About Cabinet Door and Drawer Locks
More
About Tapping Screws
More
Hinge Screws
Commonly used with door hinge hardware, these screws cut threads in soft material such as aluminum and brass. They're beveled under the head for use in countersunk holes. They are undercut to allow more threading. Screws cut threads in drilled holes as they’re turned, so they require less driving torque and cause less stress on your material than thread forming screws. Length is measured from the top of the head.
Brass, bronze, and chrome-plated steel screws have a bright and attractive finish. They're corrosion resistant in wet environments.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Thread Size  | Lg. | Dia. | Ht. | Drive Size | Drill Bit Size | Tapping Screw Type | For Use In | Pkg. Qty. | Pkg. | |
| Brass-Plated Steel | 12-24 | 1/2" | 0.412" | 0.092" | No. 3 | No. 8 | F | Aluminum, Brass, Sheet Metal | 10 | 000000000 | 00000 |
Screw-In Hooks
Threads on one end make it easy to screw these hooks directly into a wall.
For technical drawings and 3-D models, click on a part number.
Keyed Alike Deadbolt Drawer Locks
Choose these locks if you need several locks that open with the same key.
For technical drawings and 3-D models, click on a part number.
Locks | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Case | Mounting Holes | Replacement Keys | ||||||||||||||
| For Max. Thick. | Key Number | For Through Hole Dia. | Rear Projection | Latch Bolt Projection | Ht. | Wd. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Style | For Use On | Each | Each | ||
Brass-Plated Zinc—Dull | ||||||||||||||||
| 3/4" | EB018 | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 000000 | 00000000 | 00000 |
| 3/4" | EB079 | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 000000 | 00000 | 00000000 | 0000 |
| 3/4" | EB121 | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
| 3/4" | EB127 | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
| 7/8" | EB019 | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
| 7/8" | EB092 | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 000000 | 00000 | 00000000 | 0000 |
| 7/8" | EB123 | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
| 1 1/8" | EB020 | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
Pry-Resistant Keyed Alike Deadbolt Drawer Locks
With thicker bodies and longer bolts, these locks resist prying to provide more security than other keyed alike deadbolt drawer locks. Choose them if you need several locks that open with the same key.
For technical drawings and 3-D models, click on a part number.
Locks | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Case | Mounting Holes | Replacement Keys | ||||||||||||||
| For Max. Thick. | Key Number | For Through Hole Dia. | Rear Projection | Latch Bolt Projection | Ht. | Wd. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Style | For Use On | Each | Each | ||
Brass-Plated Zinc—Dull | ||||||||||||||||
| 7/8" | 107 | 15/16" | 1/2" | 3/4" | 1 1/4" | 1 5/8" | Yes | 4 | 5/32" | 1 5/16" | Straight | Wood | 00000000 | 000000 | 0000000 | 00000 |
| 7/8" | 915 | 15/16" | 1/2" | 3/4" | 1 1/4" | 1 5/8" | Yes | 4 | 5/32" | 1 5/16" | Straight | Wood | 0000000 | 00000 | 0000000 | 0000 |
| 1 1/8" | 101 | 15/16" | 1/2" | 3/4" | 1 1/4" | 1 5/8" | Yes | 4 | 5/32" | 1 5/16" | Straight | Wood | 00000000 | 00000 | 0000000 | 0000 |
Deadbolt Drawer Locks
Choose these locks if you need locks that each open with a different key.
For technical drawings and 3-D models, click on a part number.
Case | Mounting Holes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Thick. | For Through Hole Dia. | Rear Projection | Latch Bolt Projection | Ht. | Wd. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Style | For Use On | Each | |
Brass-Plated Zinc—Dull | |||||||||||||
| 3/4" | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 000000 | 000000 |
| 7/8" | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 000000 | 00000 |
| 1 1/8" | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 0000000 | 00000 |
Master Keyed Deadbolt Drawer Locks
Choose these locks if you need locks that each open with a different key and also open with a master key. Two keys are included; master keys are sold separately.
For technical drawings and 3-D models, click on a part number.
