Inside Width Inside Width |
|---|
|
|
|
Inside Height Inside Height |
|---|
|
|
|
Hardness Rating Hardness Rating |
|---|
|
Hardness Hardness |
|---|
|
Tolerance Rating Tolerance Rating |
|---|
|
Appearance Appearance |
|---|
 | Plain |
Density Density |
|---|
|
Yield Strength Yield Strength |
|---|
|
Certificate Certificate |
|---|
 | |
Melting Point Temperature Melting Point Temperature |
|---|
|
Fabrication Fabrication |
|---|
|
Surface Resistivity Surface Resistivity |
|---|
|
Thermal Conductivity Thermal Conductivity |
|---|
|
About Copper, Brass, and Bronze
More
Easy-to-Machine Architectural 385 Brass Bars
- Yield Strength: 16,000 psi
- Hardness: Rockwell B40 (Soft)
- Temper: See table
- Heat Treatable: No
- Specifications Met: ASTM B455
Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Wd. | Temper | 2 ft. Lg. | 4 ft. Lg. | 6 ft. Lg. | |
1/8" Thick. (-0.01" to 0.01" Tolerance) | |||||
|---|---|---|---|---|---|
| 1/2" | H02 (1/2 Hard) | 0000000 | |||
| 3/4" | H02 (1/2 Hard) | 0000000 | |||
| 1" | H02 (1/2 Hard) | 0000000 | |||
| 1 1/4" | Not Rated | 0000000 | |||
| 1 1/2" | H02 (1/2 Hard) | 0000000 | |||
| 2" | H02 (1/2 Hard) | 0000000 | |||
3/16" Thick. (-0.01" to 0.01" Tolerance) | |||||
| 1" | H02 (1/2 Hard) | 0000000 | |||
1/4" Thick. (-0.045" to 0.045" Tolerance) | |||||
| 1/4" | H02 (1/2 Hard) | 0000000 | |||
1/4" Thick. (-0.01" to 0.01" Tolerance) | |||||
| 1/2" | H02 (1/2 Hard) | 0000000 | |||
| 1" | H02 (1/2 Hard) | 0000000 | |||
| 1 1/2" | H02 (1/2 Hard) | 0000000 | |||
| 2" | H02 (1/2 Hard) | 0000000 | |||
| 3" | H02 (1/2 Hard) | 0000000 | |||
3/8" Thick. (-0.01" to 0.01" Tolerance) | |||||
| 1/2" | H02 (1/2 Hard) | 0000000 | |||
| 3/4" | H02 (1/2 Hard) | 0000000 | |||
| 1" | H02 (1/2 Hard) | 0000000 | |||
| 2" | H02 (1/2 Hard) | 0000000 | |||
1/2" Thick. (-0.01" to 0.01" Tolerance) | |||||
| 1/2" | H02 (1/2 Hard) | 0000000 | |||
| 3/4" | H02 (1/2 Hard) | 0000000 | |||
| 1" | H02 (1/2 Hard) | 0000000 | |||
| 2" | H02 (1/2 Hard) | 0000000 | |||
3/4" Thick. (-0.01" to 0.01" Tolerance) | |||||
| 3/4" | H02 (1/2 Hard) | 0000000 | |||
| 1" | H02 (1/2 Hard) | 0000000 | |||
1" Thick. (-0.01" to 0.01" Tolerance) | |||||
| 1" | H02 (1/2 Hard) | 0000000 | |||
Easy-to-Machine Architectural 385 Brass 90° Angles
- Yield Strength: 16,000 psi
- Hardness: Rockwell B40 (Soft)
- Temper:
1/16" wall thick.: M30
All other sizes: H02 (1/2 Hard) - Heat Treatable: No
- Specifications Met: ASTM B455
Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Outside | Inside | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | 2 ft. Lg. | 4 ft. Lg. | 6 ft. Lg. | |
1/16" Wall Thick. (-0.0006" to 0.0006" Tolerance) | |||||||||
| 3/4" | -0.008" to 0.008" | 3/4" | -0.008" to 0.008" | 11/16" | 11/16" | 0000000 | |||
1/8" Wall Thick. (-0.0013" to 0.0013" Tolerance) | |||||||||
| 1/2" | -0.005" to 0.005" | 1/2" | -0.005" to 0.005" | 3/8" | 3/8" | 0000000 | |||
| 3/4" | -0.008" to 0.008" | 3/4" | -0.008" to 0.008" | 5/8" | 5/8" | 0000000 | |||
