Search Results
Shape Shape |
|---|
 |  |
| Round Tube | Hex Tube |
 | |
| Rectangular Tube |
OD OD |
|---|
ID ID |
|---|
Yield Strength Yield Strength |
|---|
|
Modulus of Elasticity Modulus of Elasticity |
|---|
|
Hardness Hardness |
|---|
|
Thermal Conductivity Thermal Conductivity |
|---|
|
Density Density |
|---|
|
About Copper, Brass, and Bronze
More
High-Strength 330 Brass
- Yield Strength: 60,000 psi
- Hardness: Rockwell B75 (Medium)
- Temper: H80 (Full Hard)
- Heat Treatable: No
- Specifications Met: ASTM B135
Offering the highest yield strength of all our brass, 330 has a low lead content for a good balance of machinability and formability. It's used for fire station poles, pump cylinder lines, and plumbing accessories.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| OD | OD Tolerance Range | ID | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/8" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||
|---|---|---|---|---|---|---|
| 5/8" | -0.002" to 0.002" | 3/8" | 0000000 | |||
| 3/4" | -0.0025" to 0.0025" | 1/2" | 0000000 | |||
| 7/8" | -0.0025" to 0.0025" | 5/8" | 0000000 | |||
| 1" | -0.003" to 0.003" | 3/4" | 0000000 | |||
| 1 1/4" | -0.003" to 0.003" | 1" | 0000000 | |||
| 1 3/8" | -0.003" to 0.003" | 1 1/8" | 0000000 | |||
| 1 1/2" | -0.003" to 0.003" | 1 1/4" | 0000000 | |||
| 2" | -0.003" to 0.003" | 1 3/4" | 0000000 | |||
| 2 1/2" | -0.004" to 0.004" | 2 1/4" | 0000000 | |||
Ultra-Formable 260 Brass Round Tubes
The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.
Tubes with 0.014" and 0.45 mm wall thicknesses allow you to create telescoping tubes; each tube fits inside the next larger size.
Tubes
- Yield Strength: Not Rated
- Hardness:
0.014" wall thick.: Not Rated
All other sizes: Rockwell B55 (Soft) - Temper:
0.014" wall thick.: H02 (1/2 Hard) to H03 (3/4 Hard)
All other sizes: H58 - Heat Treatable: No
- Specifications Met: ASTM B135
| OD | OD Tolerance Range | ID | Pkg. Qty. | Pkg. | |
1 ft. Lg. | |||||
|---|---|---|---|---|---|
0.014" Wall Thick. (-0.001" to 0.001" Tolerance) | |||||
| 1/16" | -0.002" to 0.002" | 0.035" | 3 | 00000000 | 00000 |
| 3/32" | -0.002" to 0.002" | 0.066" | 3 | 0000000 | 0000 |
| 1/8" | -0.002" to 0.002" | 0.097" | 1 | 0000000 | 0000 |
| 5/32" | -0.002" to 0.002" | 0.128" | 1 | 0000000 | 0000 |
| 3/16" | -0.002" to 0.002" | 0.16" | 1 | 0000000 | 0000 |
| 7/32" | -0.002" to 0.002" | 0.191" | 1 | 0000000 | 0000 |
| 1/4" | -0.002" to 0.002" | 0.222" | 1 | 0000000 | 0000 |
| 9/32" | -0.002" to 0.002" | 0.253" | 1 | 0000000 | 0000 |
| 5/16" | -0.002" to 0.002" | 0.285" | 1 | 0000000 | 0000 |
| 11/32" | -0.002" to 0.002" | 0.316" | 1 | 0000000 | 0000 |
| 3/8" | -0.002" to 0.002" | 0.347" | 1 | 0000000 | 0000 |
| 13/32" | -0.002" to 0.002" | 0.378" | 1 | 0000000 | 0000 |
| 7/16" | -0.002" to 0.002" | 0.41" | 1 | 0000000 | 0000 |
| 15/32" | -0.002" to 0.002" | 0.441" | 1 | 0000000 | 0000 |