Locks | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Case | Mounting Holes | Master Keys | ||||||||||||||
| For Max. Thick. | Master Key Number | For Through Hole Dia. | Rear Projection | Latch Bolt Projection | Ht. | Wd. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Style | For Use On | Each | Each | ||
Brass-Plated Zinc—Dull | ||||||||||||||||
| 3/4" | Z001 | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 000000 | 000000 | 000000 | 00000 |
| 7/8" | Z011 | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 0000000 | 0000 |
| 1 1/8" | EZ005 | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 0000000 | 00000 | 000000 | 0000 |
Pry-Resistant Master Keyed Deadbolt Drawer Locks
To provide more security than other master keyed deadbolt drawer locks, these locks have thicker bodies and longer bolts to resist prying. Choose them if you need locks that each open with a different key and also open with a master key. Two keys are included; master keys are sold separately.
For technical drawings and 3-D models, click on a part number.
Locks | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Case | Mounting Holes | Master Keys | |||||||||||||||
| For Max. Thick. | Master Key Number | For Through Hole Dia. | Rear Projection | Latch Bolt Projection | Ht. | Wd. | Lock Cylinder Material | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Style | For Use On | Each | Each | ||
Brass-Plated Zinc—Dull | |||||||||||||||||
| 7/8" | D4299/GM1 | 15/16" | 1/2" | 3/4" | 1 1/4" | 1 5/8" | Brass | Yes | 4 | 5/32" | 1 5/16" | Straight | Wood | 00000000 | 000000 | 0000000 | 00000 |
Pry-Resistant Deadbolt Drawer Locks
Thicker bodies and longer bolts resist prying to provide more security than other deadbolt drawer locks. Choose these locks if you need locks that each open with a different key.
For technical drawings and 3-D models, click on a part number.
Case | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Thick. | For Through Hole Dia. | Rear Projection | Latch Bolt Projection | Ht. | Wd. | Lock Cylinder Material | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Style | For Use On | Each | |
Brass-Plated Zinc—Dull | ||||||||||||||
| 7/8" | 15/16" | 1/2" | 3/4" | 1 1/4" | 1 5/8" | Brass | Yes | 4 | 5/32" | 1 5/16" | Straight | Wood | 0000000 | 000000 |
| 1 1/8" | 15/16" | 1/2" | 3/4" | 1 1/4" | 1 5/8" | Brass | Yes | 4 | 5/32" | 1 5/16" | Straight | Wood | 0000000 | 00000 |
Keyed Alike Deadbolt Cabinet Door Locks
Choose these locks if you need several locks that open with the same key.
For technical drawings and 3-D models, click on a part number.
Locks | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Case | Mounting Holes | Replacement Keys | |||||||||||||||
| For Max. Thick. | Key Number | For Through Hole Dia. | Rear Projection | Latch Bolt Projection | Ht. | Wd. | Lock Cylinder Material | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Style | For Use On | Each | Each | ||
Brass-Plated Zinc—Dull | |||||||||||||||||
| 3/4" | EB018 | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 0000000 | 000000 | 00000000 | 00000 |
| 3/4" | EB079 | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
| 3/4" | EB121 | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
| 3/4" | EB127 | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
| 7/8" | EB019 | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 0000000 | 00000 | 00000000 | 0000 |
| 7/8" | EB092 | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
| 7/8" | EB123 | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
| 1 1/8" | EB020 | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 0000000 | 00000 | 00000000 | 0000 |
Pry-Resistant Keyed Alike Deadbolt Cabinet Door Locks
With thicker bodies and longer bolts, these locks resist prying to provide more security than other keyed alike deadbolt cabinet door locks. Choose them if you need several locks that open with the same key.
For technical drawings and 3-D models, click on a part number.
