Mount Type Mount Type | Show |
|---|
|
Mount Type Mount Type | Hide |
|---|
Length Length |
|---|
Overall Height Overall Height |
|---|
Anchor Point Type Anchor Point Type |
|---|
 | Ring |
Movement Movement |
|---|
 |  |
| 180° Pivot | Rigid |
Load Securement Type Load Securement Type |
|---|
| Anchor Point |
Ring Style Ring Style |
|---|
 | D-Ring |
Capacity Capacity |
|---|
|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Base Material Base Material |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
ID ID |
|---|
Ring Material Ring Material |
|---|
|
UV Protection UV Protection |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Selecting Clamps Using Pipe, Conduit, or Tubing Trade Size
More
Multiline Plastic Routing Clamps
Organize multiple lines of pipe, tubing, or hose with a single clamp. Clamps have good chemical and UV resistance.
Clamps for ten lines have a mounting hole on the bottom of each slot and can be cut to the number of lines you need.
Use clamps with an adhesive back to mount on smooth surfaces without the need for fasteners. They can also be used with mounting fasteners for extra holding power.
For technical drawings and 3-D models, click on a part number.
ID | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Number of Lines | Inch | Metric, mm | Color | Lg. | Wd. | Ht. | Fasteners Included | Hole Dia. | Temp. Range, °F | For Use Outdoors | Each | |
Polyethylene Plastic | ||||||||||||
Adhesive Back, Screw On | ||||||||||||
| 10 | 1/4" | 6 | Black | 4" | 5/8" | 3/8" | No | 7/64" | -80° to 240° | Yes | 0000000 | 00000 |
Adhesive-Back Plastic Routing Clamps
Backed with foam adhesive tape, these clamps mount to any smooth surface—no fasteners required. They are noncorrosive, nonconductive nylon.
For technical drawings and 3-D models, click on a part number.
ID | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of Mounting Points | Inch | Metric, mm | For Pipe Size | Color | Lg. | Wd. | Ht. | Thick. | Temp. Range, °F | For Use Outdoors | Pkg. Qty. | Pkg. | |
Nylon Plastic | |||||||||||||
| 1 | 1/8" | 3 | __ | White | 1/2" | 3/8" | 3/16" | 1/16" | -20° to 150° | No | 25 | 0000000 | 000000 |
| 1 | 1/4" | 6 | __ | White | 7/8" | 1/2" | 5/16" | 1/16" | -20° to 150° | No | 25 | 0000000 | 00000 |
| 1 | 3/8" | 10 | __ | White | 1" | 5/8" | 7/16" | 1/16" | -20° to 150° | No | 25 | 0000000 | 00000 |
| 1 | 1/2" | 13 | 1/8 | White | 1 1/8" | 3/4" | 9/16" | 1/16" | -20° to 150° | No | 25 | 0000000 | 00000 |
| 2 | 1/8" | 3 | __ | White | 3/4" | 3/8" | 3/16" | 1/16" | -20° to 150° | No | 25 | 0000000 | 00000 |
| 2 | 1/4" | 6 | __ | White | 1 7/16" | 1/2" | 5/16" | 1/16" | -20° to 150° | No | 25 | 0000000 | 00000 |
| 2 | 3/8" | 10 | __ | White | 1 9/16" | 5/8" | 7/16" | 1/16" | -20° to 150° | No | 25 | 0000000 | 00000 |
| 2 | 1/2" | 13 | 1/8 | White | 1 5/8" | 3/4" | 9/16" | 1/16" | -20° to 150° | No | 25 | 0000000 | 00000 |
Pipe Cradles for Loop Hangers
Also known as pipe shields, these cradles provide additional support and prevent insulation from tearing when routing insulated pipe through loop hangers.
Adhesive-mount cradles have an adhesive strip that attaches the cradle to the pipe’s insulation.
For technical drawings and 3-D models, click on a part number.
