System of Measurement System of Measurement |
|---|
|
Length Length |
|---|
|
|
|
Head Type Head Type | Show |
|---|
 | Eye |
Minimum Thread Length Minimum Thread Length |
|---|
|
|
|
Head Height Head Height |
|---|
|
|
|
Material Material |
|---|
|
Threading Threading |
|---|
 | Partially Threaded |
Tensile Strength Tensile Strength |
|---|
|
Anchor Type Anchor Type |
|---|
 | Toggle Eyebolt |
 | Wedge Eyebolt |
Capacity Capacity |
|---|
|
Thread Direction Thread Direction |
|---|
 | |
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Hardness Hardness |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
About Hex Head Screws and Bolts
More
Machine Screw-Style Hangers
Also known as spade bolts, you can use these versatile hangers in a threaded hole (as you would a screw), or secure them with a nut (as you would a bolt). Zinc plating provides corrosion resistance in wet environments. Material meets ASTM A307 or F2282 specifications for quality.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Lg. | Threading | Thread Lg. | Thread Spacing | Eye Dia. | Wd. | Thick. | Ht. | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||||||||
| 6-32 | 3/4" | Partially Threaded | 5/16" | Coarse | 1/8" | 7/32" | 1/32" | 7/16" | ASTM F2282 | 10 | 000000000 | 000000 |
| 6-32 | 1 5/16" | Partially Threaded | 1" | Coarse | 3/32" | 7/32" | 1/32" | 1/4" | ASTM F2282 | 10 | 000000000 | 00000 |
| 8-32 | 15/16" | Partially Threaded | 7/16" | Coarse | 1/8" | 1/4" | 1/16" | 13/32" | ASTM F2282 | 10 | 000000000 | 00000 |
| 8-32 | 1 7/16" | Partially Threaded | 1" | Coarse | 1/8" | 1/4" | 1/16" | 3/8" | ASTM F2282 | 10 | 000000000 | 00000 |
| 10-32 | 1 1/4" | Partially Threaded | 11/16" | Fine | 1/8" | 5/16" | 1/16" | 1/2" | ASTM F2282 | 10 | 000000000 | 00000 |
| 10-32 | 1 9/16" | Partially Threaded | 1" | Fine | 1/8" | 5/16" | 1/16" | 1/2" | ASTM F2282 | 10 | 000000000 | 00000 |
| 1/4"-20 | 2" | Partially Threaded | 7/8" | Coarse | 7/32" | 3/8" | 3/32" | 3/4" | ASTM A307 | 10 | 000000000 | 00000 |
| 1/4"-20 | 3" | Partially Threaded | 1 7/8" | Coarse | 7/32" | 3/8" | 3/32" | 3/4" | ASTM A307 | 10 | 000000000 | 00000 |
| 3/8"-16 | 2 1/4" | Partially Threaded | 7/8" | Coarse | 9/32" | 19/32" | 5/32" | 1 1/8" | ASTM A307 | 10 | 000000000 | 00000 |
| 3/8"-16 | 4 1/4" | Partially Threaded | 2 7/8" | Coarse | 9/32" | 19/32" | 5/32" | 1 1/8" | ASTM A307 | 5 | 000000000 | 00000 |
| 1/2"-13 | 3 7/16" | Partially Threaded | 2" | Coarse | 11/32" | 3/4" | 7/32" | 1 1/4" | ASTM A307 | 5 | 000000000 | 00000 |
| 1/2"-13 | 4 7/16" | Partially Threaded | 3" | Coarse | 11/32" | 3/4" | 7/32" | 1 1/4" | ASTM A307 | 5 | 000000000 | 00000 |
Eye Nut-Style Hangers
These hangers have internal threads for use with threaded rods, bolts, and anchors. They’re zinc plated for corrosion resistance in wet environments.
For technical drawings and 3-D models, click on a part number.