Locks | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Case | Mounting Holes | Replacement Keys | |||||||||||||||
| For Max. Thick. | Key Number | For Through Hole Dia. | Rear Projection | Latch Bolt Projection | Ht. | Wd. | Lock Cylinder Material | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Style | For Use On | Each | Each | ||
Brass-Plated Zinc—Dull | |||||||||||||||||
| 7/8" | 107 | 15/16" | 1/2" | 3/4" | 1 5/8" | 1 1/4" | Brass | Yes | 4 | 5/32" | 1 5/16" | Straight | Wood | 0000000 | 000000 | 0000000 | 00000 |
| 7/8" | 915 | 15/16" | 1/2" | 3/4" | 1 5/8" | 1 1/4" | Brass | Yes | 4 | 5/32" | 1 5/16" | Straight | Wood | 00000000 | 00000 | 0000000 | 0000 |
| 1 1/8" | 101 | 15/16" | 1/2" | 3/4" | 1 5/8" | 1 1/4" | Brass | Yes | 4 | 5/32" | 1 5/16" | Straight | Wood | 0000000 | 00000 | 0000000 | 0000 |
Pry-Resistant Deadbolt Cabinet Door Locks
Thicker bodies and longer bolts resist prying to provide more security than other deadbolt cabinet door locks. Choose these locks if you need locks that each open with a different key.
For technical drawings and 3-D models, click on a part number.
Case | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Thick. | For Through Hole Dia. | Rear Projection | Latch Bolt Projection | Ht. | Wd. | Lock Cylinder Material | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Style | For Use On | Each | |
Brass-Plated Zinc—Dull | ||||||||||||||
| 7/8" | 15/16" | 1/2" | 3/4" | 1 5/8" | 1 1/4" | Brass | Yes | 4 | 5/32" | 1 5/16" | Straight | Wood | 0000000 | 000000 |
| 1 1/8" | 15/16" | 1/2" | 3/4" | 1 5/8" | 1 1/4" | Brass | Yes | 4 | 5/32" | 1 5/16" | Straight | Wood | 0000000 | 00000 |
Deadbolt Cabinet Door Locks
Choose these locks if you need locks that each open with a different key.
For technical drawings and 3-D models, click on a part number.
Case | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Thick. | For Through Hole Dia. | Rear Projection | Latch Bolt Projection | Ht. | Wd. | Lock Cylinder Material | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Style | For Use On | Each | |
Brass-Plated Zinc—Dull | ||||||||||||||
| 3/4" | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 0000000 | 000000 |
| 7/8" | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 0000000 | 00000 |
| 1 1/8" | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 0000000 | 00000 |
Pry-Resistant Master Keyed Deadbolt Cabinet Door Locks
To provide more security than other master keyed deadbolt cabinet door locks, these locks have thicker bodies and longer bolts to resist prying. Choose them if you need locks that each open with a different key and also open with a master key. Two keys are included; master keys are sold separately.
For technical drawings and 3-D models, click on a part number.
Locks | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Case | Mounting Holes | Master Keys | |||||||||||||||
| For Max. Thick. | Master Key Number | For Through Hole Dia. | Rear Projection | Latch Bolt Projection | Ht. | Wd. | Lock Cylinder Material | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Style | For Use On | Each | Each | ||
Brass-Plated Zinc—Dull | |||||||||||||||||
| 7/8" | D4299/GM1 | 15/16" | 1/2" | 3/4" | 1 5/8" | 1 1/4" | Brass | Yes | 4 | 5/32" | 1 5/16" | Straight | Wood | 0000000 | 000000 | 0000000 | 00000 |
Master Keyed Deadbolt Cabinet Door Locks
Choose these locks if you need locks that each open with a different key and also open with a master key. Two keys are included; master keys are sold separately.
For technical drawings and 3-D models, click on a part number.
Locks | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Case | Mounting Holes | Master Keys | |||||||||||||||
| For Max. Thick. | Master Key Number | For Through Hole Dia. | Rear Projection | Latch Bolt Projection | Ht. | Wd. | Lock Cylinder Material | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Style | For Use On | Each | Each | ||
Brass-Plated Zinc—Dull | |||||||||||||||||
| 3/4" | Z001 | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 000000 | 000000 | 00000 |
| 7/8" | Z011 | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 0000000 | 0000 |
| 1 1/8" | EZ005 | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 000000 | 0000 |
Pry-Resistant Deadbolt Locks for Double Doors
Designed to withstand vandalism better than other deadbolt locks for double doors, these mortise mount into a cutout in the doors. All have a latch bolt to secure doors in the closed position.
