Material Material | Show |
---|
|
Material Material | Hide |
---|
System of Measurement System of Measurement |
---|
|
Opening Size Opening Size |
---|
|
|
|
Mesh Size Mesh Size |
---|
Construction Construction |
---|
![]() | Woven |
![]() | Perforated |
Wire Diameter Wire Diameter |
---|
Shape Shape |
---|
![]() | Sheet and Bar |
Thread Type Thread Type |
---|
|
For Use With For Use With |
---|
|
Hole Diameter Hole Diameter |
---|
|
|
|
Maximum Pressure Maximum Pressure |
---|
|
Thickness Thickness |
---|
|
Hole Center-to-Center Hole Center-to-Center |
---|
|
|
|
Screen Material Screen Material |
---|
|
Connection Style Connection Style |
---|
![]() |
Threaded |
More
More
Brass is often used in marine environments because it is more resistant to corrosion from salt water than stainless steel. It has good abrasion resistance.
Mesh Size | Opening Size | Open Area | Wire Dia. | 1 ft. × 1 ft. | 1 ft. × 2 ft. | 2 ft. × 2 ft. | 2 ft. × 3 ft. | 3 ft. × 3 ft. | |
3 × 3 | 0.27" | 65% | 0.063" | 0000000 | |||||
4 × 4 | 0.203" | 65% | 0.047" | 0000000 | |||||
6 × 6 | 0.132" | 62% | 0.035" | 0000000 | |||||
8 × 8 | 0.097" | 60% | 0.028" | 0000000 | |||||
10 × 10 | 0.075" | 56% | 0.025" | 0000000 | |||||
12 × 12 | 0.06" | 51% | 0.023" | 0000000 | |||||
14 × 14 | 0.051" | 51% | 0.02" | 0000000 | |||||
16 × 16 | 0.045" | 50% | 0.018" | 0000000 | |||||
18 × 18 | 0.039" | 48% | 0.017" | 0000000 | |||||
20 × 20 | 0.034" | 46% | 0.016" | 0000000 | |||||
24 × 24 | 0.028" | 44% | 0.014" | 0000000 | |||||
30 × 30 | 0.021" | 40% | 0.012" | 0000000 | |||||
40 × 40 | 0.015" | 36% | 0.01" | 0000000 | |||||
50 × 50 | 0.011" | 30% | 0.009" | 0000000 | |||||
60 × 60 | 0.009" | 30% | 0.0075" | 0000000 | |||||
80 × 80 | 0.007" | 31% | 0.0055" | 0000000 | |||||
100 × 100 | 0.006" | 30% | 0.0045" | 0000000 |
3 ft. Wd. | ||||||
---|---|---|---|---|---|---|
Mesh Size | Opening Size | Open Area | Wire Dia. | Lg., ft. | Each | |
3 × 3 | 0.27" | 65% | 0.063" | 1 | 00000000 | 000000 |
3 × 3 | 0.27" | 65% | 0.063" | 10 | 00000000 | 000000 |
3 × 3 | 0.27" | 65% | 0.063" | 20 | 00000000 | 000000 |
3 × 3 | 0.27" | 65% | 0.063" | 50 | 00000000 | 00000000 |
4 × 4 | 0.203" | 65% | 0.047" | 1 | 00000000 | 00000 |
4 × 4 | 0.203" | 65% | 0.047" | 10 | 00000000 | 000000 |
4 × 4 | 0.203" | 65% | 0.047" | 20 | 00000000 | 000000 |
4 × 4 | 0.203" | 65% | 0.047" | 50 | 00000000 | 00000000 |
6 × 6 | 0.132" | 62% | 0.035" | 1 | 00000000 | 00000 |
6 × 6 | 0.132" | 62% | 0.035" | 10 | 00000000 | 000000 |
6 × 6 | 0.132" | 62% | 0.035" | 20 | 00000000 | 000000 |
6 × 6 | 0.132" | 62% | 0.035" | 50 | 00000000 | 00000000 |
8 × 8 | 0.097" | 60% | 0.028" | 1 | 00000000 | 00000 |
8 × 8 | 0.097" | 60% | 0.028" | 10 | 00000000 | 000000 |
8 × 8 | 0.097" | 60% | 0.028" | 20 | 00000000 | 000000 |
8 × 8 | 0.097" | 60% | 0.028" | 50 | 00000000 | 00000000 |
10 × 10 | 0.075" | 56% | 0.025" | 1 | 00000000 | 00000 |
10 × 10 | 0.075" | 56% | 0.025" | 10 | 00000000 | 000000 |
10 × 10 | 0.075" | 56% | 0.025" | 20 | 00000000 | 000000 |
