Clear All
Thread Spacing Thread Spacing | Show |
|---|
Thread Spacing Thread Spacing | Hide |
|---|
Length Length |
|---|
Material Material |
|---|
|
Tip Type Tip Type |
|---|
 | Ball |
Thread Direction Thread Direction |
|---|
 | |
Hardness Hardness |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Drive Style Drive Style |
|---|
 | |
Threading Threading |
|---|
 | Fully Threaded |
Tip Material Tip Material |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Round-Head Thumb Screw Profile Round-Head ThumbScrew Profile |
|---|
 | Narrow |
Thumb Screw Head Shape Thumb Screw Head Shape |
|---|
 | Round |
About Threaded Studs and Rods
More
About Set Screws
More
About Thumb Screw and Binding Post Materials
More
Ultra-Fine-Thread Ball-Point Set Screws
Fine threads give you precise control. A rolling ball swivels 360° to minimize surface damage and allow for slight adjustments without loosening the screw. Made from 18-8 stainless steel, these set screws are chemical resistant and may be mildly magnetic. To install screws in unthreaded holes, use an optional threaded insert (sold separately). Length listed is the overall length.
For technical drawings and 3-D models, click on a part number.
18-8 Stainless Steel Set Screws
Tip | ||||||
|---|---|---|---|---|---|---|
| Lg. | Dia. | Material | Drive Size | Hardness | Each | |
6-80 | ||||||
| 3/8" | 0.094" | Alloy Steel | 5/64" | Not Rated | 000000000 | 000000 |
| 7/16" | 0.094" | Alloy Steel | 5/64" | Not Rated | 000000000 | 00000 |
| 1/2" | 0.094" | Alloy Steel | 5/64" | Not Rated | 000000000 | 00000 |
| 37/64" | 0.094" | Alloy Steel | 5/64" | Not Rated | 000000000 | 00000 |
| 3/4" | 0.094" | Alloy Steel | 5/64" | Not Rated | 000000000 | 00000 |
| 7/8" | 0.094" | Alloy Steel | 5/64" | Not Rated | 000000000 | 00000 |
| 1" | 0.094" | Alloy Steel | 5/64" | Not Rated | 000000000 | 00000 |
| 1 1/8" | 0.094" | Alloy Steel | 5/64" | Not Rated | 000000000 | 00000 |
| 1 1/4" | 0.094" | Alloy Steel | 5/64" | Not Rated | 000000000 | 00000 |
| 1 1/2" | 0.094" | Alloy Steel | 5/64" | Not Rated | 000000000 | 00000 |
3/16"-100 | ||||||
| 3/8" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 1" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 1 1/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 1 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 1 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
1/4"-80 | ||||||
| 3/8" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 1" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 1 1/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 1 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 1 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 2 1/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 2 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 2 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 3" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 3 1/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 3 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 3 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
1/4"-100 | ||||||
| 3/8" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 1" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 1 1/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 1 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 1 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 2 1/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 2 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 2 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 3" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 3 1/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 3 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 3 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
Metric 18-8 Stainless Steel Set Screws
Tip | ||||||
|---|---|---|---|---|---|---|
| Lg., mm | Dia., mm | Material | Drive Size, mm | Hardness | Each | |
M2.5 × 0.2 mm | ||||||
| 8 | 1.5 | Alloy Steel | 1.5 | Not Rated | 000000000 | 000000 |
| 10 | 1.5 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 12 | 1.5 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 15 | 1.5 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 20 | 1.5 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 25 | 1.5 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
M3 × 0.2 mm | ||||||
| 8 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 10 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 12 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 15 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 20 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 25 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 30 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 33 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 36 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 39 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
