Floor-Mount Clamp-Style Supports
For a secure hold on pipe and conduit suspended above the ground, these supports have a cushioned clamp provides a 360° grip while reducing vibration. To install, add an extension pipe (not included) that is approximately 4" shorter than the desired height. Tack weld pipe to the base and support, then bolt the base to the floor. Fine-tune the overall height using the adjustment screw.
Galvanized steel supports have good corrosion resistance. 304 stainless steel supports have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
For OD | Cushion | Base | Mounting Hole | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | For Pipe Size | Cap., lbs. | For Extension Pipe Size | Adjustment Screw Ht. | Clamp Thick. | Material | Color | Lg. | Wd. | Dia. | No. of | Mounting Hardware Included | Temp. Range, °F | Each | |
Galvanized Steel | ||||||||||||||||
2 3/8" | 60 | 2 | 10,000 | 2 | 7"-10" | 3/8" | Neoprene Rubber | Black | 6" | 4" | 9/16" | 2 | No | -70° to 200° | 0000000 | 0000000 |
3 1/2" | 89 | 3 | 10,000 | 2 | 7"-10" | 3/8" | Neoprene Rubber | Black | 6" | 4" | 9/16" | 2 | No | -70° to 200° | 0000000 | 000000 |
4 1/2" | 114 | 4 | 10,000 | 2 | 7"-10" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 0000000 | 000000 |
6 5/8" | 168 | 6 | 10,000 | 2 | 7"-10" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 0000000 | 000000 |
8 5/8" | 219 | 8 | 10,000 | 2 | 7"-10" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 0000000 | 000000 |
10 3/4" | 273 | 10 | 10,000 | 2 | 7"-10" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 0000000 | 000000 |
12 3/4" | 324 | 12 | 10,000 | 2 | 7"-10" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 0000000 | 000000 |
304 Stainless Steel | ||||||||||||||||
2 3/8" | 60 | 2 | 10,000 | 2 | 7"-10" | 3/8" | Neoprene Rubber | Black | 6" | 4" | 9/16" | 2 | No | -70° to 200° | 00000000 | 000000 |
3 1/2" | 89 | 3 | 10,000 | 2 | 7"-10" | 3/8" | Neoprene Rubber | Black | 6" | 4" | 9/16" | 2 | No | -70° to 200° | 00000000 | 000000 |
4 1/2" | 114 | 4 | 10,000 | 2 | 7"-10" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 00000000 | 000000 |
6 5/8" | 168 | 6 | 10,000 | 2 | 7"-10" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 00000000 | 000000 |
8 5/8" | 219 | 8 | 10,000 | 2 | 7"-10" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 00000000 | 000000 |
10 3/4" | 273 | 10 | 10,000 | 2 | 7"-10" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 00000000 | 000000 |
12 3/4" | 324 | 12 | 10,000 | 2 | 7"-10" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 00000000 | 000000 |
Floor-Mount Saddle-Style Supports
These U-shaped supports allow access to pipe and conduit after installation. Use them to suspend pipe, tube, and conduit above the floor. To install, add an extension pipe (not included) that is approximately 4" shorter than the desired height. Tack weld pipe to the base and support, then bolt the base to the floor. Fine-tune the overall height using the adjustment screw.