Wedge Anchor-Style Hangers
Drill a hole into concrete or other hard surfaces, and hammer in these hangers. Once the hanger is inserted, pulling on the head with the claw of a hammer will cause the base to expand, wedging the hanger in place. They’re zinc plated for corrosion resistance in wet environments.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | For Hole Dia. | Shank Dia. | Eye Dia. | Wd. | Thick. | Ht. | Min. Installation Dp. | Max. Capacity, lbs. | For Use In | Removable | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||||||
| 2 1/4" | 1/4" | 1/4" | 1/4" | 17/32" | 3/16" | 19/32" | 1 1/4" | 290 | Concrete | Permanent | 10 | 000000000 | 000000 |
Toggle Bolt-Style Hangers
These hangers are a popular choice for overhead applications. To install, insert the bolt through your fixture and thread the toggle onto it. Next, fold the toggle wings flush against the bolt and push them through a drilled hole until they pop open on the other side. Pull back on the bolt and tighten. They’re zinc plated for corrosion resistance in wet environments. Dimensions meet ASME B18.6.3 specifications.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Lg. | Threading | Thread Spacing | Max. Usable Lg. | For Hole Dia. | Eye Dia. | Wd. | Thick. | Ht. | For Use In | Specifications Met | Includes | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||||||||
| 1/4"-20 | 4" | Partially Threaded | Coarse | 1 5/8" | 5/8" | 7/32" | 3/8" | 3/32" | 11/16" | Drywall, Plaster | ASME B18.6.3 | Nut, Toggle, Washer | 5 | 000000000 | 00000 |
| 1/4"-20 | 5" | Partially Threaded | Coarse | 2 1/2" | 5/8" | 7/32" | 3/8" | 3/32" | 11/16" | Drywall, Plaster | ASME B18.6.3 | Nut, Toggle, Washer | 5 | 000000000 | 00000 |
Toggle Bolt-Style Hangers with Spring
These hangers are a popular choice for overhead applications. The spring holds the washer and toggle against opposite sides of the wall, so everything's in position before you begin tightening. To install, insert the bolt through your fixture and thread the toggle onto it. Next, fold the toggle wings flush against the bolt and push them through a drilled hole until they pop open on the other side. Once tightened, the spring adds vibration resistance. Zinc yellow-chromate plating provides corrosion resistance in wet environments. Dimensions meet ASME B18.6.3 specifications.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Lg. | Threading | Thread Spacing | Max. Usable Lg. | For Hole Dia. | Eye Dia. | Wd. | Thick. | Ht. | For Use In | Specifications Met | Includes | Pkg. Qty. | Pkg. | |
Zinc Yellow-Chromate Plated Steel | |||||||||||||||
| 1/4"-20 | 5" | Partially Threaded | Coarse | 2 1/4" | 3/4" | 1/4" | 3/8" | 3/32" | 15/16" | Drywall | ASME B18.6.3 | Spring, Toggle, Washer | 5 | 000000000 | 000000 |
Wood Screw-Style Hangers
Drive these hangers into wood with an adjustable wrench, pliers, or a special driver bit (sold separately). They’re also known as eye lags.
Zinc- and zinc yellow-chromate plated steel hangers are corrosion resistant in wet environments. The zinc yellow-chromate plated steel hangers meet quality standards outlined in ASTM B633 and dimensional standards outlined in ASME B18.2.1.
316 stainless steel hangers have excellent resistance to chemicals and salt water. They’re best for corrosive and marine environments.
For technical drawings and 3-D models, click on a part number.