| 1" | -0.01" to 0.01" | 3/4" | -0.008" to 0.008" | 7/8" | 5/8" | 0000000 | |||
| 1" | -0.01" to 0.01" | 1" | -0.01" to 0.01" | 7/8" | 7/8" | 0000000 | |||
| 1 1/4" | -0.013" to 0.013" | 1 1/4" | -0.013" to 0.013" | 1 1/8" | 1 1/8" | 0000000 | |||
| 1 1/2" | -0.015" to 0.015" | 1 1/2" | -0.015" to 0.015" | 1 3/8" | 1 3/8" | 0000000 | |||
| 2" | -0.02" to 0.02" | 2" | -0.02" to 0.02" | 1 7/8" | 1 7/8" | 0000000 | |||
3/16" Wall Thick. (-0.0019" to 0.0019" Tolerance) | |||||||||
| 1" | -0.01" to 0.01" | 1" | -0.01" to 0.01" | 13/16" | 13/16" | 0000000 | |||
| 1 1/4" | -0.013" to 0.013" | 1 1/4" | -0.013" to 0.013" | 1 1/16" | 1 1/16" | 0000000 | |||
| 1 1/2" | -0.015" to 0.015" | 1 1/2" | -0.015" to 0.015" | 1 5/16" | 1 5/16" | 0000000 | |||
| 2" | -0.02" to 0.02" | 2" | -0.02" to 0.02" | 1 13/16" | 1 13/16" | 0000000 | |||
1/4" Wall Thick. (-0.0025" to 0.0025" Tolerance) | |||||||||
| 1 1/2" | -0.015" to 0.015" | 1 1/2" | -0.015" to 0.015" | 1 1/4" | 1 1/4" | 0000000 | |||
| 2" | -0.02" to 0.02" | 2" | -0.02" to 0.02" | 1 3/4" | 1 3/4" | 0000000 | |||
| 3" | -0.03" to 0.03" | 3" | -0.03" to 0.03" | 2 3/4" | 2 3/4" | 0000000 | |||
Easy-to-Machine Architectural 385 Brass Rods
- Yield Strength:
Inch sizes: 16,000 psi
Metric sizes: 60,000 psi - Hardness:
Inch sizes: Rockwell B40 (Soft)
Metric sizes: Rockwell B55 (Soft) - Temper:
Inch sizes: H02 (1/2 Hard)
Metric sizes: 1/2 Hard - Heat Treatable: No
- Specifications Met:
Inch sizes: ASTM B455
Metric Sizes: European Standard EN 12164
Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
1 m Lg. | ||||
|---|---|---|---|---|
| Dia., mm | Dia. Tolerance Range, mm | Straightness Tolerance | Each | |
| 2 | -0.05 | .4 mm per 400 mm | 0000000 | 00000 |
| 3 | -0.05 | .4 mm per 400 mm | 0000000 | 0000 |
| 4 | -0.05 | .4 mm per 400 mm | 0000000 | 00000 |
| 5 | -0.05 | .4 mm per 400 mm | 0000000 | 00000 |
| 6 | -0.05 | .4 mm per 400 mm | 0000000 | 00000 |
| 8 | -0.08 | .4 mm per 400 mm | 0000000 | 00000 |
| 10 | -0.08 | .4 mm per 400 mm | 0000000 | 00000 |
| 20 | -0.08 | .4 mm per 400 mm | 0000000 | 000000 |
Easy-to-Machine Architectural 385 Brass U-Channels
- Yield Strength: 16,000 psi
- Hardness: Rockwell B40 (Soft)
- Temper: H02 (1/2 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B455
Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Outside | Inside | |||||||
|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | 4 ft. Lg. | 6 ft. Lg. | |
0.093" Wall Thick. (-0.0009" to 0.0009" Tolerance) | ||||||||
| 1/2" | -0.005" to 0.005" | 1/2" | -0.005" to 0.005" | 0.407" | 0.314" | 0000000 | ||
| 3/4" | -0.008" to 0.008" | 1/2" | -0.005" to 0.005" | 0.657" | 0.314" | 0000000 | ||
1/8" Wall Thick. (-0.0013" to 0.0013" Tolerance) | ||||||||
| 3/4" | -0.008" to 0.008" | 3/4" | -0.008" to 0.008" | 5/8" | 1/2" | 0000000 | ||
| 1" | -0.001" to 0.001" | 1" | -0.001" to 0.001" | 7/8" | 3/4" | 0000000 | ||
| 1 1/4" | -0.001" to 0.001" | 1 1/4" | -0.001" to 0.001" | 1 1/8" | 1" | 0000000 | ||