| 1/2" | -0.002" to 0.002" | 0.472" | 1 | 0000000 | 0000 |
| 17/32" | -0.002" to 0.002" | 0.503" | 1 | 0000000 | 0000 |
| 9/16" | -0.002" to 0.002" | 0.535" | 1 | 0000000 | 0000 |
| 19/32" | -0.002" to 0.002" | 0.566" | 1 | 0000000 | 0000 |
| 5/8" | -0.002" to 0.002" | 0.597" | 1 | 0000000 | 0000 |
| 21/32" | -0.002" to 0.002" | 0.628" | 1 | 0000000 | 0000 |
| Each | |||||
0.032" Wall Thick. (-0.004" to 0.004" Tolerance) | |||||
| 3/16" | -0.004" to 0.004" | 0.124" | __ | 00000000 | 0000 |
| 1/4" | -0.004" to 0.004" | 0.186" | __ | 00000000 | 0000 |
| 5/16" | -0.004" to 0.004" | 0.249" | __ | 00000000 | 0000 |
| 3/8" | -0.004" to 0.004" | 0.311" | __ | 00000000 | 0000 |
| 1/2" | -0.004" to 0.004" | 0.436" | __ | 00000000 | 0000 |
| 1" | -0.004" to 0.004" | 0.936" | __ | 00000000 | 00000 |
| 1 3/8" | -0.004" to 0.004" | 1.311" | __ | 00000000 | 00000 |
| 2 1/4" | -0.004" to 0.004" | 2.186" | __ | 00000000 | 00000 |
0.049" Wall Thick. (-0.004" to 0.004" Tolerance) | |||||
| 3/16" | -0.004" to 0.004" | 0.09" | __ | 00000000 | 0000 |
| 1/4" | -0.004" to 0.004" | 0.152" | __ | 00000000 | 0000 |
| 5/16" | -0.004" to 0.004" | 0.215" | __ | 00000000 | 0000 |
| 3/8" | -0.004" to 0.004" | 0.277" | __ | 00000000 | 00000 |
| 5/8" | -0.004" to 0.004" | 0.527" | __ | 00000000 | 00000 |
| 3/4" | -0.004" to 0.004" | 0.652" | __ | 00000000 | 00000 |
| 7/8" | -0.004" to 0.004" | 0.777" | __ | 00000000 | 00000 |
0.065" Wall Thick. (-0.006" to 0.006" Tolerance) | |||||
| 1/4" | -0.004" to 0.004" | 0.12" | __ | 00000000 | 0000 |
| 5/16" | -0.004" to 0.004" | 0.183" | __ | 00000000 | 00000 |
| 3/8" | -0.004" to 0.004" | 0.245" | __ | 00000000 | 00000 |
| 7/16" | -0.004" to 0.004" | 0.308" | __ | 00000000 | 00000 |
| 1/2" | -0.004" to 0.004" | 0.37" | __ | 00000000 | 00000 |
| 5/8" | -0.004" to 0.004" | 0.495" | __ | 00000000 | 00000 |
| 3/4" | -0.004" to 0.004" | 0.62" | __ | 00000000 | 00000 |
| 7/8" | -0.004" to 0.004" | 0.745" | __ | 00000000 | 00000 |
| 1" | -0.004" to 0.004" | 0.87" | __ | 00000000 | 00000 |
| 1 1/8" | -0.004" to 0.004" | 0.995" | __ | 00000000 | 00000 |
| 1 1/4" | -0.004" to 0.004" | 1.12" | __ | 00000000 | 00000 |
| 1 3/8" | -0.004" to 0.004" | 1.245" | __ | 00000000 | 00000 |
| 1 1/2" | -0.004" to 0.004" | 1.37" | __ | 00000000 | 00000 |
| 1 5/8" | -0.004" to 0.004" | 1.495" | __ | 00000000 | 00000 |
| 1 3/4" | -0.004" to 0.004" | 1.62" | __ | 00000000 | 00000 |
| 1 7/8" | -0.004" to 0.004" | 1.745" | __ | 00000000 | 00000 |
| 2 1/2" | -0.004" to 0.004" | 2.37" | __ | 00000000 | 00000 |
| Pkg. | |||||
3 ft. Lg. | |||||
0.014" Wall Thick. (-0.001" to 0.001" Tolerance) | |||||
| 1/16" | -0.002" to 0.002" | 0.035" | 5 | 00000000 | 00000 |
| 3/32" | -0.002" to 0.002" | 0.066" | 5 | 00000000 | 00000 |
| 1/8" | -0.002" to 0.002" | 0.097" | 5 | 00000000 | 00000 |
| 5/32" | -0.002" to 0.002" | 0.128" | 5 | 00000000 | 00000 |
