Clean, polish, and protect aluminum, brass, copper, chrome, and stainless steel with this polish. It removes oxidation, tarnish, and surface rust without scratching or dulling brushed finishes.

Polish molds, dies, fixtures, and molded materials. This polish removes plate-out, oxidation, and stains.

Clean rust and lime deposits such as calcium and scale from HVAC systems, coolers, tools, and vehicles.

Designed to be used together to improve the performance of electrical connections, cleaners remove oxidation and corrosion on connections while sealants coat them to prevent oxidation and corrosion.

Chill individual electronic components on a circuit board to troubleshoot one circuit at a time.

Apply to electrical connections such as switches and lugs to prevent corrosion, enhance conductivity, and suppress arcing. These inhibitors protect and lubricate the connection while sealing out liquids and gases.

Remove scale from water-cooled condensers, chillers, and non-potable water boilers.

Dissolve scale and mineral buildup in drinking water systems with these scale removers. They meet NSF/ANSI Standard 60 for use with components that come into contact with drinking water.

Often used on the outside of cooling towers and condensers, these scale removers cling to vertical surfaces to dissolve scale and mineral deposits.

Spray on all types of metal molds to eliminate moisture, dirt, oils, and release agents.

Twice as concentrated as our standard disinfectant/cleaners, these cleaners are often used in laboratories and medical environments where contamination is a concern.

These disinfectants are NSF registered D2 for use in food-processing environments.

Disinfect and deodorize enclosed spaces without coming into contact with potentially harmful chemicals. These broad-spectrum disinfectants kill bacteria and viruses while eliminating unpleasant odors, and the microorganisms that cause them.

Free of chlorine, phosphates, bleach, VOC's, and other harmful chemicals, these cleaners use thyme oil to naturally kill bacteria and viruses while removing dirt and odors to prevent the spread of illness.

Remove oil- or solvent-based residue from metal, plastic, wood, carpet, upholstery, and painted surfaces.

Debond and remove epoxy adhesives from parts, tools, and work areas.

These durable wash guns are typically used for frequent washdowns and cleanup.

With a high maximum pressure and quick-disconnect nozzle connection, these wash guns work with pressure washers and high-pressure spray systems and it’s easy to swap out their nozzles.

Connect these cleaners to existing steam lines to remove dirt, grease, and heavy oils from most surfaces.

The handle makes it easy to brush by hand. Clean delicate surfaces inside tubes, pipes, and holes.

Attach the shank to a handle or power tool.

Keep a variety of brushes on hand to clean surfaces inside tubes, pipes, and holes where scratching is a concern.

Attach the shank to a handle or power tool.

The handle makes it easy to clean tubes, pipes, and holes by hand.

These sets include brushes in the most common screw sizes.

The long shaft on these brushes snakes around curves to reach deep into tubes.

Made of phosphorus bronze that is Factory Mutual approved, these brushes inhibit sparking and are nonmagnetic and corrosion resistant.

The handle makes it easy to brush by hand.

Attach the shank to a handle or power tool.

Attach the shank to a handle or power tool.

Bristles inside the housing and a protruding brush clean the inside and outside of tubes in one step.

Sets include an assortment of brushes for cleaning the inside and outside of tubes.

Use for tasks such as removing weld slag, heavy surface contamination, and large burs.

Also known as semi-aqueous cleaning solutions, these consist of water and other components such as ammonia or citrus. They clean parts with heavy contamination such as buffing and lapping compounds.

Dissolve residue that solvent-based cleaning solutions can leave behind.

Leave a corrosion-resistant film on parts after washing.

Use in bioremediating (also known as self-cleaning) parts washers. Microbes in the solution consume and destroy grease and oil to prevent it from building up in the solution.

Regulate the flow of washing solution with the push-button control.

These blowguns have a metal body.

The rubber tip won't damage parts.

Operate a blowgun without disconnecting your air tool—these guns fit between the tool and air hose. Good for blowing away debris after using an air-powered sander or grinder.

The extra length lets you access hard-to-reach areas.

These guns include a rubber tip that won't damage your workpiece.

Clean surfaces without transferring dust or moisture from the air hose. These blowguns have a replaceable filter that traps particles such as rust and smoke and absorbs moisture.

Attach to your blowgun to direct airflow.

Nozzles are attached to a flexible tube or hose that bends and holds its shape until you reposition it.

Spray these primers onto a mounting surface to quickly and smoothly apply signs, labels, and protective films.

Control media residue so it isn’t transferred to your parts.