ID | ||||||||
|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | Lg. | Wd. | Ht. | Thick. | Temp. Range, °F | Each | |
Galvanized Steel | ||||||||
Adhesive Mount | ||||||||
| 1 7/8" | 48 | 12" | 2" | 1" | 1/32" | -150° to 500° | 0000000 | 00000 |
| 2 3/8" | 60 | 12" | 2 1/2" | 1 1/4" | 1/32" | -150° to 500° | 0000000 | 0000 |
| 2 7/8" | 73 | 12" | 3" | 1 1/2" | 1/32" | -150° to 500° | 0000000 | 0000 |
| 3 1/2" | 89 | 12" | 3 1/2" | 1 3/4" | 1/32" | -150° to 500° | 0000000 | 0000 |
| 4" | 102 | 12" | 4" | 2" | 1/32" | -150° to 500° | 0000000 | 0000 |
| 4 1/2" | 114 | 12" | 4 1/2" | 2 1/4" | 1/32" | -150° to 500° | 0000000 | 0000 |
| 5" | 127 | 12" | 5" | 2 1/2" | 1/32" | -150° to 500° | 0000000 | 0000 |
| 5 9/16" | 141 | 12" | 5 1/2" | 2 3/4" | 1/32" | -150° to 500° | 0000000 | 0000 |
| 6 1/8" | 156 | 12" | 6" | 3" | 1/16" | -150° to 500° | 0000000 | 0000 |
Cable Holders
Mount to a surface to secure and route cable.
Adhesive-back cable holders mount to any clean, dry surface. Screw-in mount cable holders require a fastener.
For technical drawings and 3-D models, click on a part number.
Overall | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | For Max. Bundle Dia. | Lg. | Wd. | Ht. | For Use Outdoors | Specifications Met | Temp. Range, °F | Color | Pkg. Qty. | Pkg. | |
Nylon Plastic | |||||||||||
| A | 3/8" | 1" | 3/4" | 7/8" | No | UL 94 V-2 | -40° to 185° | Off-White | 25 | 0000000 | 000000 |
| A | 9/16" | 1 7/16" | 3/4" | 1 1/4" | No | UL 94 V-2 | -40° to 185° | Off-White | 25 | 0000000 | 00000 |
| A | 3/4" | 1 11/16" | 1" | 1 5/16" | No | UL 94 V-2 | -40° to 185° | Off-White | 25 | 0000000 | 00000 |
| A | 15/16" | 1 3/4" | 1" | 1 5/8" | No | UL 94 V-2 | -40° to 185° | Off-White | 25 | 0000000 | 00000 |
| B | 1/4" | 1/2" | 1/2" | 9/16" | No | UL 94 V-2 | -40° to 180° | Off-White | 25 | 0000000 | 0000 |
| B | 1/4" | 5/8" | 3/8" | 3/4" | No | UL 94 V-2 | -40° to 180° | Off-White | 25 | 00000000 | 0000 |
| B | 1/4" | 1" | 1/2" | 1/2" | No | UL 94 V-2 | 32° to 185° | Off-White | 25 | 0000000 | 0000 |
| B | 3/8" | 3/4" | 1/2" | 3/4" | No | UL 94 V-2 | -40° to 180° | Off-White | 25 | 00000000 | 00000 |
| C | 3/8" | 1" | 1/2" | 1 1/8" | No | UL 94 V-2 | 32° to 185° | Off-White | 25 | 00000000 | 0000 |
| C | 1/2" | 1" | 1/2" | 1 1/4" | No | UL 94 V-2 | 32° to 185° | Off-White | 25 | 00000000 | 00000 |
| C | 3/4" | 1" | 1/2" | 1 5/8" | No | UL 94 V-2 | 32° to 185° | Off-White | 25 | 00000000 | 00000 |
| D | 7/16" | 1" | 1/2" | 1 1/4" | No | UL 94 V-2 | 32° to 185° | Off-White | 50 | 00000000 | 00000 |
| D | 9/16" | 7/8" | 1/2" | 1 7/16" | No | UL 94 V-2 | 32° to 185° | Off-White | 50 | 00000000 | 00000 |
| E | 1/4" | 1" | 5/8" | 9/16" | No | UL 94 V-2 | -40° to 185° | Off-White | 25 | 0000000 | 00000 |
| K | 1/8" | 1 1/2" | 3/4" | 11/16" | No | UL 94 V-2 | -40° to 185° | Gray | 5 | 00000000 | 00000 |
| K | 1/8" | 2 1/2" | 3/4" | 11/16" | No | UL 94 V-2 | -40° to 185° | Gray | 5 | 00000000 | 00000 |
| L | 1/4" | 2 1/4" | 1" | 1/2" | No | UL 94 V-2 | -20° to 120° | Gray | 1 | 00000000 | 0000 |
| L | 1/4" | 3 3/8" | 1" | 5/8" | No | UL 94 V-2 | -20° to 120° | Gray | 1 | 00000000 | 0000 |
PVC Plastic | |||||||||||
| F | 3/8" | 1 1/16" | 1" | 7/16" | No | UL 94 V-0 | 32° to 120° | Gray | 100 | 00000000 | 00000 |
| G | 3/4" | 1 1/8" | 1" | 9/16" | No | UL 94 V-0 | 32° to 120° | Gray | 10 | 0000000 | 0000 |
| G | 1" | 1 1/2" | 1 1/4" | 13/16" | No | UL 94 V-0 | 32° to 120° | Gray | 10 | 0000000 | 00000 |