| 3/16" | -0.002" to 0.002" | 0.16" | 6 | 00000000 | 00000 |
| 7/32" | -0.002" to 0.002" | 0.191" | 6 | 00000000 | 00000 |
| 1/4" | -0.002" to 0.002" | 0.222" | 5 | 00000000 | 00000 |
| 9/32" | -0.002" to 0.002" | 0.253" | 5 | 00000000 | 00000 |
| 5/16" | -0.002" to 0.002" | 0.285" | 4 | 00000000 | 00000 |
| 11/32" | -0.002" to 0.002" | 0.316" | 1 | 00000000 | 0000 |
| 3/8" | -0.002" to 0.002" | 0.347" | 3 | 00000000 | 00000 |
| 13/32" | -0.002" to 0.002" | 0.378" | 1 | 00000000 | 0000 |
| 7/16" | -0.002" to 0.002" | 0.41" | 1 | 00000000 | 0000 |
| 15/32" | -0.002" to 0.002" | 0.441" | 1 | 00000000 | 00000 |
| 1/2" | -0.002" to 0.002" | 0.472" | 1 | 00000000 | 00000 |
| 17/32" | -0.002" to 0.002" | 0.503" | 1 | 00000000 | 00000 |
| 9/16" | -0.002" to 0.002" | 0.535" | 1 | 00000000 | 00000 |
| 19/32" | -0.002" to 0.002" | 0.566" | 1 | 00000000 | 00000 |
| 5/8" | -0.002" to 0.002" | 0.597" | 1 | 00000000 | 00000 |
| 21/32" | -0.002" to 0.002" | 0.628" | 1 | 00000000 | 00000 |
| Each | |||||
0.032" Wall Thick. (-0.004" to 0.004" Tolerance) | |||||
| 3/16" | -0.004" to 0.004" | 0.124" | __ | 00000000 | 00000 |
| 1/4" | -0.004" to 0.004" | 0.186" | __ | 00000000 | 00000 |
| 5/16" | -0.004" to 0.004" | 0.249" | __ | 00000000 | 00000 |
| 3/8" | -0.004" to 0.004" | 0.311" | __ | 00000000 | 00000 |
| 1/2" | -0.004" to 0.004" | 0.436" | __ | 00000000 | 00000 |
| 1" | -0.004" to 0.004" | 0.936" | __ | 00000000 | 00000 |
| 1 3/8" | -0.004" to 0.004" | 1.311" | __ | 00000000 | 00000 |
| 2 1/4" | -0.004" to 0.004" | 2.186" | __ | 00000000 | 00000 |
0.049" Wall Thick. (-0.004" to 0.004" Tolerance) | |||||
| 3/16" | -0.004" to 0.004" | 0.09" | __ | 00000000 | 00000 |
| 1/4" | -0.004" to 0.004" | 0.152" | __ | 00000000 | 00000 |
| 5/16" | -0.004" to 0.004" | 0.215" | __ | 00000000 | 00000 |
| 3/8" | -0.004" to 0.004" | 0.277" | __ | 00000000 | 00000 |
| 5/8" | -0.004" to 0.004" | 0.527" | __ | 00000000 | 00000 |
| 3/4" | -0.004" to 0.004" | 0.652" | __ | 00000000 | 00000 |
| 7/8" | -0.004" to 0.004" | 0.777" | __ | 00000000 | 00000 |
0.065" Wall Thick. (-0.006" to 0.006" Tolerance) | |||||
| 1/4" | -0.004" to 0.004" | 0.12" | __ | 00000000 | 00000 |
| 5/16" | -0.004" to 0.004" | 0.183" | __ | 00000000 | 00000 |
| 3/8" | -0.004" to 0.004" | 0.245" | __ | 00000000 | 00000 |
| 7/16" | -0.004" to 0.004" | 0.308" | __ | 00000000 | 00000 |
| 1/2" | -0.004" to 0.004" | 0.37" | __ | 00000000 | 00000 |
| 5/8" | -0.004" to 0.004" | 0.495" | __ | 00000000 | 00000 |
| 3/4" | -0.004" to 0.004" | 0.62" | __ | 00000000 | 00000 |
| 7/8" | -0.004" to 0.004" | 0.745" | __ | 00000000 | 00000 |
| 1" | -0.004" to 0.004" | 0.87" | __ | 00000000 | 00000 |
| 1 1/8" | -0.004" to 0.004" | 0.995" | __ | 00000000 | 00000 |
| 1 1/4" | -0.004" to 0.004" | 1.12" | __ | 00000000 | 00000 |
| 1 3/8" | -0.004" to 0.004" | 1.245" | __ | 00000000 | 00000 |
