 0.75" | 6.25" | 3.94" | 0.13" | Durometer 70A | 10° to 180° | No | 2 | 0.53" | 5" | 00000000 | 00000 |
Sanitary Swivel Vibration-Damping Leveling Mounts with Threaded Stud
One Mounting Hole
Two Mounting Holes
Thread these mounts into machinery to level them on uneven floors in sanitary environments such as food-processing areas. They also create space to clean underneath machinery. All have a hygienic thread cover that prevents contaminants from settling in the grooves. To further block out contaminants as the mount moves, as well as prevent unsanitary metal-to-metal connections, there is a silicone seal at each end of the thread cover and at the point where the mount swivels. These seals have chemical additives, so you can find them with an X-ray machine if a piece falls into your line. This helps you comply with Hazard Analysis and Critical Control Point (HACCP) programs to keep contaminated food from leaving your facility. Seals are also FDA compliant for direct contact with food.
Made of 304 stainless steel, these mounts won’t corrode from frequent washdowns with harsh cleaners and sanitizers. Their smooth finish and rounded edges leave no crevices for bacteria to grow in, reducing the chance of foodborne illnesses. They also don’t have any horizontal ledges, so liquids and food will drain off completely. Certified by 3-A, EHEDG, and USDA, they meet sanitary design standards.
The rubber cushion on the bottom reduces vibration and noise from machinery, which protects floors and extends machine life. Their grip on the floor minimizes bacteria growth beneath them and prevents machines from shifting.
These mounts swivel to level machinery on slightly uneven floors; for severely uneven floors, use the threaded stud to raise each mount to a level height.
Some mounts have mounting holes to secure them to the floor, keeping machinery stationary. Mounts with one mounting hole are secure enough to prevent machines from moving while they’re running and being cleaned. Mounts with two mounting holes reduce vibration by anchoring machinery to the floor on both sides.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Mounting Ht. | Cap. per Mount, lbs. | Deflection @ Cap. | Swivel Range of Motion | Base Dia. | Overall Ht. | Temp. Range, °F | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. Lg. | Performance Properties | Specifications Met | Each | |
304 Stainless Steel with Rubber Cushion—One Mounting Hole | ||||||||||||||
| 5/8"-11 | 4 5/16"-5 11/16" | 3,300 | Not Rated | 10° | 3 1/8" | 7 3/16" | -30° to 230° | No | 19/32" | __ | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Certified | 0000000 | 000000 |
| 5/8"-11 | 4 5/16"-5 11/16" | 4,900 | Not Rated | 10° | 4 1/8" | 7 3/16" | -30° to 230° | No | 19/32" | __ | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Certified | 0000000 | 000000 |
| 5/8"-11 | 5 1/2"-8 1/16" | 3,300 | Not Rated | 10° | 3 1/8" | 9 9/16" | -30° to 230° | No | 19/32" | __ | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Certified | 0000000 | 00000 |
| 5/8"-11 | 5 1/2"-8 1/16" | 4,900 | Not Rated | 10° | 4 1/8" | 9 9/16" | -30° to 230° | No | 19/32" | __ | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Certified | 0000000 | 000000 |
| 3/4"-10 | 4 5/16"-5 11/16" | 3,300 | Not Rated | 10° | 3 1/8" | 7 3/16" | -30° to 230° | No | 19/32" | __ | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Certified | 0000000 | 00000 |
| 3/4"-10 | 4 5/16"-5 11/16" | 4,900 | Not Rated | 10° | 4 1/8" | 7 3/16" | -30° to 230° | No | 19/32" | __ | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Certified | 0000000 | 000000 |
| 3/4"-10 | 5 1/2"-8 1/16" | 3,300 | Not Rated | 10° | 3 1/8" | 9 9/16" | -30° to 230° | No | 19/32" | __ | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Certified | 0000000 | 00000 |
| 3/4"-10 | 5 1/2"-8 1/16" | 4,900 | Not Rated | 10° | 4 1/8" | 9 9/16" | -30° to 230° | No | 19/32" | __ | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Certified | 0000000 | 000000 |
| M16 | 4 1/8"-5 1/2" | 2,000 | Not Rated | 10° | 2 9/16" | 7" | -30° to 230° | No | 19/32" | __ | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Certified | 0000000 | 00000 |