M3 × 0.25 mm | ||||||
| 8 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 10 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 12 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 15 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 20 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 25 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 30 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 33 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 36 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 39 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
Brass Optional Threaded Inserts
Flange | ||||||
|---|---|---|---|---|---|---|
| Installed Lg. | Dia. | Thick. | For Max. Hole Dia. | Drill Bit Size | Each | |
6-80 | ||||||
| 0.25" | 1/4" | 0.03" | 7/32" | 7/32" | 000000000 | 00000 |
| 0.375" | 1/4" | 0.03" | 7/32" | 7/32" | 000000000 | 0000 |
3/16"-100 | ||||||
| 0.313" | 0.29" | 0.01" | 1/4" | 1/4" | 000000000 | 0000 |
| 0.438" | 0.29" | 0.01" | 1/4" | 1/4" | 000000000 | 0000 |
| 0.625" | 0.29" | 0.01" | 1/4" | 1/4" | 000000000 | 0000 |
| 0.75" | 0.29" | 0.01" | 1/4" | 1/4" | 000000000 | 0000 |
1/4"-80 | ||||||
| 0.313" | 0.352" | 0.01" | 5/16" | 5/16" | 000000000 | 0000 |
| 0.438" | 0.352" | 0.01" | 5/16" | 5/16" | 000000000 | 0000 |
| 0.625" | 0.352" | 0.01" | 5/16" | 5/16" | 000000000 | 0000 |
| 0.75" | 0.352" | 0.01" | 5/16" | 5/16" | 000000000 | 0000 |
1/4"-100 | ||||||
| 0.313" | 0.352" | 0.01" | 5/16" | 5/16" | 000000000 | 0000 |
| 0.438" | 0.352" | 0.01" | 5/16" | 5/16" | 000000000 | 0000 |
| 0.625" | 0.352" | 0.01" | 5/16" | 5/16" | 000000000 | 0000 |
| 0.75" | 0.352" | 0.01" | 5/16" | 5/16" | 000000000 | 0000 |
Metric Brass Optional Threaded Inserts
Flange | ||||||
|---|---|---|---|---|---|---|
| Installed Lg., mm | Dia., mm | Thick., mm | For Max. Hole Dia., mm | Drill Bit Size, mm | Each | |
M2.5 × 0.2 mm | ||||||
| 7 | 4.5 | 0.5 | 4 | 4 | 000000000 | 00000 |
M3 × 0.2 mm | ||||||
| 5 | 4.95 | 0.25 | 4.5 | 4.5 | 000000000 | 0000 |
| 7 | 4.95 | 0.25 | 4.5 | 4.5 | 000000000 | 0000 |
| 9 | 4.95 | 0.25 | 4.5 | 4.5 | 000000000 | 0000 |
M3 × 0.25 mm | ||||||
| 5 | 4.95 | 0.25 | 4.5 | 4.5 | 000000000 | 0000 |
| 7 | 4.95 | 0.25 | 4.5 | 4.5 | 000000000 | 0000 |
| 9 | 4.95 | 0.25 | 4.5 | 4.5 | 000000000 | 0000 |
Ultra-Fine-Thread Plastic-Head Thumb Screws
Fine threads give you precise control. They have a ball bearing tip that adjusts to angled surfaces and minimizes damage from surface contact. They have a lightweight and nonconductive plastic head and chemical-resistant 18-8 stainless steel threads. The head is knurled for slip-resistant controlled adjustment. Length is measured from under the head.
Optional threaded inserts can be used to install these thumb screws into existing holes.
For technical drawings and 3-D models, click on a part number.
Thumb Screws
Thumb Screws
Head | ||||||||
|---|---|---|---|---|---|---|---|---|
| Lg. | Tip Dia. | Dia. | Ht. | Max. Temperature, °F | Color | Tensile Strength, psi | Each | |
18-8 Stainless Steel | ||||||||
3/16"-100 | ||||||||
| 3/4" | 1/8" | 3/8" | 7/16" | 180° | Black | 60,000 | 000000000 | 000000 |
| 1" | 1/8" | 3/8" | 7/16" | 180° | Black | 60,000 | 000000000 | 00000 |
| 1 1/4" | 1/8" | 3/8" | 7/16" | 180° | Black | 60,000 | 000000000 | 00000 |
| 1 1/2" | 1/8" | 3/8" | 7/16" | 180° | Black | 60,000 | 000000000 | 00000 |
| 1 3/4" | 1/8" | 3/8" | 7/16" | 180° | Black | 60,000 | 000000000 | 00000 |
1/4"-80 | ||||||||
| 3/4" | 3/16" | 1/2" | 3/4" | 180° | Black | 60,000 | 000000000 | 00000 |
| 1" | 3/16" | 1/2" | 3/4" | 180° | Black | 60,000 | 000000000 | 0000 |
| 1 1/4" | 3/16" | 1/2" | 3/4" | 180° | Black | 60,000 | 000000000 | 0000 |
| 1 1/2" | 3/16" | 1/2" | 3/4" | 180° | Black | 60,000 | 000000000 | 0000 |
| 2" | 3/16" | 1/2" | 3/4" | 180° | Black | 60,000 | 000000000 | 00000 |
| 3" | 3/16" | 1/2" | 3/4" | 180° | Black | 60,000 | 000000000 | 00000 |
| 3 1/2" | 3/16" | 1/2" | 3/4" | 180° | Black | 60,000 | 000000000 | 00000 |
Optional Threaded Inserts
Threaded Inserts
Flange | ||||||
|---|---|---|---|---|---|---|
| Installed Lg. | Dia. | Thick. | For Max. Hole Dia. | Drill Bit Size | Each | |
Brass | ||||||
3/16"-100 | ||||||
| 5/16" | 0.29" | 0.01" | 1/4" | 1/4" | 000000000 | 00000 |
| 7/16" | 0.29" | 0.01" | 1/4" | 1/4" | 000000000 | 0000 |
| 5/8" | 0.29" | 0.01" | 1/4" | 1/4" | 000000000 | 0000 |
| 3/4" | 0.29" | 0.01" | 1/4" | 1/4" | 000000000 | 0000 |
1/4"-80 | ||||||
| 5/16" | 0.352" | 0.01" | 5/16" | 5/16" | 000000000 | 0000 |
| 7/16" | 0.352" | 0.01" | 5/16" | 5/16" | 000000000 | 0000 |
| 5/8" | 0.352" | 0.01" | 5/16" | 5/16" | 000000000 | 0000 |
| 3/4" | 0.352" | 0.01" | 5/16" | 5/16" | 000000000 | 0000 |
18-8 Stainless Steel Threaded Rods
18-8 stainless steel threaded rods have good chemical resistance and may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.