Material Material |
---|
Overall Height Overall Height |
---|
|
|
Check Valve Type Check Valve Type |
---|
|
Shank Type Shank Type |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
Maximum Pressure Maximum Pressure |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
About Grease Fitting Threads
More
About Oil Fittings and Oil Cups
More
Grease Fittings
These fittings are also known as hydraulic grease fittings.
Brass fittings are more corrosion resistant than zinc-plated steel fittings.
Fittings with a check valve prevent grease from leaking when pressure causes backward flow. The valve stays closed when not in use to keep out dirt and other contaminants.
PTF-SAE and NPTF (Dryseal) threads are compatible with NPT threads. UNF and UNEF threads are similar to threads on a machine screw or bolt. They require a sealant, such as an O-ring, to minimize leakage.
For technical drawings and 3-D models, click on a part number.

Male
Threads
Pkg. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Material | Overall Ht. | Shank Lg. | Thread Lg. | Hex Size | Max. Pressure, psi | Check Valve Type | Specifications Met | Pkg. Qty. | 1-9 | 10-Up | |
1/4"-28 UNF Threads | |||||||||||
Brass | 17/32" | 5/32" | 5/32" | 9/32" | 10,000 | Ball | __ | 5 | 000000 | 00000 | 00000 |
Brass | 19/32" | 7/32" | 7/32" | 9/32" | 10,000 | Ball | __ | 5 | 000000 | 0000 | 0000 |
5/16"-24 UNF Threads | |||||||||||
Brass | 19/32" | 7/32" | 7/32" | 11/32" | 10,000 | Ball | __ | 5 | 0000000 | 0000 | 0000 |
3/8"-24 UNF Threads | |||||||||||
Brass | 19/32" | 7/32" | 7/32" | 7/16" | 10,000 | Ball | __ | 5 | 0000000 | 0000 | 0000 |
M6 × 1 mm Metric Threads | |||||||||||
Brass | 14mm | 4mm | 4mm | 7mm | 10,000 | Ball | DIN 71412 | 5 | 0000000 | 0000 | 0000 |
M8 × 1 mm Metric Threads | |||||||||||
Brass | 15mm | 5.5mm | 5.5mm | 9mm | 10,000 | Ball | DIN 71412 | 5 | 0000000 | 0000 | 0000 |
M8 × 1.25 mm Metric Threads | |||||||||||
Brass | 15mm | 5.5mm | 5.5mm | 9mm | 10,000 | Ball | DIN 71412 | 5 | 0000000 | 0000 | 0000 |
M10 × 1 mm Metric Threads | |||||||||||
Brass | 15mm | 5.5mm | 5.5mm | 11mm | 10,000 | Ball | DIN 71412 | 5 | 0000000 | 0000 | 0000 |
1/8 PTF-SAE Threads | |||||||||||
Brass | 19/32" | 7/32" | 7/32" | 7/16" | 10,000 | Ball | __ | 5 | 0000000 | 0000 | 0000 |
Brass | 11/16" | 19/64" | 1/4" | 7/16" | 10,000 | Ball | __ | 5 | 0000000 | 00000 | 00000 |

Pkg. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Material | Overall Ht. | Thread Lg. | Shank Lg. | Hex Size | Max. Pressure, psi | Check Valve Type | Specifications Met | Pkg. Qty. | 1-9 | 10-Up | |
1/4"-28 UNF Threads | |||||||||||
Brass | 45/64" | 7/32" | 7/32" | 11/32" | 10,000 | Ball | __ | 3 | 000000 | 000000 | 00000 |
M6 × 1 mm Metric Threads | |||||||||||
Brass | 18mm | 5.5mm | 5.5mm | 9mm | 10,000 | Ball | DIN 71412 | 5 | 0000000 | 00000 | 00000 |
M8 × 1 mm Metric Threads | |||||||||||
Brass | 18mm | 5.5mm | 5.5mm | 9mm | 10,000 | Ball | DIN 71412 | 1 | 0000000 | 0000 | 0000 |
M8 × 1.25 mm Metric Threads | |||||||||||
Brass | 18mm | 5.5mm | 5.5mm | 9mm | 10,000 | Ball | DIN 71412 | 3 | 0000000 | 00000 | 0000 |
M10 × 1 mm Metric Threads | |||||||||||
Brass | 20mm | 5.5mm | 5.5mm | 11mm | 10,000 | Ball | DIN 71412 | 3 | 0000000 | 00000 | 00000 |