Galvanized steel supports have good corrosion resistance. 304 stainless steel supports have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
For OD | Saddle | Cushion | Base | Mounting Hole | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | For Pipe Size | Cap., lbs. | For Extension Pipe Size | Adjustment Screw Ht. | Wd. | Thick. | Material | Color | Lg. | Wd. | Dia. | No. of | Mounting Hardware Included | Temp. Range, °F | Each | |
Galvanized Steel | |||||||||||||||||
2 3/8" | 60 | 2 | 10,000 | 2 | 7"-10" | 2" | 3/8" | Neoprene Rubber | Black | 6" | 4" | 9/16" | 2 | No | -70° to 200° | 0000000 | 0000000 |
2 7/8" | 73 | 2 1/2 | 10,000 | 2 | 7"-10" | 2" | 3/8" | Neoprene Rubber | Black | 6" | 4" | 9/16" | 2 | No | -70° to 200° | 0000000 | 000000 |
3 1/2" | 89 | 3 | 10,000 | 2 | 7"-10" | 2" | 3/8" | Neoprene Rubber | Black | 6" | 4" | 9/16" | 2 | No | -70° to 200° | 0000000 | 000000 |
4 1/2" | 114 | 4 | 10,000 | 2 | 7"-10" | 2" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 0000000 | 000000 |
6 5/8" | 168 | 6 | 10,000 | 2 | 7"-10" | 2" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 0000000 | 000000 |
8 5/8" | 219 | 8 | 10,000 | 2 | 7"-10" | 2" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 0000000 | 000000 |
10 3/4" | 273 | 10 | 10,000 | 2 | 7"-10" | 2" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 0000000 | 000000 |
12 3/4" | 324 | 12 | 10,000 | 2 | 7"-10" | 2" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 0000000 | 000000 |
15 1/4" | 387 | 14 | 20,000 | 3 | 10"-13" | 3" | 5/8" | Neoprene Rubber | Black | 8" | 8" | 3/4" | 4 | No | -70° to 200° | 00000000 | 000000 |
17 3/8" | 441 | 16 | 20,000 | 3 | 10"-13" | 3" | 5/8" | Neoprene Rubber | Black | 8" | 8" | 3/4" | 4 | No | -70° to 200° | 00000000 | 000000 |
19 1/2" | 495 | 18 | 30,000 | 4 | 10"-13" | 4" | 3/4" | Neoprene Rubber | Black | 8" | 8" | 3/4" | 4 | No | -70° to 200° | 00000000 | 000000 |
21 1/2" | 546 | 20 | 30,000 | 4 | 10"-13" | 4" | 3/4" | Neoprene Rubber | Black | 8" | 8" | 3/4" | 4 | No | -70° to 200° | 00000000 | 000000 |
25 3/4" | 654 | 24 | 30,000 | 4 | 10"-13" | 4" | 3/4" | Neoprene Rubber | Black | 8" | 8" | 3/4" | 4 | No | -70° to 200° | 00000000 | 000000 |
304 Stainless Steel | |||||||||||||||||
2 3/8" | 60 | 2 | 10,000 | 2 | 7"-10" | 2" | 3/8" | Neoprene Rubber | Black | 6" | 4" | 9/16" | 2 | No | -70° to 200° | 00000000 | 000000 |
3 1/2" | 89 | 3 | 10,000 | 2 | 7"-10" | 2" | 3/8" | Neoprene Rubber | Black | 6" | 4" | 9/16" | 2 | No | -70° to 200° | 00000000 | 000000 |
4 1/2" | 114 | 4 | 10,000 | 2 | 7"-10" | 2" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 00000000 | 000000 |
6 5/8" | 168 | 6 | 10,000 | 2 | 7"-10" | 2" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 00000000 | 000000 |
8 5/8" | 219 | 8 | 10,000 | 2 | 7"-10" | 2" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 00000000 | 000000 |
10 3/4" | 273 | 10 | 10,000 | 2 | 7"-10" | 2" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 00000000 | 000000 |
12 3/4" | 324 | 12 | 10,000 | 2 | 7"-10" | 2" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 00000000 | 000000 |
15 1/4" | 387 | 14 | 20,000 | 3 | 10"-13" | 3" | 5/8" | Neoprene Rubber | Black | 8" | 8" | 3/4" | 4 | No | -70° to 200° | 00000000 | 000000 |
17 3/8" | 441 | 16 | 20,000 | 3 | 10"-13" | 3" | 5/8" | Neoprene Rubber | Black | 8" | 8" | 3/4" | 4 | No | -70° to 200° | 00000000 | 000000 |
19 1/2" | 495 | 18 | 30,000 | 4 | 10"-13" | 4" | 3/4" | Neoprene Rubber | Black | 8" | 8" | 3/4" | 4 | No | -70° to 200° | 00000000 | 000000 |
25 3/4" | 654 | 24 | 30,000 | 4 | 10"-13" | 4" | 3/4" | Neoprene Rubber | Black | 8" | 8" | 3/4" | 4 | No | -70° to 200° | 00000000 | 00000000 |
Roller Supports
Support lines that expand and contract. The roller on these supports compensates for movement in your line from changing temperatures. Often used outdoors, these supports are galvanized steel to resist corrosion in wet environments. Bolt them to the floor, beams, or brackets. They can also be welded into place.
For technical drawings and 3-D models, click on a part number.