Hangers | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Head | Driver Bits | |||||||||||||
| Screw Size | Lg. | Threading | Thread Lg. | Eye Dia. | Wd. | Thick. | Ht. | For Use In | Specifications Met | Pkg. Qty. | Pkg. | Each | ||
Zinc-Plated Steel | ||||||||||||||
| 1/4" | 6" | Partially Threaded | 1 1/2" | 3/16" | 13/32" | 3/32" | 23/32" | Wood | __ | 25 | 000000000 | 000000 | 0000000 | 00000 |
Zinc Yellow-Chromate Plated Steel | ||||||||||||||
| 1/4" | 3" | Partially Threaded | 1 1/2" | 3/16" | 13/32" | 3/32" | 23/32" | Wood | ASME B18.2.1, ASTM B633 | 50 | 000000000 | 00000 | 0000000 | 0000 |
| 1/4" | 4" | Partially Threaded | 1 1/2" | 3/16" | 13/32" | 3/32" | 23/32" | Wood | ASME B18.2.1, ASTM B633 | 25 | 000000000 | 00000 | 0000000 | 0000 |
| 1/4" | 5" | Partially Threaded | 1 1/2" | 3/16" | 13/32" | 3/32" | 23/32" | Wood | ASME B18.2.1, ASTM B633 | 25 | 000000000 | 00000 | 0000000 | 0000 |
| 5/16" | 3 1/2" | Partially Threaded | 1 3/4" | 1/4" | 7/16" | 3/32" | 9/16" | Wood | ASME B18.2.1, ASTM B633 | 25 | 000000000 | 00000 | 0000000 | 0000 |
316 Stainless Steel | ||||||||||||||
| 1/4" | 3" | Partially Threaded | 1 1/2" | 3/16" | 13/32" | 3/32" | 23/32" | Wood | __ | 25 | 000000000 | 00000 | 0000000 | 0000 |
Drilling Screw-Style Hangers
Drill holes with the point on these hangers. Install with a special driver bit (sold separately).
Zinc-yellow-chromate-plated hangers are corrosion resistant in wet environments. Zinc-yellow-chromate-plated hangers with a 3/8" head width can drill through steel sheet metal as thick as 16 ga. Some hangers with a 7/16" head width can drill through steel as thick as 12 ga.; others can drill through sheet metal and wood.
Blue ultra-corrosion-resistant-coated hangers are 40 times as corrosion resistant as zinc-yellow-chromate-plated hangers, withstanding up to 1,000 hours of salt spray. They can drill into structural steel up to 1/4", such as steel beams. They’re not for use with sheet metal thinner than 12 ga.
For technical drawings and 3-D models, click on a part number.
Hangers | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Head | Driver Bits | |||||||||||||||
| Finish Manufacturer Equivalent | Screw Size | Drill Tip Lg. | Max. Drilling Thick. | Lg. | Threading | Thread Lg. | Eye Dia. | Thick. | Ht. | Material | For Use In | Pkg. Qty. | Pkg. | Each | ||
Blue Corrosion-Resistant-Coated Steel | ||||||||||||||||
3/8" Head Wd. | ||||||||||||||||
| Ruspert | 1/4" | 5/16" | 1/4" | 2 1/4" | Partially Threaded | 1" | 3/16" | 3/32" | 1 1/8" | Blue Corrosion-Resistant-Coated Steel | Steel | 25 | 000000000 | 000000 | 000000000 | 00000 |
Zinc Yellow-Chromate Plated Steel | ||||||||||||||||
3/8" Head Wd. | ||||||||||||||||
| __ | 1/4" | 1/4" | 1/32" | 3 1/4" | Partially Threaded | 1 3/4" | 3/16" | 3/32" | 1 1/8" | Zinc Yellow-Chromate Plated Steel | Sheet Metal | 25 | 000000000 | 00000 | 000000000 | 0000 |
| __ | 1/4" | 1/4" | 1/32" | 3 3/4" | Partially Threaded | 2 1/2" | 3/16" | 3/32" | 1 1/8" | Zinc Yellow-Chromate Plated Steel | Sheet Metal | 25 | 000000000 | 00000 | 000000000 | 0000 |
7/16" Head Wd. | ||||||||||||||||
| __ | 1/4" | __ | 0.038" | 2 3/4" | Partially Threaded | 1 1/2" | 3/16" | 3/32" | 9/16" | Zinc Yellow-Chromate Plated Steel | Sheet Metal, Wood | 25 | 000000000 | 00000 | 000000000 | 00000 |
| __ | 1/4" | 5/16" | 0.038" | 2 3/4" | Partially Threaded | 1 1/2" | 3/16" | 3/32" | 9/16" | Zinc Yellow-Chromate Plated Steel | Steel | 25 | 000000000 | 00000 | 000000000 | 00000 |
| __ | 1/4" | 5/16" | 0.155" | 2" | Partially Threaded | 3/4" | 7/32" | 3/32" | 19/32" | Zinc Yellow-Chromate Plated Steel | Steel | 25 | 000000000 | 00000 | 000000000 | 00000 |