Brady BMP21 Label Printer Tape
Nylon label tape is designed for marking wires and cables on terminal blocks.
Print on heat-shrink tubing and then slide it over wires that are open on one end. When heat is applied, the tubing conforms to the wire for a tight fit.
| Manufacturer Model Number | Wd. | Thick. | Roll Lg., ft. | Color | Message Color | Mount Type | Material | Temp. Range, °F | Each | |
| M21-250-595-WT | 1/4" | 0.004" | 21 | White | Black | Adhesive Back | Vinyl Plastic | -40° to 180° | 0000000 | 000000 |
| M21-250-595-YL | 1/4" | 0.004" | 21 | Yellow | Black | Adhesive Back | Vinyl Plastic | -40° to 180° | 0000000 | 00000 |
| M21-375-499-TB | 3/8" | 0.007" | 16 | White | Black | Adhesive Back | Nylon Fabric | -40° to 290° | 0000000 | 00000 |
| M21-375-595-BK | 3/8" | 0.004" | 21 | Black | White | Adhesive Back | Vinyl Plastic | -40° to 180° | 0000000 | 00000 |
| M21-375-595-WT | 3/8" | 0.004" | 21 | White | Black | Adhesive Back | Vinyl Plastic | -40° to 180° | 0000000 | 00000 |
| M21-375-595-YL | 3/8" | 0.004" | 21 | Yellow | Black | Adhesive Back | Vinyl Plastic | -40° to 180° | 0000000 | 00000 |
| M21-500-499-TB | 1/2" | 0.007" | 16 | White | Black | Adhesive Back | Nylon Fabric | -40° to 290° | 0000000 | 00000 |
| M21-500-595-BK | 1/2" | 0.004" | 21 | Black | White | Adhesive Back | Vinyl Plastic | -40° to 180° | 0000000 | 00000 |
| M21-500-595-WT | 1/2" | 0.004" | 21 | White | Black | Adhesive Back | Vinyl Plastic | -40° to 180° | 0000000 | 00000 |
| M21-500-595-YL | 1/2" | 0.004" | 21 | Yellow | Black | Adhesive Back | Vinyl Plastic | -40° to 180° | 0000000 | 00000 |
| M21-750-595-BK | 3/4" | 0.004" | 21 | Black | White | Adhesive Back | Vinyl Plastic | -40° to 180° | 0000000 | 00000 |
| M21-750-595-WT | 3/4" | 0.004" | 21 | White | Black | Adhesive Back | Vinyl Plastic | -40° to 180° | 0000000 | 00000 |
| M21-750-595-YL | 3/4" | 0.004" | 21 | Yellow | Black | Adhesive Back | Vinyl Plastic | -40° to 180° | 0000000 | 00000 |
| Manufacturer Model Number | Wd. | For Wire Gauge  | For Wire OD | Thick. | Roll Lg., ft. | Color | Message Color | Mount Type | Material | Temp. Range, °F | Each | |
| M21-125-C-342 | 1/8" | 22-16 | 0.05"-0.11" | 0.02" | 7 | White | Black | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 000000 |
| M21-125-C-342-YL | 1/8" | 22-16 | 0.05"-0.11" | 0.02" | 7 | Yellow | Black | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 00000 |
| M21-187-C-342 | 3/16" | 20-10 | 0.06"-0.15" | 0.02" | 7 | White | Black | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 00000 |
| M21-187-C-342-YL | 3/16" | 20-10 | 0.06"-0.15" | 0.02" | 7 | Yellow | Black | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 00000 |
| M21-250-C-342 | 1/4" | 16-8 | 0.09"-0.22" | 0.025" | 7 | White | Black | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 00000 |
| M21-250-C-342-YL | 1/4" | 16-8 | 0.09"-0.22" | 0.025" | 7 | Yellow | Black | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 00000 |
| M21-375-C-342 | 3/8" | 12-4 | 0.13"-0.32" | 0.025" | 7 | White | Black | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 00000 |
| M21-375-C-342-YL | 3/8" | 12-4 | 0.13"-0.32" | 0.025" | 7 | Yellow | Black | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 00000 |
Brady M710 Label Printer Tape
Print on heat-shrink tubing and then slide it over wires that are open on one end. When heat is applied, the tubing conforms to the wire for a tight fit.