10 × 10 | 0.075" | 56% | 0.025" | 50 | 00000000 | 00000000 |
12 × 12 | 0.06" | 51% | 0.023" | 1 | 00000000 | 00000 |
12 × 12 | 0.06" | 51% | 0.023" | 10 | 00000000 | 000000 |
12 × 12 | 0.06" | 51% | 0.023" | 20 | 00000000 | 000000 |
12 × 12 | 0.06" | 51% | 0.023" | 50 | 00000000 | 00000000 |
14 × 14 | 0.051" | 51% | 0.02" | 1 | 00000000 | 00000 |
14 × 14 | 0.051" | 51% | 0.02" | 10 | 00000000 | 000000 |
14 × 14 | 0.051" | 51% | 0.02" | 20 | 00000000 | 000000 |
14 × 14 | 0.051" | 51% | 0.02" | 50 | 00000000 | 00000000 |
16 × 16 | 0.045" | 50% | 0.018" | 1 | 00000000 | 00000 |
16 × 16 | 0.045" | 50% | 0.018" | 10 | 00000000 | 000000 |
16 × 16 | 0.045" | 50% | 0.018" | 20 | 00000000 | 000000 |
16 × 16 | 0.045" | 50% | 0.018" | 50 | 00000000 | 00000000 |
18 × 18 | 0.039" | 48% | 0.017" | 1 | 00000000 | 00000 |
18 × 18 | 0.039" | 48% | 0.017" | 10 | 00000000 | 000000 |
18 × 18 | 0.039" | 48% | 0.017" | 20 | 00000000 | 000000 |
18 × 18 | 0.039" | 48% | 0.017" | 50 | 00000000 | 00000000 |
20 × 20 | 0.034" | 46% | 0.016" | 1 | 00000000 | 00000 |
20 × 20 | 0.034" | 46% | 0.016" | 10 | 00000000 | 000000 |
20 × 20 | 0.034" | 46% | 0.016" | 20 | 00000000 | 000000 |
20 × 20 | 0.034" | 46% | 0.016" | 50 | 00000000 | 00000000 |
24 × 24 | 0.028" | 44% | 0.014" | 1 | 00000000 | 00000 |
24 × 24 | 0.028" | 44% | 0.014" | 10 | 00000000 | 000000 |
24 × 24 | 0.028" | 44% | 0.014" | 20 | 00000000 | 000000 |
24 × 24 | 0.028" | 44% | 0.014" | 50 | 00000000 | 00000000 |
30 × 30 | 0.021" | 40% | 0.012" | 1 | 00000000 | 00000 |
30 × 30 | 0.021" | 40% | 0.012" | 10 | 00000000 | 000000 |
30 × 30 | 0.021" | 40% | 0.012" | 20 | 00000000 | 000000 |
30 × 30 | 0.021" | 40% | 0.012" | 50 | 00000000 | 00000000 |
40 × 40 | 0.015" | 36% | 0.01" | 1 | 00000000 | 00000 |
40 × 40 | 0.015" | 36% | 0.01" | 10 | 00000000 | 000000 |
40 × 40 | 0.015" | 36% | 0.01" | 20 | 00000000 | 000000 |
40 × 40 | 0.015" | 36% | 0.01" | 50 | 00000000 | 00000000 |
50 × 50 | 0.011" | 30% | 0.009" | 1 | 00000000 | 00000 |
50 × 50 | 0.011" | 30% | 0.009" | 10 | 00000000 | 000000 |
50 × 50 | 0.011" | 30% | 0.009" | 20 | 00000000 | 000000 |
50 × 50 | 0.011" | 30% | 0.009" | 50 | 00000000 | 00000000 |
60 × 60 | 0.009" | 30% | 0.0075" | 1 | 00000000 | 00000 |
60 × 60 | 0.009" | 30% | 0.0075" | 10 | 00000000 | 000000 |
60 × 60 | 0.009" | 30% | 0.0075" | 20 | 00000000 | 000000 |
60 × 60 | 0.009" | 30% | 0.0075" | 50 | 00000000 | 000000 |
80 × 80 | 0.007" | 31% | 0.0055" | 1 | 00000000 | 00000 |
80 × 80 | 0.007" | 31% | 0.0055" | 10 | 00000000 | 000000 |
80 × 80 | 0.007" | 31% | 0.0055" | 20 | 00000000 | 000000 |
80 × 80 | 0.007" | 31% | 0.0055" | 50 | 00000000 | 000000 |
100 × 100 | 0.006" | 30% | 0.0045" | 1 | 00000000 | 00000 |
100 × 100 | 0.006" | 30% | 0.0045" | 10 | 00000000 | 000000 |
100 × 100 | 0.006" | 30% | 0.0045" | 20 | 00000000 | 000000 |
100 × 100 | 0.006" | 30% | 0.0045" | 50 | 00000000 | 000000 |
Maximize flow when straining your liquid process lines—material passes more quickly through this wire cloth's rectangular openings than through other wire cloth.