For OD | Mounting Hole | Thread | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | For Pipe Size | Cap., lbs. | Lg. | Wd. | Ht. | Roller Material | Ctr.-to-Ctr. | No. of (Dia.) | Mounting Hardware Included | Size | Lg. | Temp. Range, °F | Each | |
Galvanized Steel | |||||||||||||||
2 1/2" | 64 | 2 | 600 | 4 1/4" | 1 1/4" | 1 1/2" | Galvanized Cast Iron | 1 1/4" | 2 (3/8") | Yes | 3/8"-16 | 1 1/2" | -20° to 400° | 0000000 | 000000 |
3 5/8" | 92 | 3 | 700 | 5 3/4" | 1 1/4" | 1 3/4" | Galvanized Cast Iron | 2" | 2 (3/8") | Yes | 3/8"-16 | 1 1/2" | -20° to 400° | 0000000 | 00000 |
4 5/8" | 117 | 4 | 750 | 6 11/16" | 1 1/2" | 2 5/16" | Galvanized Cast Iron | 2" | 2 (1/2") | Yes | 1/2"-13 | 1 1/2" | -20° to 400° | 0000000 | 00000 |
6 3/4" | 171 | 6 | 1,070 | 9 7/8" | 2" | 2 3/4" | Galvanized Cast Iron | 3 1/8" | 2 (1/2") | Yes | 1/2"-13 | 1 1/2" | -20° to 400° | 0000000 | 00000 |
8 3/4" | 222 | 8 | 1,350 | 12 1/8" | 2" | 3" | Galvanized Cast Iron | 3 3/8" | 2 (5/8") | Yes | 5/8"-11 | 1 1/2" | -20° to 400° | 0000000 | 000000 |
11" | 279 | 10 | 1,730 | 14 3/8" | 2" | 3 5/8" | Galvanized Cast Iron | 5 1/4" | 2 (5/8") | Yes | 5/8"-11 | 2" | -20° to 400° | 0000000 | 000000 |
12 7/8" | 327 | 12 | 2,400 | 16 1/2" | 2" | 4 1/8" | Galvanized Cast Iron | 5 1/2" | 2 (5/8") | Yes | 5/8"-11 | 2" | -20° to 400° | 0000000 | 000000 |
14 1/4" | 362 | 14 | 3,130 | 18 1/4" | 2 1/2" | 4 11/16" | Galvanized Cast Iron | 6 1/2" | 2 (3/4") | Yes | 3/4"-10 | 2" | -20° to 400° | 0000000 | 000000 |
16 1/4" | 413 | 16 | 3,970 | 20 1/2" | 3" | 5 3/8" | Galvanized Cast Iron | 8 1/4" | 2 (3/4") | Yes | 3/4"-10 | 2 1/2" | -20° to 400° | 0000000 | 000000 |
Floor-Mount Flange-Style Supports
Bolt these supports directly to a pipe flange to suspend a run of pipe above the floor. Unlike clamps and hangers, which fasten to walls and ceilings, these supports mount to the ground. To install, add an extension pipe (not included) that is approximately 4" shorter than the desired height. Tack weld pipe to the base and support, then bolt the base to the floor. Fine-tune the overall height using the adjustment screw.
Galvanized steel supports have good corrosion resistance. 304 stainless steel supports have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
For OD | Flange Plate | Base | Mounting Hole | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | For Flange ANSI Class | For Pipe Size | Cap., lbs. | For Extension Pipe Size | Adjustment Screw Ht. | Hole Ctr.-to-Ctr. | Hole Dia. | Lg. | Wd. | Dia. | No. of | Mounting Hardware Included | Each | |
Galvanized Steel | |||||||||||||||
2 3/8" | 60 | 125 | 2 | 10,000 | 2 | 7"-10" | 3 3/8" | 3/4" | 6" | 4" | 9/16" | 2 | No | 0000000 | 0000000 |
3 1/2" | 89 | 125 | 3 | 10,000 | 2 | 7"-10" | 4 1/4" | 3/4" | 6" | 4" | 9/16" | 2 | No | 0000000 | 000000 |
4 1/2" | 114 | 125 | 4 | 10,000 | 2 | 7"-10" | 2 7/8" | 3/4" | 6" | 4" | 9/16" | 2 | No | 0000000 | 000000 |
6 5/8" | 168 | 125 | 6 | 10,000 | 2 | 7"-10" | 3 5/8" | 7/8" | 6" | 4" | 9/16" | 2 | No | 0000000 | 000000 |
8 5/8" | 219 | 125 | 8 | 10,000 | 2 | 7"-10" | 4 1/2" | 7/8" | 6" | 4" | 9/16" | 2 | No | 0000000 | 000000 |
10 3/4" | 273 | 125 | 10 | 10,000 | 2 | 7"-10" | 3 11/16" | 1" | 6" | 4" | 9/16" | 2 | No | 0000000 | 000000 |
