Made from Grade 8 steel, these screws can be used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems. They are at least 25% stronger than medium-strength steel screws.

Choose these screws for their adherence to strict military standards for material and construction. Their high tensile strength means they can be used in demanding, high-stress applications.

Twice as strong as low-strength steel screws, these screws are suitable for fastening most machinery and equipment.

About half as strong as medium-strength steel screws, these screws can be used for light duty fastening applications, such as securing access panels.

Use these general purpose 18-8 stainless steel screws for a variety of fastening applications. They have good chemical resistance.

More corrosion resistant than 18-8 stainless steel screws, these 316 stainless steel screws have excellent resistance to chemicals and salt water.

With the strength of steel and the corrosion resistance of 18-8 stainless steel, these 17-4 PH stainless steel screws are suitable for high-strength fastening in corrosive environments.

Aluminum screws are one-third the weight of steel and have good corrosion resistance.

Our most corrosion-resistant metal screws, titanium screws withstand salt water, acids, and chemicals. They have a high strength-to-weight ratio—stronger than medium-strength steel screws and about 40% lighter.

Fiberglass screws are stronger than plastic screws, chemical and oil resistant, nonconductive, and lightweight.

Made from Grade 8 steel, these screws can be used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems. They are at least 25% stronger than medium-strength steel screws. The flange distributes pressure over the surface, eliminating the need for a washer.

Comparable in strength to Grade 9 screws, these are about 20% stronger than high-strength steel screws and often used in heavy duty applications, such as stamping and earth-moving equipment. The flange eliminates the need for a washer.

For strength comparable to that of Grade 9 steel and the corrosion resistance of stainless steel, choose these screws. They are work-hardened for extreme strength. The flange eliminates the need for a separate washer.

About 20% stronger than medium-strength steel screws, these Grade 8 steel screws can be used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems. Serrations under the flange provide mild vibration resistance.

More corrosion resistant than 18-8 stainless steel screws, these 316 stainless steel screws have excellent resistance to chemicals and salt water. A serrated flange provides mild vibration resistance.

Made from Grade 8 steel, these screws can be used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems. They are more than twice as strong as our stainless steel thread-locking screws. The thread locker helps resist loosening from vibration.

These Grade 5 steel screws are over 70% stronger than our stainless steel wire-lockable hex head screws. Wire these screws together through the hole in the head to get more vibration resistance than any other screw.

The standard for high-strength fastening.

Tighten these screws by turning them to the left; once fastened, they prevent counterclockwise-moving parts from loosening.

These screws are specially tempered to meet ASTM A193 specifications for temperatures up to 1100° F.

Choose these screws for their adherence to strict military standards for material and construction. Screws are 18-8 stainless steel for good chemical resistance.

These screws are hardened to be 40% stronger than standard 316 stainless steel screws, yet they still have excellent corrosion resistance. Use them in chemical and marine applications.

Plastic screws are chemical and oil resistant, nonconductive, and lightweight.

Brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

Made of alloy steel, these low-profile screws are nearly twice as strong as their stainless steel counterparts. With half the height of a standard socket head, these low-profile screws fit in tight spaces.

More corrosion resistant than 18-8 stainless steel screws, these 316 stainless steel screws have excellent resistance to chemicals and salt water. Use these low-profile screws where space is limited.

Made from alloy steel, these screws are nearly twice as strong as stainless steel low-profile screws. With a head height one-third the size of a standard socket head, they fit in the tightest spaces.

For use where sideways forces are a concern, these screws have a precisely measured unthreaded portion (grip) for a strong hold. Their flanged head distributes pressure where the screw meets the surface, so you don't need a washer.

These screws have good chemical resistance. A thread locker bonded to the threads prevents loosening from vibration.

Stainless steel screws have excellent corrosion resistance in most environments. Wire these screws together for more vibration resistance than other types of socket head screws.

Drilled through the head and shaft, these screws vent fluid and gases trapped below the screw, making them good for vacuum applications.