Vinyl Plastic | |||||||||||
| G | 1/4" | 1/2" | 1/2" | 7/16" | No | UL 94 V-0 | 32° to 120° | Gray | 25 | 0000000 | 0000 |
| G | 1/2" | 3/4" | 3/4" | 1/2" | No | UL 94 V-0 | 32° to 120° | Gray | 25 | 0000000 | 00000 |
| H | 1/8" | 3/4" | 3/4" | 5/16" | No | UL 94 V-0 | 32° to 120° | Gray | 25 | 0000000 | 00000 |
| H | 1/4" | 3/4" | 3/4" | 1/2" | No | UL 94 V-0 | 32° to 120° | Gray | 25 | 0000000 | 00000 |
| H | 3/8" | 3/4" | 3/4" | 5/8" | No | UL 94 V-0 | 32° to 120° | Gray | 25 | 0000000 | 00000 |
| H | 1/2" | 1" | 1" | 5/8" | No | UL 94 V-0 | 32° to 120° | Gray | 10 | 0000000 | 0000 |
Zinc-Plated Steel | |||||||||||
| J | 1/4" | 9/16" | 3/4" | 3/8" | No | __ | -20° to 120° | __ | 5 | 0000000 | 0000 |
| J | 5/8" | 3/4" | 1 3/16" | 13/16" | No | __ | -20° to 120° | __ | 5 | 0000000 | 0000 |
Adhesive-Back Hook and Loop Cable Ties
Stick these ties to any smooth, clean surface.
Style A wraps around material and attaches to itself. Style B presses closed over a bundle.
For technical drawings and 3-D models, click on a part number.
| Style | Lg. | For Max. Bundle Dia. | Wd. | Thick. | For Use Outdoors | Temp. Range, °F | Choose a Color | Each | |
Nylon Fabric | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| A | 6" | 1 1/4" | 7/8" | 0.06" | No | 40° to 110° | Black | 0000000 | 00000 |
| B | 2" | 3/4" | 5/8" | 0.12" | No | -20° to 200° | 0000000 | 0000 | |
| B | 2" | 3/4" | 1" | 0.12" | No | -20° to 200° | 0000000 | 0000 | |
| B | 4" | 1 1/2" | 5/8" | 0.12" | No | -20° to 200° | 0000000 | 0000 | |
| B | 4" | 1 1/2" | 1" | 0.12" | No | -20° to 200° | 0000000 | 0000 | |
| B | 8" | 3 1/4" | 1" | 0.12" | No | -20° to 200° | 0000000 | 0000 | |
| B | 12" | 4 1/2" | 1" | 0.12" | No | -20° to 200° | 0000000 | 0000 | |
Hook and Loop Cable Tie Mounts
Add a hook and loop cable tie to these mounts to secure a bundle.
For technical drawings and 3-D models, click on a part number.
Mountable Cable Ties
Adhesive-back mount ties stick to any clean, smooth surface and have mounting holes for screws.
Wide and extra wide ties are stronger but less flexible than our narrow and standard cable ties. Use them for heavy duty applications that require extra strength.
Adhesive-Ready Tie-Down Rings
Large holes in the base allow adhesive to flow through. It's made of 316 stainless steel for excellent resistance to salt water and chemicals.
Warning: Never use for lifting applications.
Ring | Base | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Inner Wd. | Ht. | Thick. | Style | Lg. | Wd. | Thick. | Material | Each | |
316 Stainless Steel | |||||||||
| 1/2" | 13/16" | 3/16" | Angled D-Ring | 1 1/4" | 1 1/4" | 1/16" | 316 Stainless Steel | 0000000 | 00000 |
Adhesive-Back Tie-Down Rings
Create an anchor point without drilling or welding—adhesive on the back holds this ring in place. The flexible foam rubber base mounts to curved surfaces and adheres to glass, metal, and plastic.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Ring | Base | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Inner Wd. | Style | Lg. | Wd. | Material | Adhesive Type | Reaches Full Strength, hrs. | Begins to Harden, min. | Temp. Range, °F | Each | |
Polyethylene Rope | |||||||||||
| 140 | 2 1/2" | D-Ring | 3 1/8" | 2 1/2" | EVA Foam | Acrylic | 72 | 20 | -95° to 165° | 0000000 | 000000 |
Reusable Adhesive-Back Hooks
Adhesive strips hold tight yet remove cleanly without damaging the wall.
