Brass coupling nuts are corrosion resistant in wet environments and electrically conductive.

The through hole allows you to connect float rods to float valves.

These brass fittings have the strength to handle high-pressure applications.

Not only do these brass fittings have the strength to handle high-pressure applications, the male threads have a sealant applied for extra protection against leaks.

Use these heavy-duty brass fittings for high-pressure drinking water applications.

The plating on these brass fittings creates a shiny finish and provides extra protection in corrosive environments. Fittings have the strength to handle high-pressure applications.

When space in your pipe line is limited, choose these miniature fittings that are one inch or less in length.

Typically used with low-pressure brass and bronze threaded pipe fittings.

The male threads on these brass fittings have a sealant applied for extra protection against leaks. Also known as Class 125 fittings, they are built for use in low-pressure applications.

Used in low-pressure pipe lines, these brass fittings have a plating that makes them shiny and improves corrosion resistance.

Also known as instrumentation fittings, these have the most precise threads and the tightest tolerances of all the brass pipe fittings we offer.

Extreme pressures are no problem for these heavy-duty brass fittings.

Plated with nickel, these brass fittings resist rust better than steel and unfinished brass fittings. Select them when you need more strength in corrosive environments to handle higher pressures than our low-pressure fittings.

The industry standard for quick-disconnect couplings, these are also known as industrial interchange couplings. Compatible with Industrial-shape plugs and sockets.

Sockets accommodate five common plug shapes: Industrial, ARO, Lincoln, Tru-Flate, and European.

Plugs and sockets are color coded by shape so you can't mix hose lines. Only plugs and sockets of the same color will fit together.

A slim body allows these couplings to fit into tight spaces. Compatible with Compact-shape plugs and sockets.

Metal cam-and-groove couplings have better durability than plastic cam-and-groove couplings.

These couplings have a lower profile than other claw-style couplings to fit in cramped spaces. They consist of a plug and a socket that connect with a quarter twist. Also known as Bowes couplings.

Fittings are metal for better durability than plastic barbed hose fittings. They have sharper barbs than standard barbed hose fittings to grip push-on hose without the need for clamps or ferrules. The more you pull on the fittings, the tighter the hose will grip.

Also known as ball-seat hose nipples, these fittings consist of a barbed shaft with a rounded end that sits inside a female threaded nut. When mated with a male threaded fitting, the rounded end presses tightly against the inside of the male threads for a better seal than a single-piece fitting. Once assembled, insert the barbed end into hose and secure with a clamp or a crimp-on hose ferrule.

The female connector screws directly onto the hose without the need for a separate adapter. When assembled, the fitting compresses against the hose, forming a strong seal. Also known as reusable fittings, they can be unscrewed from the hose end and used on a new hose.

These CGA adapters have a male threaded end that connects to a propane tank and a male threaded end that connects to welding hose.

Commonly used in low-pressure welding applications, these fittings connect downstream of your pressure regulator. Slide the barbed end into hose and secure with a crimp-on hose ferrule.

Designed to handle high-pressure welding applications, these CGA fittings are commonly used to connect pressure regulators to compressed gas tanks or cylinders.

Fittings meet NSF/ANSI Standard 61 for drinking (potable) water.

Fittings meet NSF/ANSI Standard 61 for drinking water. Attach them to garden hose for a variety of water supply applications. They are metal for better durability than plastic garden hose fittings.

These two-piece couplings thread together to create an access point within a garden hose line. The threaded design allows for a more secure hold at the point of connection than quick-disconnect and cam-and-groove garden hose couplings.

Connect these fittings to fire hydrants and washdown equipment.

Use these couplings at pressures up to 5,000 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with International Standard ISO B-shape plugs and sockets.

Couplings consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are designed for coolant applications up to 200 psi. Also known as coolant-line mold couplings.

Made of brass, these fittings have good corrosion resistance.

Made of nickel-plated brass, these fittings have better corrosion resistance than unplated brass fittings.

The threads on these fittings mate with NPT, NPTF, BSPT, and BSPP threads.

Use at pressures up to 250 psi.

An all-metal body and built-in tube support or dual seals allow these fittings to handle the highest pressure ratings of all our push-to-connect tube fittings.

A single sleeve (ferrule) compresses the tubing as you tighten the nut on these fittings, creating a strong seal. They are brass for good corrosion resistance.

These compression tube fittings meet Department of Transportation FMVSS 571 safety standards for air brake lines.

Fittings have good corrosion resistance.

Fittings have good corrosion resistance.

Made of brass, these couplings are more durable than plastic couplings.

These brass fittings meet NSF/ANSI 372 for drinking water. They include a nut with a built-in sleeve (ferrule), so there’s no need to remove the nut for assembly.