| Manufacturer Model Number | Wd. | Thick. | Roll Lg., ft. | Color | Mount Type | Material | Temp. Range, °F | Each | |
| M7C-500-595-WT | 1/2" | 0.004" | 50 | White | Adhesive Back | Vinyl Plastic | -40° to 180° | 00000000 | 000000 |
| M7C-500-595-YL | 1/2" | 0.004" | 50 | Yellow | Adhesive Back | Vinyl Plastic | -40° to 180° | 0000000 | 00000 |
| M7C-1000-595-WT | 1" | 0.004" | 50 | White | Adhesive Back | Vinyl Plastic | -40° to 180° | 00000000 | 00000 |
| M7C-1000-595-YL | 1" | 0.004" | 50 | Yellow | Adhesive Back | Vinyl Plastic | -40° to 180° | 00000000 | 00000 |
| M7C-2000-595-WT | 2" | 0.004" | 50 | White | Adhesive Back | Vinyl Plastic | -40° to 180° | 00000000 | 000000 |
| M7C-2000-595-YL | 2" | 0.004" | 50 | Yellow | Adhesive Back | Vinyl Plastic | -40° to 180° | 0000000 | 000000 |
For Wire | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer Model Number | Wd. | Gauge | OD | Thick. | Roll Lg., ft. | Color | Mount Type | Material | Temp. Range, °F | Each | |
| M7-125-1-342 | 1" | 22-16 | 0.05"-0.11" | 0.02" | 8 | White | Wraparound | Polyolefin Plastic | -65° to 275° | 0000000 | 000000 |
| M7-125-1-342-YL | 1" | 22-16 | 0.05"-0.11" | 0.02" | 8 | Yellow | Wraparound | Polyolefin Plastic | -65° to 275° | 00000000 | 00000 |
| M7-187-1-342-YL | 1" | 20-10 | 0.06"-0.15" | 0.02" | 8 | Yellow | Wraparound | Polyolefin Plastic | -65° to 275° | 00000000 | 00000 |
| M7-187-1-342 | 1" | 20-10 | 0.06"-0.15" | 0.02" | 8 | White | Wraparound | Polyolefin Plastic | -65° to 275° | 00000000 | 00000 |
| M7-250-1-342-YL | 1" | 16-8 | 0.09"-0.22" | 0.025" | 8 | Yellow | Wraparound | Polyolefin Plastic | -65° to 275° | 00000000 | 00000 |
| M7-250-1-342 | 1" | 16-8 | 0.09"-0.22" | 0.025" | 8 | White | Wraparound | Polyolefin Plastic | -65° to 275° | 00000000 | 00000 |
| M7-375-1-342 | 1" | 12-4 | 0.13"-0.32" | 0.025" | 8 | White | Wraparound | Polyolefin Plastic | -65° to 275° | 00000000 | 000000 |
| M7-375-1-342-YL | 1" | 12-4 | 0.13"-0.32" | 0.025" | 8 | Yellow | Wraparound | Polyolefin Plastic | -65° to 275° | 0000000 | 000000 |
Brady M4/M5 Label Printer Tape
Create labels using your Brady M4 or M5 printer.
Aggressive adhesive sticks to nearly any surface, including concrete and other porous materials. It holds up in oily, dirty, or damp areas, and it stays put even with heavy use or regular cleaning. However, it’s more difficult to remove from surfaces than standard adhesives. Low-residue adhesive doesn’t leave a mess behind when you remove the label, so cleanup is easy. It’s best for temporarily labeling items, since it won’t stand up to heavy wear.
