Use these metric washers to evenly distribute the load under bolt or screw heads and nuts when fastening. They can also act as spacers.

Choose these washers for their adherence to strict military standards for material and construction.

Flat and oval head screws sit flush within these washers for a neat, finished appearance.

To keep electrical connections intact, these washers retain wires so they won't slip out from under your screw head.

Teeth on the outside edge of the washer bite into the screw head and joint for a tight grip.

Internal teeth dig into the screw head while the smooth outside edge won't snag objects. Use with fasteners that have small heads, such as fillister and cheese head screws.

These curved, flexible washers act like springs to compensate for tolerance variations and uneven surfaces.

For a snug fit around a shaft, the ID of these shims is held to a tighter tolerance than other round shims.

Adjust spacing between bearings and other components on shafts. These shims are sized to fit the outer rim of a bearing.

Send us a drawing, and we'll cut your custom shim. Shims are made of layers of metal bonded with adhesive; remove layers with a utility knife until you get the thickness you need.

Choose the OD, ID, length, and material and we will accommodate your unique spacer needs.

An expanding rubber bushing damps vibration while holding panels together.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Handle heavy loads that frequently start and stop along shafts—these bearings contain extra iron and slippery PTFE lubricant. They’re thrust bearings, which means they support loads parallel to the shaft.

Made of 863 iron-copper and embedded with NSF registered H1 oil, these bearings can tackle high-load applications in food plants, such as bottling and filling lines.

These bronze bearings are strong, wear resistant, and excellent at handling shock loads.

The extended neck on the washer of these grommets adds reinforcement so you can use them in thicker material such as woven fabrics. Press them into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Kits include grommets, a cutting punch, a cutting block, an installation punch, and a die set. Use them to create a way to run rope and cable through tarps, covers, and curtains.

Use these guns to clean as well as apply chemicals and solvents.

Clean hard-to-access areas by extending the reach of your quick-disconnect wash gun.

Metal scrubbers are flexible and corrosion resistant for your toughest cleaning jobs.

The handle makes it easy to brush by hand. Clean delicate surfaces inside tubes, pipes, and holes.

Attach the shank to a handle or power tool.

Clean delicate surfaces inside tubes, pipes, and holes.

Turn the handle to expose more bristles as they wear.

Use two types of bristles on one brush to remove light-to-medium rust and stains and small burs.

Removable bands around the bristles keep them from flaring and breaking. Adjust the bands to change bristle length.

Use on delicate surfaces.

Use on delicate surfaces.

Use on delicate surfaces.

Attach to your blowgun to direct airflow.

The extra length allows access into hard-to-reach areas.

Blow debris and sweep it away with the built-in brush.

These guns include a rubber tip that won't damage your workpiece.