For technical drawings and 3-D models, click on a part number.
Keyed Alike Keyed-on-Both-Sides Deadbolt Door Locks
Choose these locks if you need several locks that open with the same key. Lock and unlock the deadbolt from the inside as well as the outside with a key.
Select a lock with the correct backset distance (the distance from the door’s edge to the center of the lock's mounting hole) for your door. Latch bolt projection is the length the latch bolt extends from the door's edge.
| Finish | Material | For Door Thick. | Latch Bolt Projection | Inside Faceplate Dia. | Keying | For Door Swing Direction | Mounting Hardware Included | Number of Keys Included | Each | |
2 3/8" Backset Distance | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Polished Brass Plated | Brass | 1 3/8"-1 3/4" | 1" | 2 1/2" | Keyed Alike | Left, Right | Yes | 2 | 0000000 | 0000000 |
2 3/4" Backset Distance | ||||||||||
| Polished Brass Plated | Brass | 1 3/8"-1 3/4" | 1" | 2 1/2" | Keyed Alike | Left, Right | Yes | 2 | 0000000 | 000000 |
Pry-Resistant Keyed Alike Turnpiece- and Key-Locking Deadbolt Door Locks
A guard over the latch prevents tampering. Choose these locks if you need several locks that open with the same key. Lock and unlock the deadbolt with a turnpiece on the inside and a key on the outside.
Select a lock with the correct backset distance (the distance from the door’s edge to the center of the lock's mounting hole) for your door.
For technical drawings and 3-D models, click on a part number.
Inside Faceplate | 2 3/8" Backset Distance | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Finish | Material | For Door Thick. | Ht. | Wd. | Keying | For Door Swing Direction | Mounting Hardware Included | Number of Keys Included | Each | |
| Dull Brass Plated | Bronze | 1"-2 3/4" | 2 15/16" | 3 5/8" | Keyed Alike | Left, Right | Yes | 2 | 000000 | 0000000 |
Turnpiece- and Key-Locking Deadbolt Door Locks
Choose these locks if you need locks that each open with a different key. Lock and unlock the deadbolt with a turnpiece on the inside and a key on the outside.
Select a lock with the correct backset distance (the distance from the door’s edge to the center of the lock's mounting hole) for your door. Latch bolt projection is the length the latch bolt extends from the door's edge.
Inside Faceplate | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Finish | Material | For Door Thick. | Latch Bolt Projection | Dia. | Ht. | Wd. | Keying | For Door Swing Direction | Mounting Hardware Included | Number of Keys Included | Each | |
2 3/8" Backset Distance | ||||||||||||
| Dull Brass Plated | Zinc | 1 1/4"-2 1/4" | 1 1/8" | __ | 3 3/8" | 3 1/2" | Keyed Differently | Left, Right | Yes | 2 | 0000000 | 000000 |
| Polished Brass Plated | Brass | 1 3/8"-1 3/4" | 1" | 2 1/2" | __ | __ | Keyed Differently | Left, Right | Yes | 2 | 0000000 | 00000 |
2 3/4" Backset Distance | ||||||||||||
| Polished Brass Plated | Brass | 1 3/8"-1 3/4" | 1" | 2 1/2" | __ | __ | Keyed Differently | Left, Right | Yes | 2 | 0000000 | 00000 |
Pry-Resistant Turnpiece- and Key-Locking Deadbolt Door Locks
A guard over the latch prevents tampering. Choose these locks if you need locks that each open with a different key. Lock and unlock the deadbolt with a turnpiece on the inside and a key on the outside.
Select a lock with the correct backset distance (the distance from the door’s edge to the center of the lock's mounting hole) for your door.
For technical drawings and 3-D models, click on a part number.