Made of brass, it has good corrosion and abrasion resistance. It’s often used with salt solutions.
Bend and shape these sheets to make strainers that fit your application—brass is soft and easy to form. It has good corrosion resistance.
Per Ft. | |||||||
---|---|---|---|---|---|---|---|
Hole Dia. | Open Area | Hole Center-to-Center | Wd. | Max. Lg., ft. | 1-9 | 10-Up | |
Straight Holes | |||||||
0.016" Thick. (26 Gauge) | |||||||
0.016" | 30% | 0.026" | 24" | 50 | 0000000 | 000000 | 000000 |
0.02" | 20% | 0.03" | 24" | 50 | 0000000 | 00000 | 00000 |
0.024" | 23% | 0.044" | 24" | 50 | 0000000 | 00000 | 00000 |
0.027" | 23% | 0.05" | 24" | 50 | 0000000 | 00000 | 00000 |
0.033" | 28% | 0.055" | 24" | 50 | 0000000 | 00000 | 00000 |
0.038" | 45% | 0.05" | 24" | 50 | 0000000 | 00000 | 00000 |
0.04" | 29% | 0.066" | 24" | 50 | 0000000 | 00000 | 00000 |
0.045" | 37% | 0.066" | 24" | 50 | 0000000 | 00000 | 00000 |
0.057" | 34% | 0.086" | 24" | 50 | 0000000 | 00000 | 00000 |
0.065" | 33% | 0.1" | 24" | 50 | 0000000 | 00000 | 00000 |
0.079" | 41% | 0.11" | 24" | 50 | 0000000 | 00000 | 00000 |
0.103" | 48% | 0.132" | 24" | 50 | 0000000 | 00000 | 00000 |
0.138" | 43% | 0.188" | 24" | 50 | 0000000 | 00000 | 00000 |
Staggered Holes | |||||||
0.016" Thick. (26 Gauge) | |||||||
0.016" | 22% | 0.035" | 24" | 50 | 0000000 | 00000 | 00000 |
0.02" | 22% | 0.04" | 24" | 50 | 0000000 | 00000 | 00000 |
Strainers catch debris in your pipeline, preventing damage to valves, pumps, nozzles, and other sensitive equipment. They are designed for medium-pressure applications. Strainers have a threaded drain with a plug that provides access to the screen without disconnecting your line. They have good corrosion resistance.
Strainers for use with drinking water meet NSF/ANSI 61 safety standards for drinking water systems.
For technical drawings and 3-D models, click on a part number.
Strainers | Replacement Screens | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Thread Type | Max. Pressure | Lg. | Ht. | Plug Pipe Size | Material | Screen Material | Screen Mesh Size | Each | Each | ||
For Use With Drinking Water—NSF/ANSI 61 | ||||||||||||
1/2 | NPT | 400 psi @ 70° F | 2 3/4" | 2 3/4" | 1/4 | Brass | 304 Stainless Steel | 20 | 0000000 | 000000 | 0000000 | 000000 |
3/4 | NPT | 400 psi @ 70° F | 3 3/16" | 3 3/16" | 1/4 | Brass | 304 Stainless Steel | 20 | 0000000 | 00000 | 0000000 | 00000 |
1 | NPT | 400 psi @ 70° F | 3 3/4" | 3 3/4" | 1/2 | Brass | 304 Stainless Steel | 20 | 0000000 | 000000 | 0000000 | 00000 |
Use these strainers in medium-pressure applications to protect sensitive equipment from damage caused by debris. The screen is in the strainer body to save space. Strainers have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.