An anodized coating forms a bond with the aluminum surface to improve wear and corrosion resistance.

The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

The anodized coating on these 90° angles forms a bond with the aluminum surface to improve wear and corrosion resistance.

An anodized coating on these U-channels forms a bond with the aluminum surface to improve wear and corrosion resistance.

Originally developed for aircraft frames, uses for 7075 aluminum now include a wide range of high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.

5086 aluminum is used on ships, oil rigs, tanks, and pressure vessels because of its excellent saltwater resistance and formability.

These 90° angles are zinc galvanized for good corrosion resistance.

With the highest lead content of all the brass alloys, 360 offers the best machinability. Often called free-machining and free-cutting brass, it stands up to high-speed drilling, milling, and tapping operations with minimal wear on your tools. It’s commonly used for gears, pinions, and lock components.

With the highest lead content of all the brass alloys, 360 offers the best machinability. Often called free-machining and free-cutting brass, it stands up to high-speed drilling, milling, and tapping operations with minimal wear on your tools. It’s commonly used for gears, pinions, and lock components.

One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints.

The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.

The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.

The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.

Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.

Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.

353 brass is more formable than 385 brass while maintaining good machinability. Commonly called engraver’s brass, it’s well suited for fabrication processes such as knurling and threading. Use it to make nuts, gears, drawer pulls, and hinges.

Polished on one side to a reflective, mirror-like finish.

A lead-free alternative to 485 brass, 464 brass offers good weldability, strength, and wear resistance. It’s widely used for marine hardware, pump and propeller shafts, and rivets.

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's commonly known as Lexan, Hyzod, Tuffak, and Makrolon.

Because PVC resists acids and alkalies, it is often used in tanks and chemical-processing applications where visibility is essential.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

Offering excellent arc and track resistance, this GPO3 fiberglass is often used for electrical applications in humid environments.

Lighter than aluminum while remaining rigid, these angles are often used as brackets in structural framing, machinery, and robotics.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94V0 for flame retardance.

Keep shim stock in a variety of thicknesses on hand with these sets. Cut into custom shapes to fit your application.

Cut this shim stock into custom shapes to fit your application. Stock is made of layers of material bonded with adhesive; remove layers with a utility knife until you get the thickness you need.

These metric brass threaded rods are corrosion resistant in wet environments, electrically conductive, and nonmagnetic.

Create a custom shim to fit your application.

Seal and cushion corners with these 90° angles.

FDA compliant and NSF/ANSI 51 certified, these 90° angles are approved for direct contact with food.

Resistant to sunlight, ozone, and water, these 90° angles are good for sealing and cushioning corners.

These tags have a large hole for easy hanging. Also known as miners' checks.

Metal tags are more durable than plastic tags.

Metal tags are more durable than plastic tags.

Characters are stamped and filled with black enamel, or engraved to reveal a contrasting color.

Specify a starting number. Embossing produces raised characters similar to a license plate. This is useful in washdown applications where engraved or stamped impressions may fill with water or wear away.

Specify a starting number. Characters are imprinted and filled with black enamel for contrast.

Characters are imprinted and filled with black enamel for contrast.

Maximize flow when straining your liquid process lines—material passes more quickly through this wire cloth's rectangular openings than through other wire cloth.

Connect float valve bodies and floats with these rods.