12 3/4" | 324 | 125 | 12 | 10,000 | 2 | 7"-10" | 4 3/8" | 1" | 6" | 4" | 9/16" | 2 | No | 0000000 | 000000 |
304 Stainless Steel | |||||||||||||||
2 3/8" | 60 | 125 | 2 | 10,000 | 2 | 7"-10" | 3 3/8" | 3/4" | 6" | 4" | 9/16" | 2 | No | 00000000 | 000000 |
3 1/2" | 89 | 125 | 3 | 10,000 | 2 | 7"-10" | 4 1/4" | 3/4" | 6" | 4" | 9/16" | 2 | No | 00000000 | 000000 |
4 1/2" | 114 | 125 | 4 | 10,000 | 2 | 7"-10" | 2 7/8" | 3/4" | 6" | 4" | 9/16" | 2 | No | 00000000 | 000000 |
6 5/8" | 168 | 125 | 6 | 10,000 | 2 | 7"-10" | 3 5/8" | 7/8" | 6" | 4" | 9/16" | 2 | No | 00000000 | 000000 |
8 5/8" | 219 | 125 | 8 | 10,000 | 2 | 7"-10" | 4 1/2" | 7/8" | 6" | 4" | 9/16" | 2 | No | 00000000 | 000000 |
10 3/4" | 273 | 125 | 10 | 10,000 | 2 | 7"-10" | 3 11/16" | 1" | 6" | 4" | 9/16" | 2 | No | 00000000 | 000000 |
12 3/4" | 324 | 125 | 12 | 10,000 | 2 | 7"-10" | 4 3/8" | 1" | 6" | 4" | 9/16" | 2 | No | 00000000 | 000000 |
Floor-Mount Cylinder Racks
Racks | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting Holes | Replacement Chains | |||||||||||||
For Max. Number of Cylinders | For Cylinder Dia. | Wd. | Ht. | Dp. | Color | No. of | Dia. | Mounting Fasteners Included | Specifications Met | Flammability Rating | Includes | Each | Each | ||
Powder-Coated Steel with Steel Chain | |||||||||||||||
1 | 8"-12" | 16" | 30" | 16" | Black | 3 | 17/32" | Yes | OSHA Compliant 29 CFR 1910.253, Fasteners Meet IBC (International Building Code) 2015 | NFPA 1 | Seismic Anchor | 0000000 | 0000000 | 00000000 | 000000 |
2 | 8"-12" | 30" | 30" | 16" | Black | 3 | 17/32" | Yes | OSHA Compliant 29 CFR 1910.253, Fasteners Meet IBC (International Building Code) 2015 | NFPA 1 | Seismic Anchor | 0000000 | 00000000 | 00000000 | 00000 |
3 | 8"-12" | 44" | 30" | 16" | Black | 4 | 17/32" | Yes | OSHA Compliant 29 CFR 1910.253, Fasteners Meet IBC (International Building Code) 2015 | NFPA 1 | Seismic Anchor | 0000000 | 00000000 | 00000000 | 00000 |
4 | 4"-12" | 30" | 30" | 26" | Black | 6 | 17/32" | Yes | OSHA Compliant 29 CFR 1910.253, Fasteners Meet IBC (International Building Code) 2015 | NFPA 1 | Seismic Anchor | 0000000 | 00000000 | 00000000 | 00000 |
6 | 8"-12" | 44" | 30" | 26" | Black | 4 | 17/32" | Yes | OSHA Compliant 29 CFR 1910.253, Fasteners Meet IBC (International Building Code) 2015 | NFPA 1 | Seismic Anchor | 0000000 | 00000000 | 00000000 | 00000 |
8 | 4"-12" | 58" | 30" | 26" | Black | 10 | 17/32" | Yes | OSHA Compliant 29 CFR 1910.253, Fasteners Meet IBC (International Building Code) 2015 | NFPA 1 | Seismic Anchor | 0000000 | 00000000 | 00000000 | 00000 |
10 | 8"-12" | 70" | 30" | 26" | Black | 12 | 17/32" | Yes | OSHA Compliant 29 CFR 1910.253, Fasteners Meet IBC (International Building Code) 2015 | NFPA 1 | Seismic Anchor | 0000000 | 00000000 | 00000000 | 00000 |
12 | 8"-12" | 58" | 30" | 38" | Black | 10 | 17/32" | Yes | OSHA Compliant 29 CFR 1910.253, Fasteners Meet IBC (International Building Code) 2015 | NFPA 1 | Seismic Anchor | 0000000 | 00000000 | 00000000 | 00000 |
16 | 8"-12" | 58" | 30" | 50" | Black | 10 | 17/32" | Yes | OSHA Compliant 29 CFR 1910.253, Fasteners Meet IBC (International Building Code) 2015 | NFPA 1 | Seismic Anchor | 0000000 | 00000000 | 00000000 | 00000 |
Racks | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting Holes | Replacement Straps | ||||||||||||