| M20 | 4 5/16"-5 11/16" | 3,300 | Not Rated | 10° | 3 1/8" | 7 3/16" | -30° to 230° | No | 19/32" | __ | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Certified | 0000000 | 000000 |
304 Stainless Steel with Rubber Cushion—Two Mounting Holes | ||||||||||||||
| 5/8"-11 | 4"-5 3/8" | 6,800 | Not Rated | 9° | 3 1/8" | 6 7/8" | -30° to 230° | No | 11/32" | 2 1/4" | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Certified | 0000000 | 000000 |
| 5/8"-11 | 5 3/16"-7 3/4" | 5,400 | Not Rated | 9° | 3 1/8" | 9 1/4" | -30° to 230° | No | 11/32" | 2 1/4" | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Certified | 0000000 | 000000 |
| 3/4"-10 | 4"-5 3/8" | 9,800 | Not Rated | 9° | 4 1/16" | 6 7/8" | -30° to 230° | No | 1/2" | 3 1/8" | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Certified | 0000000 | 000000 |
| 3/4"-10 | 5 3/16"-7 3/4" | 9,800 | Not Rated | 9° | 4 1/16" | 9 1/4" | -30° to 230° | No | 1/2" | 3 1/8" | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Certified | 0000000 | 000000 |
| 1"-8 | 4"-5 3/8" | 17,400 | Not Rated | 9° | 4 1/16" | 6 7/8" | -30° to 230° | No | 1/2" | 3 1/8" | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Certified | 0000000 | 000000 |
| 1"-8 | 5 3/16"-7 3/4" | 17,400 | Not Rated | 9° | 4 1/16" | 9 1/4" | -30° to 230° | No | 1/2" | 3 1/8" | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Certified | 0000000 | 000000 |
| M16 | 4"-5 3/8" | 6,900 | Not Rated | 9° | 4 1/16" | 6 7/8" | -30° to 230° | No | 1/2" | 3 1/8" | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Certified | 0000000 | 000000 |
| M16 | 5 3/16"-7 3/4" | 5,500 | Not Rated | 9° | 4 1/16" | 9 1/4" | -30° to 230° | No | 1/2" | 3 1/8" | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Certified | 0000000 | 000000 |
| M20 | 4"-5 3/8" | 10,800 | Not Rated | 9° | 4 1/16" | 6 7/8" | -30° to 230° | No | 1/2" | 3 1/8" | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Certified | 0000000 | 000000 |
| M20 | 5 3/16"-7 3/4" | 10,800 | Not Rated | 9° | 4 1/16" | 9 1/4" | -30° to 230° | No | 1/2" | 3 1/8" | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Certified | 0000000 | 000000 |
Seismic Swivel Leveling Mounts
Adjust the swivels on these mounts to level equipment on uneven surfaces for protection during earthquakes. All meet NZS 4219, a New Zealand standard for seismic-rated components. Use the threaded stud to raise equipment for cleaning and inspection, and the mounting holes to bolt equipment down and keep it in place. A rubber cushion helps reduce vibration to cut down on noise, protect floors, and extend machine life. Made of 304 stainless steel, these leveling mounts won’t corrode from frequent washdowns and harsh cleaners.
For technical drawings and 3-D models, click on a part number.
Capacity per Mount, lbs. | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Pitch, mm | Thread Length | Load | Pull | Base Diameter | Overall Height | Temperature Range, °F | Mounting Fasteners Included | Number of | Diameter | Center-to-Center Length | Specifications Met | Each | |
304 Stainless Steel with Rubber Cushion | ||||||||||||||
| M30 | 3.5 | 7 1/8" | 13,480 | 6,290 | 5 7/8" | 11 3/8" | 0° to 230° | No | 3 | 17/32" | 4 3/32" | NZS 4219 | 00000000 | 0000000 |
| M30 | 3.5 | 7 1/8" | 13,480 | 8,540 | 7 7/8" | 11 3/8" | 0° to 230° | No | 4 | 5/8" | 4 15/32" | NZS 4219 | 00000000 | 000000 |
| M36 | 4 | 7 1/8" | 21,580 | 6,290 | 5 7/8" | 11 3/8" | 0° to 230° | No | 3 | 17/32" | 4 3/32" | NZS 4219 | 00000000 | 000000 |
| M36 | 4 | 7 1/8" | 21,580 | 8,540 | 7 7/8" | 11 3/8" | 0° to 230° | No | 4 | 5/8" | 4 15/32" | NZS 4219 | 00000000 | 000000 |
| M42 | 4.5 | 7 5/16" | 31,470 | 6,290 | 5 7/8" | 11 3/4" | 0° to 230° | No | 3 | 17/32" | 4 3/32" | NZS 4219 | 00000000 | 000000 |
| M42 | 4.5 | 7 5/16" | 31,470 | 8,540 | 7 7/8" | 11 3/4" | 0° to 230° | No | 4 | 5/8" | 4 15/32" | NZS 4219 | 00000000 | 000000 |
| M48 | 5 | 9 1/8" | 31,470 | 6,290 | 5 7/8" | 13 1/2" | 0° to 230° | No | 3 | 17/32" | 4 3/32" | NZS 4219 | 00000000 | 000000 |
| M48 | 5 | 9 1/8" | 31,470 | 8,540 | 7 7/8" | 13 1/2" | 0° to 230° | No | 4 | 5/8" | 4 15/32" | NZS 4219 | 00000000 | 00000000 |