Inside Faceplate | 2 3/8" Backset Distance | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Finish | Material | For Door Thick. | Ht. | Wd. | Keying | For Door Swing Direction | Mounting Hardware Included | Number of Keys Included | Each | |
| Dull Brass Plated | Bronze | 1"-2 3/4" | 2 15/16" | 3 5/8" | Keyed Differently | Left, Right | Yes | 2 | 000000 | 0000000 |
Keyed Alike Turnpiece- and Key-Locking Deadbolt Door Locks
Choose these locks if you need several locks that open with the same key. Lock and unlock the deadbolt with a turnpiece on the inside and a key on the outside.
Select a lock with the correct backset distance (the distance from the door’s edge to the center of the lock's mounting hole) for your door. Latch bolt projection is the length the latch bolt extends from the door's edge.
| Finish | Material | For Door Thick. | Latch Bolt Projection | Inside Faceplate Dia. | Keying | For Door Swing Direction | Mounting Hardware Included | Number of Keys Included | Each | |
2 3/8" Backset Distance | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Polished Brass Plated | Brass | 1 3/8"-1 3/4" | 1" | 2 1/2" | Keyed Alike | Left, Right | Yes | 2 | 0000000 | 000000 |
2 3/4" Backset Distance | ||||||||||
| Polished Brass Plated | Brass | 1 3/8"-1 3/4" | 1" | 2 1/2" | Keyed Alike | Left, Right | Yes | 2 | 0000000 | 00000 |
Keyed-on-Both-Sides Deadbolt Door Locks
Choose these locks if you need locks that each open with a different key. Lock and unlock the deadbolt from the inside as well as the outside with a key.
Select a lock with the correct backset distance (the distance from the door’s edge to the center of the lock's mounting hole) for your door. Latch bolt projection is the length the latch bolt extends from the door's edge.
Inside Faceplate | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Finish | Material | For Door Thick. | Latch Bolt Projection | Dia. | Ht. | Wd. | Keying | For Door Swing Direction | Mounting Hardware Included | Number of Keys Included | Each | |
2 3/8" Backset Distance | ||||||||||||
| Dull Brass Plated | Zinc | 1 1/4"-2 1/4" | 1 1/8" | __ | 3 3/8" | 3 1/2" | Keyed Differently | Left, Right | Yes | 2 | 0000000 | 000000 |
| Polished Brass Plated | Brass | 1 3/8"-1 3/4" | 1" | 2 1/2" | __ | __ | Keyed Differently | Left, Right | Yes | 2 | 0000000 | 000000 |
2 3/4" Backset Distance | ||||||||||||
| Polished Brass Plated | Brass | 1 3/8"-1 3/4" | 1" | 2 1/2" | __ | __ | Keyed Differently | Left, Right | Yes | 2 | 0000000 | 000000 |
Key-Controlled Self-Locking Push-Button Combination Deadbolt Door Locks
Gain access from the outside with a combination or an included key. These automatically lock when you close the door. Locks have a latch bolt and a deadlocking latch. The latch can be held in the retracted position to allow unrestricted entry.
Select a lock with the correct backset distance (the distance from the door’s edge to the center of the lock's mounting hole) for your door. Latch bolt projection is the length the latch bolt extends from the door's edge.
Metal door adapter kits (sold separately) include a surface-mounted strike plate, a riser plate, and shims for metal door installations.
For technical drawings and 3-D models, click on a part number.
Outside Faceplate | Inside Faceplate | 2 1/2" Backset Distance | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Thick. | Finish | Combination Type | Keying | Latch Bolt Projection | Ht. | Wd. | Projection | Ht. | Wd. | Projection | For Door Material | For Door Swing Direction | Mounting Hardware Included | Number of Keys Included | Each | |
Kaba Simplex 900 | ||||||||||||||||
| 1 3/4"-2 1/8" | Dull Brass Plated | Five Numbers | Keyed Differently | 5/8" | 3 3/4" | 2 9/16" | 15/16" | 5" | 3 11/16" | 1 9/16" | Wood | Left, Right | Yes | 1 | 0000000 | 0000000 |
Occupied/Vacant Deadbolt Door Locks
Often used on restroom doors, a message on the outside of the door changes when the lock is engaged or disengaged. Locks open with a turnpiece inside and an emergency access tool outside.