| 1 1/2" | -0.004" to 0.004" | 1.37" | __ | 00000000 | 00000 |
| 1 5/8" | -0.004" to 0.004" | 1.495" | __ | 00000000 | 000000 |
| 1 3/4" | -0.004" to 0.004" | 1.62" | __ | 00000000 | 000000 |
| 1 7/8" | -0.004" to 0.004" | 1.745" | __ | 00000000 | 000000 |
| 2 1/2" | -0.004" to 0.004" | 2.37" | __ | 00000000 | 000000 |
Metric Tubes
- Yield Strength: Not Rated
- Hardness: Not Rated
- Temper: H02 (1/2 Hard) to H03 (3/4 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B135
300 mm Lg. | |||||
|---|---|---|---|---|---|
| OD, mm | OD Tolerance Range, mm | ID, mm | Pkg. Qty. | Pkg. | |
0.45 mm Wall Thick. (-0.025 to 0.025 mm Tolerance) | |||||
| 2 | -0.051 to 0.051 | 1.1 | 4 | 00000000 | 00000 |
| 3 | -0.051 to 0.051 | 2.1 | 4 | 00000000 | 0000 |
| 4 | -0.051 to 0.051 | 3.1 | 3 | 00000000 | 0000 |
| 5 | -0.051 to 0.051 | 4.1 | 3 | 00000000 | 0000 |
| 6 | -0.051 to 0.051 | 5.1 | 2 | 00000000 | 0000 |
| 7 | -0.051 to 0.051 | 6.1 | 2 | 00000000 | 0000 |
| 8 | -0.051 to 0.051 | 7.1 | 2 | 00000000 | 0000 |
| 9 | -0.051 to 0.051 | 8.1 | 1 | 00000000 | 0000 |
| 10 | -0.051 to 0.051 | 9.1 | 1 | 00000000 | 0000 |
Ultra-Formable 260 Brass Hex Tubes
- Yield Strength: Not Rated
- Hardness: Not Rated
- Temper: H02 (1/2 Hard) to H03 (3/4 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B135
The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.
Ultra-Formable 260 Brass Rectangular Tubes
- Yield Strength: Not Rated
- Hardness: Not Rated
- Temper: H02 (1/2 Hard) to H03 (3/4 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B135
The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware. Each tube fits inside the next larger size for creating telescoping tubes.
Outside | Inside | 1 ft. Lg. | ||||||
|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Pkg. Qty. | Pkg. | |
0.014" Wall Thick. (-0.001" to 0.001" Tolerance) | ||||||||
| 1/16" | -0.002" to 0.002" | 1/16" | -0.002" to 0.002" | 0.035" | 0.035" | 2 | 00000000 | 00000 |
| 3/32" | -0.002" to 0.002" | 3/32" | -0.002" to 0.002" | 0.066" | 0.066" | 2 | 00000000 | 0000 |
| 3/32" | -0.002" to 0.002" | 3/16" | -0.002" to 0.002" | 0.066" | 0.16" | 1 | 00000000 | 0000 |
| 1/8" | -0.002" to 0.002" | 1/8" | -0.002" to 0.002" | 0.097" | 0.097" | 1 | 0000000 | 0000 |
| 1/8" | -0.002" to 0.002" | 1/4" | -0.002" to 0.002" | 0.097" | 0.222" | 1 | 00000000 | 0000 |
| 5/32" | -0.002" to 0.002" | 5/32" | -0.002" to 0.002" | 0.128" | 0.128" | 1 | 0000000 | 0000 |
| 5/32" | -0.002" to 0.002" | 5/16" | -0.002" to 0.002" | 0.128" | 0.285" | 1 | 00000000 | 0000 |
| 3/16" | -0.002" to 0.002" | 3/16" | -0.002" to 0.002" | 0.16" | 0.16" | 1 | 0000000 | 0000 |
| 3/16" | -0.002" to 0.002" | 3/8" | -0.002" to 0.002" | 0.16" | 0.347" | 1 | 00000000 | 0000 |
| 7/32" | -0.002" to 0.002" | 7/32" | -0.002" to 0.002" | 0.191" | 0.191" | 1 | 0000000 | 0000 |
| 1/4" | -0.002" to 0.002" | 1/4" | -0.002" to 0.002" | 0.222" | 0.222" | 1 | 0000000 | 0000 |