Vinyl labels are UV resistant, so you can use them outdoors. Polyester labels hold up to dirt, oil, and cleaning better than vinyl. Paper labels dissolve completely in water—including the adhesive—so you can wash them off. Use them on items that are frequently cleaned and relabeled, such as test tubes or food service containers.
| Wd. | Color | Manufacturer Model No. | For Printer Series | Thick. | Roll Lg., ft. | Temp. Range, °F | Each | |
Aggressive Adhesive Back | ||||||||
|---|---|---|---|---|---|---|---|---|
Vinyl Plastic | ||||||||
| 1/4" | White | M4C-250-595-WT-BK | M4, M5 | 0.004" | 25 | -40° to 180° | 0000000 | 000000 |
| 1/4" | Yellow | M4C-250-595-YL-BK | M4, M5 | 0.004" | 25 | -40° to 180° | 0000000 | 00000 |
| 3/8" | White | M4C-375-595-WT-BK | M4, M5 | 0.004" | 25 | -40° to 180° | 0000000 | 00000 |
| 3/8" | Yellow | M4C-375-595-YL-BK | M4, M5 | 0.004" | 25 | -40° to 180° | 0000000 | 00000 |
| 1/2" | White | M4C-500-595-WT-BK | M4, M5 | 0.004" | 25 | -40° to 180° | 0000000 | 00000 |
| 1/2" | Yellow | M4C-500-595-YL-BK | M4, M5 | 0.004" | 25 | -40° to 180° | 0000000 | 00000 |
| 3/4" | White | M4C-750-595-WT-BK | M4, M5 | 0.004" | 25 | -40° to 180° | 0000000 | 00000 |
| 3/4" | Yellow | M4C-750-595-YL-BK | M4, M5 | 0.004" | 25 | -40° to 180° | 0000000 | 00000 |
| 1" | White | M4C-1000-595-WT-BK | M4, M5 | 0.004" | 25 | -40° to 180° | 0000000 | 00000 |
| 1" | Yellow | M4C-1000-595-YL-BK | M4, M5 | 0.004" | 25 | -40° to 180° | 0000000 | 00000 |
| 1 1/2" | White | M5C-1500-595-WT-BK | M5 | 0.004" | 25 | -40° to 180° | 0000000 | 00000 |
| 1 1/2" | Yellow | M5C-1500-595-YL-BK | M5 | 0.004" | 25 | -40° to 180° | 0000000 | 00000 |
Polyester Plastic | ||||||||
| 3/8" | White | M4C-375-422 | M4, M5 | 0.004" | 25 | -40° to 210° | 0000000 | 00000 |
| 1/2" | White | M4C-500-422 | M4, M5 | 0.004" | 25 | -40° to 210° | 0000000 | 00000 |
| 5/8" | White | M4C-625-422 | M4, M5 | 0.004" | 25 | -40° to 210° | 0000000 | 00000 |
| 1" | White | M4C-1000-422 | M4, M5 | 0.004" | 25 | -40° to 210° | 0000000 | 00000 |
| 1 1/2" | White | M5C-1500-422 | M5 | 0.004" | 25 | -40° to 210° | 0000000 | 00000 |
Low-Residue Adhesive Back | ||||||||
Vinyl Plastic | ||||||||
| 1" | White | M4C-1000-581-WT | M4, M5 | 0.005" | 25 | -40° to 180° | 0000000 | 00000 |
| 1 1/2" | White | M5C-1500-581-WT | M5 | 0.005" | 25 | -40° to 180° | 0000000 | 00000 |
Water-Soluble Adhesive Back | ||||||||
Paper | ||||||||
| 3/4" | White | M4C-750-403 | M4, M5 | 0.003" | 25 | -90° to 210° | 0000000 | 00000 |
| 1 1/2" | White | M5C-1500-403 | M5 | 0.003" | 25 | -90° to 210° | 0000000 | 00000 |
Brady BMP41/BMP51/BMP53/M511 Label Printer Tape
Create labels for cable and wire using your Brady printer. This printer tape is heat-shrink tubing, so after printing on it, slide the label over an open end of your wire and apply heat to make it fit tightly.