Pkg. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Material | Overall Ht. | Thread Lg. | Shank Lg. | Hex Size | Max. Pressure, psi | Check Valve Type | Specifications Met | Pkg. Qty. | 1-9 | 10-Up | |
1/4"-28 UNF Threads | |||||||||||
Brass | 59/64" | 7/32" | 7/32" | 11/32" | 10,000 | Ball | __ | 1 | 000000 | 00000 | 00000 |
5/16"-24 UNF Threads | |||||||||||
Brass | 59/64" | 7/32" | 7/32" | 11/32" | 10,000 | Ball | __ | 3 | 0000000 | 00000 | 0000 |
M6 × 1 mm Metric Threads | |||||||||||
Brass | 24mm | 5.5mm | 5.5mm | 9mm | 10,000 | Ball | DIN 71412 | 5 | 0000000 | 00000 | 00000 |
M8 × 1 mm Metric Threads | |||||||||||
Brass | 24mm | 5.5mm | 5.5mm | 9mm | 10,000 | Ball | DIN 71412 | 5 | 0000000 | 00000 | 00000 |
M8 × 1.25 mm Metric Threads | |||||||||||
Brass | 24mm | 5.5mm | 5.5mm | 9mm | 10,000 | Ball | DIN 71412 | 1 | 0000000 | 0000 | 0000 |
M10 × 1 mm Metric Threads | |||||||||||
Brass | 25mm | 5.5mm | 5.5mm | 11mm | 10,000 | Ball | DIN 71412 | 3 | 0000000 | 00000 | 00000 |
Pin-Style Grease Fittings
The pins on these fittings lock with dispensing tips for pin-style fittings to create a tight seal. Their brass bodies resist corrosion. They have a check valve that prevents grease from leaking when pressure causes backward flow. The valve stays closed when not in use to keep out dirt and other contaminants.They have PTF-SAE and NPTF (Dryseal) threads, which are compatible with NPT threads.
Zinc-plated steel fittings have mild corrosion resistance. Brass fitting is more corrosion resistant than zinc-plated steel fittings.
For technical drawings and 3-D models, click on a part number.

Each | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Body Material | Pin Material | Overall Ht. | Shank Lg. | Thread Lg. | Hex Size | Max. Pressure, psi | Check Valve Type | 1-9 | 10-Up | |
1/4 NPTF Threads | ||||||||||
Brass | Zinc-Plated Steel | 1 3/32" | 5/16" | 5/16" | 17/32" | 8,000 | Ball | 0000000 | 00000 | 00000 |
1/8 PTF-SAE Threads | ||||||||||
Brass | Zinc-Plated Steel | 31/32" | 17/64" | 17/64" | 7/16" | 8,000 | Ball | 0000000 | 0000 | 0000 |
Brass | Copper-Plated 400 Nickel | 31/32" | 17/64" | 17/64" | 7/16" | 8,000 | Ball | 0000000 | 0000 | 0000 |

Each | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Body Material | Pin Material | Overall Ht. | Shank Lg. | Thread Lg. | Hex Size | Max. Pressure, psi | Check Valve Type | 1-9 | 10-Up | |
1/8 NPTF Threads | ||||||||||
Brass, Zinc-Plated Steel | Zinc-Plated Steel | 1 23/32" | 7/16" | 7/32" | 7/16" | 8,000 | Ball | 0000000 | 00000 | 00000 |
Grease Fitting Adapters
When the size or thread type of a fitting doesn't match an existing opening, use these adapters to make the connection.
Brass adapters are more corrosion resistant than zinc-plated steel adapters. UNF threads are similar to threads on a machine screw or bolt. They require a sealant, such as an O-ring, to minimize leakage.
For technical drawings and 3-D models, click on a part number.

