About Cabinet Door and Drawer Locks
More
About Tapping Screws
More
Steel Phillips Flat Head Screws for Sheet Metal
These steel screws are available with corrosion-resistant finishes. They're beveled under the head for use in countersunk holes. Screws penetrate 0.025" and thinner sheet metal. Length is measured from the top of the head.
Nickel-plated steel screws have a decorative finish and are more corrosion resistant than zinc-plated screws.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Flat Head Profile | Dia. | Ht. | Drive Size | Drill Bit Size | Approximate Threads per Inch | Pkg. Qty. | Pkg. | |
No. 4  | |||||||||
| 1/2" | Standard | 0.212" | 0.067" | No. 1 | No. 44 | 24 | 25 | 000000000 | 000000 |
| 5/8" | Standard | 0.212" | 0.067" | No. 1 | No. 44 | 24 | 25 | 000000000 | 00000 |
| 3/4" | Standard | 0.212" | 0.067" | No. 1 | No. 44 | 24 | 25 | 000000000 | 00000 |
No. 5 | |||||||||
| 1/2" | Standard | 0.237" | 0.075" | No. 1 | No. 36 | 22 | 25 | 000000000 | 00000 |
| 3/4" | Standard | 0.237" | 0.075" | No. 1 | No. 36 | 22 | 10 | 000000000 | 0000 |
No. 6 | |||||||||
| 1/2" | Standard | 0.262" | 0.083" | No. 2 | No. 32 | 18 | 25 | 000000000 | 00000 |
| 5/8" | Standard | 0.262" | 0.083" | No. 2 | No. 32 | 18 | 25 | 000000000 | 00000 |
No. 8 | |||||||||
| 5/8" | Standard | 0.312" | 0.1" | No. 2 | No. 29 | 15 | 25 | 000000000 | 00000 |
| 3/4" | Standard | 0.312" | 0.1" | No. 2 | No. 29 | 15 | 10 | 000000000 | 0000 |
Blunt Screws for Wood
Often used for drawer slides and cabinet hardware, these screws—also known as Euro and Type B screws—create a strong hold in small, shallow holes in wood. They have a blunt tip that distributes strength throughout the entire length of the thread. They also form deep threads in materials such as particleboard, medium-density fiberboard, and hardwood. All of these screws are beveled under the head for use in countersunk holes. They require a drilled hole.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Length | Diameter | Height | Drive Size | Approximate Threads per Inch | Threading | Tapping Screw Type | Pkg. Qty. | Pkg. | |
Steel | |||||||||
1/4" | |||||||||
| 3/8" | 0.295" | 3/32" | No. 2 | 11 | Fully Threaded | B | 50 | 000000000 | 00000 |
| 7/16" | 0.295" | 3/32" | No. 2 | 11 | Fully Threaded | B | 50 | 000000000 | 0000 |
| 1/2" | 0.295" | 3/32" | No. 2 | 11 | Fully Threaded | B | 50 | 000000000 | 0000 |
| 9/16" | 0.295" | 3/32" | No. 2 | 11 | Fully Threaded | B | 50 | 000000000 | 0000 |
| 13/16" | 0.295" | 3/32" | No. 2 | 11 | Fully Threaded | B | 50 | 000000000 | 00000 |
Through-Panel-Mount Connectors
Before making a permanent connection, use these connectors to test a circuit. Also known as binding posts, they mount through panels to create a connection point.
All connectors are insulated to prevent contact with panels.
Nickel-plated brass offers a good compromise between conductivity and longevity.
For technical drawings and 3-D models, click on a part number.
| For Use With | For Panel Thick. | Current Per Circuit, A | For Panel Cutout Dia. | No. of Panel Cutouts | Material | Installation | Color | Each | |
Single Hex-Head Post | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Bare Stranded Wire, Spade Terminals | 0.06"-0.13" | 30 | 0.31" | 1 | Nickel-Plated Brass | Wrench | Black | 0000000 | 000000 |
| Bare Stranded Wire, Spade Terminals | 0.06"-0.13" | 30 | 0.31" | 1 | Nickel-Plated Brass | Wrench | Red | 0000000 | 00000 |
Single Fluted Post | |||||||||
| Banana Plugs, Bare Stranded Wire, Spade Terminals | 0.01"-0.11" | 60 | 0.43" | 1 | Nickel-Plated Brass | Hand Tighten | Black | 0000000 | 00000 |
| Banana Plugs, Bare Stranded Wire, Spade Terminals | 0.01"-0.11" | 60 | 0.43" | 1 | Nickel-Plated Brass | Hand Tighten | Red | 0000000 | 00000 |
Keyed Alike Deadbolt Drawer Locks
Choose these locks if you need several locks that open with the same key.
For technical drawings and 3-D models, click on a part number.
Locks | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Case | Mounting Holes | Replacement Keys | ||||||||||||||
| For Max. Thick. | Key Number | For Through Hole Dia. | Rear Projection | Latch Bolt Projection | Ht. | Wd. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Style | For Use On | Each | Each | ||
Nickel-Plated Zinc—Polished | ||||||||||||||||
| 3/4" | EB018 | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 000000 | 00000000 | 00000 |
| 3/4" | EB079 | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
| 3/4" | EB121 | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
| 3/4" | EB127 | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
| 7/8" | EB019 | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
| 7/8" | EB092 | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
| 7/8" | EB123 | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
| 1 1/8" | EB020 | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
Deadbolt Drawer Locks
Choose these locks if you need locks that each open with a different key.
For technical drawings and 3-D models, click on a part number.