| Manufacturer Model Number | Wd. | For Wire Gauge | For Wire OD | Thick. | Roll Lg., ft. | Color | Message Color | Mount Type | Material | Temp. Range, °F | Each | |
Heat-Shrink Tubing | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For BMP41, BMP51, and BMP53 Printer Models | ||||||||||||
| M4-125-075-342 | 3/4" | 22-16 | 0.05"-0.11" | 0.02" | 5 | White | Black | Wraparound | Polyolefin Plastic | -60° to 275° | 0000000 | 000000 |
| M4-375-075-342 | 3/4" | 12-4 | 0.13"-0.32" | 0.025" | 5 | White | Black | Wraparound | Polyolefin Plastic | -60° to 275° | 0000000 | 000000 |
For BMP41, BMP51, BMP53 and M511 Printer Models | ||||||||||||
| M4-187-075-342 | 3/4" | 20-10 | 0.06"-0.15" | 0.02" | 5 | White | Black | Wraparound | Polyolefin Plastic | -60° to 275° | 0000000 | 00000 |
| M4-250-075-342 | 3/4" | 16-8 | 0.09"-0.22" | 0.025" | 5 | White | Black | Wraparound | Polyolefin Plastic | -60° to 275° | 0000000 | 00000 |
For BMP51 and BMP53 Printer Models | ||||||||||||
| M5-125-1-342 | 1" | 22-16 | 0.05"-0.11" | 0.02" | 6 | White | Black | Wraparound | Polyolefin Plastic | -60° to 275° | 0000000 | 00000 |
| M5-187-1-342 | 1" | 20-10 | 0.06"-0.15" | 0.02" | 6 | White | Black | Wraparound | Polyolefin Plastic | -60° to 275° | 0000000 | 00000 |
| M5-375-1-342 | 1" | 12-4 | 0.13"-0.32" | 0.025" | 6 | White | Black | Wraparound | Polyolefin Plastic | -60° to 275° | 0000000 | 000000 |
For BMP51, BMP53 and M511 Printer Models | ||||||||||||
| M5-250-1-342 | 1" | 16-8 | 0.09"-0.22" | 0.025" | 6 | White | Black | Wraparound | Polyolefin Plastic | -60° to 275° | 0000000 | 00000 |
Brady Washdown Label Printer Tape
Often used in plants that produce food or pharmaceuticals, this tape will retain your message even with regular power washing. Run it through your Brady M7-series printer to create custom labels. The aggressive adhesive will stick to rough, oily, dirty, or damp surfaces, and it won’t dissolve during cleaning. However, it’s more difficult to remove from surfaces than standard adhesives. Pair this tape with a compatible printer ink ribbon (sold separately).
Metal-detectable tape has a metal additive that sets off metal detectors if any part of a label falls into your line.
Tape | Printer Ink Ribbons | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer Model No. | Wd. | Thick. | Roll Lg., ft. | Color | Mount Type | Performance | Temp. Range, °F | Each | Each | ||
Polyester Plastic | |||||||||||
For M7 Series Printers | |||||||||||
| BM7C-1000-855-WT | 1" | 0.007" | 75 | White | Adhesive Back | Aggressive Adhesion | -40° to 230° | 0000000 | 0000000 | 0000000 | 000000 |
| BM7C-2000-855-WT | 2" | 0.007" | 75 | White | Adhesive Back | Aggressive Adhesion | -40° to 230° | 0000000 | 000000 | 0000000 | 00000 |
Metal-Detectable Polyester Plastic | |||||||||||
For M7 Series Printers | |||||||||||
| BM7C-1000-854-WT | 1" | 0.009" | 75 | White | Adhesive Back | Aggressive Adhesion | -40° to 230° | 0000000 | 000000 | 0000000 | 00000 |
| BM7C-2000-854-WT | 2" | 0.009" | 75 | White | Adhesive Back | Aggressive Adhesion | -40° to 230° | 0000000 | 000000 | 0000000 | 00000 |