The nylon patch bonded to the threads of these socket head screws adds friction to keep vibration from loosening them, while their O-ring prevents leaks and seals out contaminants.

The nonmarring brass tip is electrically conductive and harder than nylon, but soft enough to conform to most surfaces and reduce damage from metal-on-metal contact.

18-8 stainless steel button head screws have good chemical resistance and may be mildly magnetic.

18-8 stainless steel pan head screws have good chemical resistance and may be mildly magnetic.

Choose these screws for their adherence to strict military standards for material and construction.

Choose these screws for their adherence to strict military standards for material and construction.

These 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic. The extra-wide truss head distributes holding pressure to reduce the likelihood of crushing thin material.

Stainless steel screws have excellent corrosion resistance in most environments.

A zinc plating provides mild corrosion resistance.

Made from brass, these screws are corrosion resistant in wet environments, nonmagnetic, and electrically conductive.

These pan head screws are zinc plated for corrosion resistance in wet environments.

A zinc plating provides mild corrosion resistance.

These screws have good chemical resistance.

Made from 18-8 stainless steel, these screws have good chemical resistance and may be mildly magnetic. Torx and Torx-Plus drives have more points of contact than other drives, allowing you to tighten the screw without damaging the recess.

Made from alloy steel, these screws are nearly twice as strong as stainless steel button head screws. They have a flange that distributes pressure across a wide surface, eliminating the need for a separate washer.

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water. They have a flange that distributes pressure across a wide surface, eliminating the need for a separate washer. Screws may be mildly magnetic.

These 18-8 stainless steel button head screws have good chemical resistance and may be mildly magnetic. The tamper-resistant Torx drive (also known as a pin-in Torx drive) makes them difficult to remove without special tools.

These 18-8 stainless steel button head screws have good chemical resistance and may be mildly magnetic. The tamper-resistant hex drive (also known as a pin-in hex drive) makes them difficult to remove without special tools.

Made from 18-8 stainless steel, these screws have good chemical resistance and may be mildly magnetic. A nylon patch bonded to the threads adds friction to prevent loosening from vibration.

These 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

Choose these screws for their adherence to strict military standards for material and construction.

These screws have good chemical resistance and may be mildly magnetic.

These steel screws have a zinc plating for mild corrosion resistance.

Brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

These 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

These screws are chemical and oil resistant, nonconductive, and lightweight. Exposure to moisture may cause them to expand.

Brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

Made from alloy steel, these screws are twice as strong as standard steel Torx flat head screws.

With a tamper-resistant Torx or Torx Plus drive (also known as a pin-in Torx or Torx Plus drive), these screws are difficult to remove without special tools.

Made from alloy steel, these screws are nearly twice as strong as stainless steel flat head screws.

Comparable in strength to Grade 8 steel. These screws have inch thread sizes.

These shoulder screws come with a traceable lot number and material test report. Similar in strength to Grade 8 steel.

With inch-sized threads the same diameter as the shoulder, these screws can handle heavy loads. They’re 18-8 stainless steel for good chemical resistance.

Shoulder screws made of 17-4 PH stainless steel are nearly twice as strong as 18-8 stainless steel and have the same corrosion resistance. These screws have inch thread sizes.

Made of lubricant-filled nylon, these screws have a slippery surface to resist wear in high-friction applications.

These have a head height about one-third the head height of a standard shoulder screw.

A locking element on the threads adds friction to resist loosening. Comparable to Grade 8 steel, these alloy steel shoulder screws are the strongest we offer.

More corrosion resistant than 18-8 stainless steel shoulder screws, these have excellent resistance to chemicals and salt water.

Without a head to get in the way, these screws fit in tight spaces where standard shoulder screws cannot. Either thread them in a countersunk hole for a flush mount, or install them with the shoulder sticking out to use them as pins or dowels for aligning and locating components.

Brass shoulder screws are electrically conductive, nonmagnetic, and have good corrosion resistance.