Case | Mounting Holes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Thick. | For Through Hole Dia. | Rear Projection | Latch Bolt Projection | Ht. | Wd. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Style | For Use On | Each | |
Nickel-Plated Zinc—Polished | |||||||||||||
| 3/4" | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 0000000 | 000000 |
| 7/8" | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 0000000 | 00000 |
| 1 1/8" | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 0000000 | 00000 |
Master Keyed Deadbolt Drawer Locks
Choose these locks if you need locks that each open with a different key and also open with a master key. Two keys are included; master keys are sold separately.
For technical drawings and 3-D models, click on a part number.
Locks | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Case | Mounting Holes | Master Keys | ||||||||||||||
| For Max. Thick. | Master Key Number | For Through Hole Dia. | Rear Projection | Latch Bolt Projection | Ht. | Wd. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Style | For Use On | Each | Each | ||
Nickel-Plated Zinc—Polished | ||||||||||||||||
| 3/4" | Z001 | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 000000 | 000000 | 00000 |
| 7/8" | Z011 | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 0000000 | 0000 |
| 1 1/8" | EZ005 | 7/8" | 1/4" | 3/8" | 1 3/8" | 2" | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 000000 | 0000 |
Master Keyed Deadbolt Cabinet Door Locks
Choose these locks if you need locks that each open with a different key and also open with a master key. Two keys are included; master keys are sold separately.
For technical drawings and 3-D models, click on a part number.
Locks | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Case | Mounting Holes | Master Keys | |||||||||||||||
| For Max. Thick. | Master Key Number | For Through Hole Dia. | Rear Projection | Latch Bolt Projection | Ht. | Wd. | Lock Cylinder Material | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Style | For Use On | Each | Each | ||
Nickel-Plated Zinc—Polished | |||||||||||||||||
| 3/4" | Z001 | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 000000 | 000000 | 00000 |
| 7/8" | Z011 | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 0000000 | 0000 |
| 1 1/8" | EZ005 | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 000000 | 0000 |
Deadbolt Cabinet Door Locks
Choose these locks if you need locks that each open with a different key.
For technical drawings and 3-D models, click on a part number.
Case | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Thick. | For Through Hole Dia. | Rear Projection | Latch Bolt Projection | Ht. | Wd. | Lock Cylinder Material | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Style | For Use On | Each | |
Nickel-Plated Zinc—Polished | ||||||||||||||
| 3/4" | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 0000000 | 000000 |
| 7/8" | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 0000000 | 00000 |
| 1 1/8" | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 0000000 | 00000 |
Keyed Alike Deadbolt Cabinet Door Locks
Choose these locks if you need several locks that open with the same key.
For technical drawings and 3-D models, click on a part number.
Locks | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Case | Mounting Holes | Replacement Keys | |||||||||||||||
| For Max. Thick. | Key Number | For Through Hole Dia. | Rear Projection | Latch Bolt Projection | Ht. | Wd. | Lock Cylinder Material | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Style | For Use On | Each | Each | ||
Nickel-Plated Zinc—Polished | |||||||||||||||||
| 3/4" | EB018 | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 000000 | 00000000 | 00000 |
| 3/4" | EB079 | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
| 3/4" | EB121 | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
| 3/4" | EB127 | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
| 7/8" | EB019 | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
| 7/8" | EB092 | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
| 7/8" | EB123 | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
| 1 1/8" | EB020 | 7/8" | 1/4" | 3/8" | 2" | 1 3/8" | Zinc | Yes | 2 | 5/32" | 1 7/16" | Countersunk | Wood | 00000000 | 00000 | 00000000 | 0000 |
Keyed Alike Deadbolt File Cabinet Locks
Choose these locks if you need several locks that open with the same key. Use them to replace locks in file cabinets that have existing mounting brackets.
For technical drawings and 3-D models, click on a part number.
Back Slot | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Key Number | Lg. | Wd. | Ht. | Wd. | Dp. | Latch Bolt Projection | Fastener Type | Mounting Fasteners Included | Each | |
Round Latch Bolt | ||||||||||
Nickel-Plated Zinc—Dull | ||||||||||
| L006 | 1 3/4" | 9/16" | 13/16" | 1/8" | 1/2" | 1/8" | Screw | Yes | 0000000 | 000000 |
| L007 | 1 3/4" | 9/16" | 13/16" | 1/8" | 1/2" | 1/8" | Spring Pin | Yes | 0000000 | 00000 |
| L008 | 1 3/4" | 9/16" | 13/16" | 1/8" | 5/16" | 1/8" | Spring Pin | Yes | 0000000 | 00000 |
| L009 | 1 3/4" | 9/16" | 13/16" | 1/8" | 5/16" | 1/8" | Screw | Yes | 0000000 | 00000 |
Keyed Deadbolt File Cabinet Locks
Choose these locks if you need locks that each open with a different key. Use them to replace locks in file cabinets that have existing mounting brackets.
For technical drawings and 3-D models, click on a part number.
Back Slot | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | Wd. | Dp. | Latch Bolt Projection | Fastener Type | Mounting Fasteners Included | Each | |
Round Latch Bolt | |||||||||
Nickel-Plated Zinc—Dull | |||||||||
| 1 3/4" | 9/16" | 13/16" | 1/8" | 5/16" | 1/8" | Screw | Yes | 0000000 | 000000 |
| 1 3/4" | 9/16" | 13/16" | 1/8" | 5/16" | 1/8" | Spring Pin | Yes | 0000000 | 00000 |
| 1 3/4" | 9/16" | 13/16" | 1/8" | 1/2" | 1/8" | Screw | Yes | 0000000 | 00000 |
| 1 3/4" | 9/16" | 13/16" | 1/8" | 1/2" | 1/8" | Spring Pin | Yes | 0000000 | 00000 |