Styles H-K have an all-metal construction for better durability than other reusable adhesive-back hooks.
For technical drawings and 3-D models, click on a part number.
Removable Adhesive-Back Plastic Hangers
These adhesive strips hold tight yet remove cleanly without damaging the wall.
Style A hangers have adhesive on both sides. They are often used with reusable adhesive-back hooks and holders. Hangers in six-strip assortments are water resistant. White and clear hangers in six-strip assortments are also UV resistant for outdoor use.
Style B hangers are hook and loop strips designed to be used as a pair: one mounts to the wall and the other to the item you’re hanging.
Overall | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Style | Strip Type | Wd. | Ht. | Capacity, lbs. | Material | Includes | Pkg. Qty. | Pkg. | |
| A | Small | 5/8" | 1 1/8" | 1 | White Plastic | __ | 20 | 0000000 | 00000 |
| A | Small | 5/8" | 1 1/8" | 1 | White Plastic | __ | 16 | 0000000 | 0000 |
| A | Small | 5/8" | 1 3/4" | 1/2 | Clear Plastic | __ | 12 | 0000000 | 0000 |
| A | Medium | 5/8" | 2" | 2 | Clear Plastic | __ | 9 | 0000000 | 0000 |
| A | Medium | 5/8" | 2" | 3 | White Plastic | __ | 9 | 0000000 | 0000 |
| A | Large | 3/4" | 2 7/8" | 5 | White Plastic | __ | 6 | 0000000 | 0000 |
| A | Assortment | __ | __ | __ | White Plastic | 2 Large (3/4" Wd. × 3 5/8" Lg.) Strips 4 Medium (5/8" Wd. × 2 3/4" Lg.) Strips | 6 | 0000000 | 0000 |
| A | Assortment | __ | __ | __ | White Plastic | 4 Large (3/4" Wd. × 2 7/8" Lg.) Strips 4 Medium (5/8" Wd. × 2" Lg.) Strips 8 Small (5/8" Wd. × 1 1/8" Lg.) Strips | 16 | 0000000 | 0000 |
| A | Assortment | __ | __ | __ | Clear Plastic | 2 Large (3/4" Wd. × 3 5/8" Lg.) Strips 4 Medium (5/8" Wd. × 2 3/4" Lg.) Strips | 6 | 0000000 | 0000 |
| A | Assortment | __ | __ | __ | Clear Plastic | 4 Large (3/4" Wd. × 3 5/8" Lg.) Strips 4 Medium (3/4" Wd. × 2 5/8" Lg.) Strips 8 Small (3/4" Wd. × 1 5/8" Lg.) Strips | 16 | 0000000 | 0000 |
| A | Assortment | __ | __ | __ | Blue Plastic | 2 Medium (3/4" Wd. × 2 5/8" Lg.) Strips 4 Large (3/4" Wd. × 3 5/8" Lg.) Strips | 6 | 0000000 | 0000 |
| B | Large | 1/2" | 3 5/8" | 4 | White Plastic | __ | 12 | 0000000 | 00000 |
Adhesive-Back Aluminum Hangers
Often used to mount mirrors, these hangers hold up to 40 lbs. They have an offset design that hides the hanger from view once mounted.
Overall | Hole | ||||||
|---|---|---|---|---|---|---|---|
| Wd. | Ht. | Wd. | Ht. | Capacity, lbs. | Material | Each | |
| 6" | 8 1/4" | 1 1/4" | 1/2" | 40 | Aluminum | 000000 | 000000 |
Adhesive-Back Cloth Hangers
Wet the cloth backing to attach these hangers to a flat surface. Use individually or as an interlocking pair: one mounts to the wall and the other to the item you’re hanging.
Overall | Hole | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | Ht. | Wd. | Ht. | Capacity, lbs. | Material | Hook Material | Pkg. Qty. | Pkg. | |
| 1 1/8" | 2 1/4" | 0.13" | 1/8" | 1 1/2 | White Cloth | Zinc-Plated Steel | 5 | 0000000 | 00000 |
Adhesive-Back DIN Rails
Stick this DIN rail in any enclosure to mount components without making screw holes that might leak. The adhesive backing and short length let you install these in tight spaces where a screwdriver wouldn’t fit. Adhesive reaches full capacity after 24 hours.
DIN rails meet UL 94 V-0, so if they catch fire, they’ll self-extinguish within 10 seconds and won’t spread the fire by dripping.
For technical drawings and 3-D models, click on a part number.