Connection | ||||
---|---|---|---|---|
Male | Female | Material | Each | |
UNF 10-32 | NPT 1/8 | Brass | 00000000 | 000000 |
NPT 1/8 | NPT 1/4 | Brass | 00000000 | 00000 |
BSPT 1/8 | NPT 1/8 | Brass | 00000000 | 00000 |
BSPT 1/8 | Metric M10 ×1mm | Brass | 00000000 | 00000 |
BSPT 1/4 | NPT 1/4 | Brass | 00000000 | 00000 |
Metric M8 × 1 mm | NPT 1/8 | Brass | 00000000 | 00000 |
Metric M8 × 1 mm | BSPT 1/8 | Brass | 00000000 | 00000 |
Metric M8 × 1.25 mm | NPT 1/8 | Brass | 00000000 | 00000 |
Metric M10 × 1.5 mm | NPT 1/8 | Brass | 00000000 | 0000 |
Metric M16 × 1.5 mm | NPT 1/8 | Brass | 00000000 | 00000 |

Connection | ||||
---|---|---|---|---|
Male | Female | Material | Each | |
NPT 1/8 | NPT 1/8 | Brass | 00000000 | 000000 |

Connection | ||||
---|---|---|---|---|
Male | Female | Material | Each | |
NPT 1/8 | NPT 1/8 | Brass | 00000000 | 000000 |
Remote-Access Grease Fittings
Access difficult-to-reach lubrications points from up to 10 ft. away. The fitting is brass, which is corrosion resistant. An integral check valve prevents grease from leaking when pressure causes backward flow. The valve stays closed when not in use to keep out dirt and other contaminants.
For technical drawings and 3-D models, click on a part number.

Tube | Each | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Type | Pipe Size | Gender | Material | Fitting Material | Material | Lg., ft. | Bend Radius | Check Valve Type | For NLGI Viscosity Grade | Temp. Range, °F | 1-5 | 6-Up | |
NPT | 1/8 | Male | Brass | Brass | Polyethylene Plastic | 10 | 2 1/2" | Ball | 0, 00, 1, 2, 3, 4 | -10° to 180° | 0000000 | 000000 | 000000 |
Oil Fittings
Zinc-plated brass fittings have good corrosion resistance. Nickel-plated brass fittings are more corrosion resistant than zinc-plated brass fittings.
Fitting with a check valve prevents oil from leaking when pressure causes backward flow. The valve stays closed when not in use to keep out dirt and other contaminants. Fittings with a self-closing hinged cover block contaminants from entering equipment.
UNF and UNEF threads are similar to threads on a machine screw or bolt. They require a sealant, such as an O-ring, to minimize leakage.
Note: Fittings do not hold oil; any oil dispensed into the fittings passes into the part to be lubricated.
For technical drawings and 3-D models, click on a part number.


Each | |||||||
---|---|---|---|---|---|---|---|
Material | Overall Ht. | Shank Lg. | Thread Lg. | Installation Clearance | 1-9 | 10-Up | |
1/4"-32 Male UNEF Threads | |||||||
Zinc-Plated Brass | 7/16" | 7/32" | 7/32" | 3/8" | 000000 | 000000 | 000000 |


Each | |||||||
---|---|---|---|---|---|---|---|
Material | Overall Ht. | Shank Lg. | Thread Lg. | Installation Clearance | 1-9 | 10-Up | |
M5 × 0.8 mm Male Metric Threads | |||||||
Nickel-Plated Brass | 15mm | 4mm | 4mm | 16mm | 0000000 | 000000 | 000000 |
M6 × 1 mm Male Metric Threads | |||||||
Nickel-Plated Brass | 15mm | 5mm | 5mm | 19mm | 0000000 | 00000 | 00000 |
M8 × 1.25 mm Male Metric Threads | |||||||
Nickel-Plated Brass | 16.5mm | 5mm | 5mm | 19mm | 0000000 | 00000 | 00000 |