For Max. Number of Cylinders | For Cylinder Dia. | Wd. | Ht. | Dp. | Color | Strap Wd. | No. of | Dia. | Mounting Fasteners Included | Specifications Met | Each | Each | ||
Powder-Coated Steel with Fabric Strap | ||||||||||||||
3 | 4"-12" | 40" | 30" | 11" | Gray | 1 1/2" | 4 | 13/32" | No | OSHA Compliant 29 CFR 1910.253 | 0000000 | 0000000 | 00000000 | 000000 |
4 | 4"-12" | 32" | 30" | 23" | Gray | 1 1/2" | 4 | 13/32" | No | OSHA Compliant 29 CFR 1910.253 | 0000000 | 000000 | 00000000 | 00000 |
6 | 4"-12" | 44" | 30" | 23" | Gray | 1 1/2" | 4 | 13/32" | No | OSHA Compliant 29 CFR 1910.253 | 0000000 | 000000 | 00000000 | 00000 |
8 | 4"-12" | 56" | 30" | 23" | Gray | 1 1/2" | 4 | 13/32" | No | OSHA Compliant 29 CFR 1910.253 | 0000000 | 000000 | 00000000 | 00000 |
Racks | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting Holes | Replacement Straps | |||||||||||||
For Max. Number of Cylinders | For Cylinder Dia. | Wd. | Ht. | Dp. | Color | Strap Wd. | No. of | Dia. | Mounting Fasteners Included | Specifications Met | Flammability Rating | Each | Each | ||
Powder-Coated Steel with Fabric Strap and Bar | |||||||||||||||
1 | 4"-10" | 16" | 15" | 16" | Gray | 1 1/2" | 3 | 13/32" | No | OSHA Compliant 29 CFR 1910.253 | NFPA 1 | 0000000 | 0000000 | 00000000 | 000000 |
Support Arms
Suspend tools to keep them out of the way but still within reach. Attaching brackets slide along the length of the arm.
Floor-mount and wall-mount arms include a trolley to support hose and cable.
For technical drawings and 3-D models, click on a part number.
Base | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Projection | Overall Ht. | Max. Load Capacity, lbs. | Material | Lg. | Wd. | Mount Type | No.of Mounting Holes | Mounting Hole Dia. | Mounting Fasteners Included | Attaching End Mount Type | Features | Each | |
In/Out, Rotate, Side-to-Side | |||||||||||||
Floor Mount | |||||||||||||
36" | 108" | 30 | Powder-Coated Steel | 6" | 5" | Screw On | 4 | 1/2" | No | Bracket | Hose/Cable Trolley | 00000000 | 000000000 |
72" | 108" | 50 | Powder-Coated Steel | 6" | 6" | Screw On | 4 | 1/2" | No | Bracket | Hose/Cable Trolley | 00000000 | 00000000 |
Mounting Brackets for Medium Duty and
Heavy Duty Automatic-Winding Hose Reels
Floor-mount brackets swivel 345°.
For technical drawings and 3-D models, click on a part number.
Mounting | ||||||||
---|---|---|---|---|---|---|---|---|
For Base Lg. | For Base Wd. | Fasteners Included | No. of Holes | Hole Dia. | Material | Swivel Angle | Each | |
Floor-Mount | ||||||||
6" 9" | 6" 8" | No | 4 | 1/2" | Steel | 345° | 0000000 | 000000 |
Positioning Slides for Universal Robots
Shown with Robot Arm (Not Included) | |
Extend the horizontal reach of your Universal Robots’ arm to operate your robot at multiple positions along an assembly line, or transport workpieces from a conveyor to your CNC. All of these slides have a carriage, slide controller, and software plug-in for connecting, operating, and programming your robot’s arm. The slides become an extension of the arm, so you can program how they glide back and forth on the rail as part of the robot's work cycle. A cable management system keeps your cables from tangling while the slides are in motion.
