Boots extend above the ankle to provide more coverage than shoes. All are water resistant.

Leather provides better cut and abrasion resistance than other materials. PVC and blended rubber are oil-resistant. Blended rubber is more durable than PVC.

6" high boots cover the ankle. 14" high boots cover most of the calf. 16" high boots are knee high.

Boots with a safety toe meet ASTM F2413 standards for protection against impact and compression. Composite safety toes are lighter than steel yet similar in strength.

Choose Style A for a traditional work boot. Made from leather, they are durable yet flexible. These boots have a soft mesh lining for breathability and antifatigue soles for all-day comfort. A composite safety toe provides the strength of steel but is lightweight. With skid-resistant soles, these boots won’t slip and slide on wet and slick surfaces. They cannot be sold outside the United States due to product restrictions.

Choose Style B for a traditional work boot in women’s sizes. They’re water resistant and made from leather for cut and abrasion resistance. A lightweight aluminum safety toe protects from impact and compression.

Style C provide knee-high coverage. Made from PVC, they are oil resistant. A steel shank provides arch support by distributing weight during strenuous work, such as climbing ladders. Boots with a safety toe are reinforced with steel for protection.

Style D have a second layer of rubber on the toe to protect against scrapes and abrasion. A steel-reinforced toe adds safety. The skid-resistant sole grips wet and slippery surfaces for good traction. Made from blended rubber, these knee-high boots are durable and oil resistant.

Style E are an economical choice made from oil-resistant PVC. Boots with a safety toe are reinforced with steel for protection.

Keep boots clean and protected in wet, dirty environments. A skid-resistant sole grips dry and wet surfaces for good traction.

Covers with snaps allow you to tighten the top with a snap. These covers are made of PVC to hold up in wet environments. Order your normal boot size unless wearing over large work boots, then order one size up.

Covers with snaps and a buckle have an adjustable strap. Tighten the strap to secure over boots. These covers are made of PVC to hold up in wet environments. Order one size up from your normal boot size.

Covers with buckles can adjust to fit multiple types of shoes. Made of blended rubber, these covers are water and abrasion resistant. 11" high covers reach mid-calf. 14" high covers are knee high.

Keep shoes clean and protected in wet, dirty environments. A skid-resistant sole grips wet and slippery surfaces for good traction.

Style A fit over athletic and work shoes.

Style B provide more coverage than Style A.

Style C have buckles to accommodate multiple types of shoes and a deep interior for shoes with a heel. They have a deep hex-tread sole for added traction.

Order your normal shoe size unless wearing over large work shoes, then order one size up.

Step into the dispenser and this plastic film clings to the bottom of your shoes and boots, so you don’t track dirt into your home or worksite. As you pull your foot out, cut the film from its roll on the serrated blade like you would with regular plastic wrap—you never touch any part with your hands, or even bend down. For moving the dispenser safely, the blade is retractable. These plastic film covers are durable enough that they won’t tear easily when you walk, but thin enough to apply multiple layers if you need extra protection or to cover film that’s dirty. Use them with any shoe size.

One roll of 1-mil. thick plastic film and one refillable plastic dispenser are included. When you run out of film, replace it with more of the same thickness or use 2-mil. thick film for extra strength and tear resistance.

These covers are ASTM F2413 rated and tested to 20,000 volts AC for protection against electrical hazards. They are knee high and made of water-resistant dielectric rubber with a fabric lining for easy removal. A skid-resistant sole grips wet and slippery surfaces for good traction. They have a deep-cut heel that locks onto ladder rungs or stair edges to stabilize the wearer when climbing. Tighten the top using the adjustable strap.

Order your normal boot size unless wearing over large work boots, then order one size up.

These covers are ASTM F2413 rated and tested to 20,000 volts AC for protection against electrical hazards. They are made of water-resistant dielectric rubber with a fabric lining for easy removal. A skid-resistant sole grips wet and slippery surfaces for good traction. They have a deep-cut heel that locks onto ladder rungs or stair edges to stabilize the wearer when climbing.

Order your normal shoe size unless wearing over large work shoes, then order one size up.

Designed to meet clean room standards, these boot covers act as a barrier between the worker and the room to prevent pollutants such as dust particles and microbes from contaminating a space. Covers are suitable for use in clean rooms rated to both Federal Standard and ISO classes. In both systems, clean rooms with lower class ratings have fewer contaminants. These covers are knee high with an elastic top and an ankle closure. A skid-resistant sole grips wet and slippery surfaces for good traction.

Tyvek polyethylene covers are soft and strong, and withstand occasional contact with mild liquids such as water and spray paint. These covers are disposable.

Polyester covers resist abrasion and splashing liquid; they’ll last longer than Tyvek polyethylene covers. These covers must be cleaned prior to first use, and are reusable for up to 100 washes when laundered to clean room standards. They have a hard rubber sole, so they can be worn without shoes.

Keep dust and other particles on your shoes from contaminating clean rooms. These covers have an elastic band that keeps them in place once they’re on. Made of lightweight fabric, they won’t weigh you down. They’re also water resistant, so your feet stay dry in wet areas.

Polyethylene and polypropylene covers are disposable. They stretch to fit over most shoes (up to men’s size 15). To keep contaminants off of your hands, apply and remove them with Dispensers and Removers for Clean Room Shoe Covers. They’re quick, hands-free, and you don’t need to bend down to use them. Polyethylene covers are best for short-term use. For long-term wear, use polypropylene covers—they’re more durable than polyethylene. They also have a skid-resistant sole that's coated to keep you from sliding on slick floors. These covers won't generate a static charge, so they're safe to use around sensitive electronic equipment.

Reusable when laundered to clean room standards, polyester covers resist abrasion and liquid splashes. They last up to 100 washes; wash them prior to first use. These covers have adjustable snaps, so you can create a secure and comfortable fit around your shoe.

Extend the life of your footwear with these abrasion- and water-resistant epoxies. Stronger and more durable than most footwear materials, these epoxies are often used to coat and repair high-wear areas prone to rips, cracks, and water exposure, such as safety toes. They permanently bond to leather, plastic, and rubber. Each cartridge includes enough epoxy to coat the toes on one pair of shoes or boots. They fully harden in 24 hours and dry with a gloss finish, which can be rubbed away for a matte finish.

These waders go up to your chest to keep you dry in deep water, mud, and sludge. They are PVC, so they resist oil. These waders have adjustable suspenders to modify the fit. All waders fit over socks. They have a safety toe and meet ASTM F2413 standards for protection against impact and compression.

Waders with a reinforced midsole protect against punctures when working around sharp objects, such as glass, nails, and scrap metal.

Inner and outer seam lengths are approximate. The outer seam length is measured from the bottom of the heel to the top of the wader.

Use these waders to stay dry when you’re in deep water, mud, and sludge. Straps are adjustable to modify the fit; loop through your belt and secure with a snap. All waders fit over socks.

PVC is oil resistant. Blended rubber is more abrasion resistant than PVC.

Waders with a safety toe meet ASTM F2413 standards for protection against impact and compression.

Waders with a shank provide arch support by distributing weight during strenuous work, such as climbing ladders.

Waders with a reinforced midsole protect against punctures when working around sharp objects, such as glass, nails, and scrap metal.

Inner and outer seam lengths are approximate and measured from the bottom of the heel to the top of the wader.