Select a lock with the correct backset distance (the distance from the door’s edge to the center of the lock's mounting hole) for your door. Latch bolt projection is the length the latch bolt extends from the door's edge.
For technical drawings and 3-D models, click on a part number.
Outside Faceplate | 2 3/8" or 2 3/4" Backset Distance | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Finish | Material | For Door Thick. | Latch Bolt Projection | Ht. | Wd. | For Door Swing Direction | Includes | Mounting Hardware Included | Each | |
| Dull Brass Plated | Zinc | 1 3/8"-2" | 1" | 2 1/16" | 3 1/2" | Left, Right | Drill Template, Emergency Access Tool | Yes | 00000000 | 0000000 |
| Replacement Emergency-Access Tool | 00000000 | Each | 000000 |
Self-Locking Push-Button Combination Deadbolt Door Locks
Enter a combination and turn the turnpiece to unlock these locks from the outside; they automatically lock when you close the door. Locks have a latch bolt and a deadlocking latch. The latch can be held in the retracted position to allow unrestricted entry.
Select a lock with the correct backset distance (the distance from the door’s edge to the center of the lock's mounting hole) for your door. Latch bolt projection is the length the latch bolt extends from the door's edge.
Metal door adapter kits (sold separately) include a surface-mounted strike plate, a riser plate, and shims for metal door installations.
For technical drawings and 3-D models, click on a part number.
Outside Faceplate | Inside Faceplate | 2 1/2" Backset Distance | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Thick. | Finish | Combination Type | Latch Bolt Projection | Ht. | Wd. | Projection | Ht. | Wd. | Projection | For Door Material | For Door Frame Material | For Door Swing Direction | Mounting Hardware Included | Each | |
Kaba Simplex 900 | |||||||||||||||
| 1 3/8"-1 1/2" | Dull Brass Plated | Five Numbers | 5/8" | 3 3/4" | 2 9/16" | 15/16" | 5" | 3 11/16" | 1 9/16" | Wood | Wood | Left, Right | Yes | 0000000 | 0000000 |
| 1 3/4"-2 1/8" | Dull Brass Plated | Five Numbers | 5/8" | 3 3/4" | 2 9/16" | 15/16" | 5" | 3 11/16" | 1 9/16" | Wood | Wood | Left, Right | Yes | 0000000 | 000000 |
Push-Button Combination Deadbolt Door Locks
Enter a combination and turn the turnpiece to unlock these locks from the outside; turn the inside or outside turnpiece to manually relock them.
Select a lock with the correct backset distance (the distance from the door’s edge to the center of the lock's mounting hole) for your door. Latch bolt projection is the length the latch bolt extends from the door's edge.
Metal door adapter kits (sold separately) include a surface-mounted strike plate, a riser plate, and shims for metal door installations.
For technical drawings and 3-D models, click on a part number.
Outside Faceplate | Inside Faceplate | 2 1/2" Backset Distance | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Thick. | Finish | Combination Type | Latch Bolt Projection | Ht. | Wd. | Projection | Ht. | Wd. | Projection | For Door Material | For Door Frame Material | For Door Swing Direction | Mounting Hardware Included | Each | |
Kaba Simplex 900 | |||||||||||||||
| 1 3/8"-1 1/2" | Dull Brass Plated | Five Numbers | 1" | 3 3/4" | 2 9/16" | 15/16" | 5" | 3 11/16" | 1 9/16" | Wood | Wood | Left, Right | Yes | 0000000 | 0000000 |
| 1 3/4"-2 1/8" | Dull Brass Plated | Five Numbers | 1" | 3 3/4" | 2 9/16" | 15/16" | 5" | 3 11/16" | 1 9/16" | Wood | Wood | Left, Right | Yes | 0000000 | 000000 |