These slides are all Universal Robots+ (UR+) certified products, and have been validated by Universal Robots for compatibility and simple integration with UR robot arms. Pair them with Telescoping Bases for Universal Robots to also extend the vertical reach of your robot’s arm.
For technical drawings and 3-D models, click on a part number.
Overall | Carriage | Load Capacity, lbs. | Robot Mount. Location | Floor Mount. Location | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg., mm | Wd., mm | Ht., mm | Travel Lg., mm | Position Accuracy, mm | Lg., mm | Wd., mm | Dynamic | Static | Mount. Hole Dia. (No. of Holes) | Mount. Fasteners Included | Mount. Hole Dia. (No. of Holes) | Mount. Fasteners Included | Includes | Each | |
For UR3e, UR5e, UR10e, UR16e Series | |||||||||||||||
Aluminum | |||||||||||||||
1,245 | 150 | 190 | 700 | ±0.1 | 170 | 200 | 2,450 | 2,700 | 6mm, 8mm (4) | Yes | 6mm (10) | No | Slide Controller, Software Plug-In for Universal Robots | 0000000 | 0000000000 |
1,550 | 150 | 190 | 1,000 | ±0.1 | 170 | 200 | 2,450 | 2,700 | 6mm, 8mm (4) | Yes | 6mm (10) | No | Slide Controller, Software Plug-In for Universal Robots | 0000000 | 000000000 |
1,855 | 150 | 190 | 1,300 | ±0.1 | 170 | 200 | 2,450 | 2,700 | 6mm, 8mm (4) | Yes | 6mm (10) | No | Slide Controller, Software Plug-In for Universal Robots | 0000000 | 000000000 |
2,160 | 150 | 190 | 1,600 | ±0.1 | 170 | 200 | 2,450 | 2,700 | 6mm, 8mm (4) | Yes | 6mm (10) | No | Slide Controller, Software Plug-In for Universal Robots | 0000000 | 000000000 |
2,337 | 150 | 190 | 1,800 | ±0.1 | 170 | 200 | 2,450 | 2,700 | 6mm, 8mm (4) | Yes | 6mm (10) | No | Slide Controller, Software Plug-In for Universal Robots | 0000000 | 000000000 |
Telescoping Bases for Universal Robots
Take your Universal Robots arm to new heights—these bases move up and down to extend your robot’s vertical reach for high and low stacking jobs. Often used for loading boxes off a conveyor, they start at ground level and reach higher as they need to stack boxes on top of each other. The bases have a mounting plate, base controller, and software plug-in for connecting, operating, and programming your arm. They become an extension of the arm, so you can program how they move as part of the robot's work cycle. Use the threaded holes on the bases and mounting plate to attach accessories, such as a cable management system.
These bases are all Universal Robots+ (UR+) certified products, and have been validated by Universal Robots for compatibility and simple integration with UR robot arms. Pair these bases with Positioning Slides for Universal Robots to also extend the horizontal reach of your robot’s arm.
For technical drawings and 3-D models, click on a part number.
Overall | Load Capacity, lbs. | Robot Mount. Location | Floor Mount. Location | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg., mm | Wd., mm | Ht. When Retracted, mm | Ht. When Extended, mm | Travel Height | Position Accuracy, mm | Dynamic | Static | Mount. Hole Dia. (No. of Holes) | Mount. Fasteners Included | Mount. Hole Dia. (No. of Holes) | Mount. Fasteners Included | Includes | Each | |
For UR3, UR3e, UR5, UR5e, UR10, UR10e, UR16, UR16e Series | ||||||||||||||
Aluminum | ||||||||||||||
200 | 200 | 525 | 1,025 | 500mm | ±1 | 325 | 325 | 6 mm (4), 8 mm (8) | Yes | 6.6 mm (8) | No | Base Controller, Software Plug-In for Universal Robots | 0000000 | 000000000 |
200 | 200 | 725 | 1,625 | 900mm | ±1 | 325 | 325 | 6 mm (4), 8 mm (8) | Yes | 6.6 mm (8) | No | Base Controller, Software Plug-In for Universal Robots | 0000000 | 00000000 |