Search Results
For Shaft Diameter For Shaft Diameter |
|---|
|
|
|
OD OD |
|---|
ID ID |
|---|
For Housing ID For Housing ID |
|---|
|
|
|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity |
|---|
For Load Direction For Load Direction |
|---|
 | Radial |
 | Combined Radial and Thrust |
 | Thrust |
Lubrication Lubrication |
|---|
|
Dynamic Thrust Load Capacity Dynamic ThrustLoad Capacity |
|---|
|
About Plain Bearings
More
Corrosion-Resistant Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | ||||||
|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||
| 5/16" | 1/4" | 280 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 5/16" | 1/2" | 560 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 3/8" | 1/4" | 280 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 3/8" | 3/8" | 420 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 3/8" | 1/2" | 560 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 3/8" | 1" | 1,100 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 00000 |
For 3/8" Shaft Dia. | ||||||
| 1/2" | 1/4" | 420 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1/2" | 3/8" | 630 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1/2" | 1/2" | 840 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1/2" | 3/4" | 1,250 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1/2" | 1" | 1,650 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
For 1/2" Shaft Dia. | ||||||
| 5/8" | 3/8" | 840 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 5/8" | 1/2" | 1,100 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 5/8" | 3/4" | 1,650 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 5/8" | 1" | 2,250 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 5/8" | 1 1/2" | 3,350 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 3/4" | 1/2" | 1,100 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 3/4" | 3/4" | 1,650 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 3/4" | 1" | 2,250 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
For 5/8" Shaft Dia. | ||||||
| 3/4" | 1" | 2,800 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
For 3/4" Shaft Dia. | ||||||
| 1" | 3/4" | 2,500 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1" | 1" | 3,350 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1" | 2" | 6,750 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
For 7/8" Shaft Dia. | ||||||
| 1" | 1 1/2" | 5,900 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
For 1" Shaft Dia. | ||||||
| 1 1/8" | 1" | 4,500 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1 1/4" | 3/4" | 3,350 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1 1/4" | 2" | 9,000 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1 1/4" | 3" | 13,500 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
For 1 1/8" Shaft Dia. | ||||||
| 1 3/8" | 4" | 20,250 lbs. @ 30 rpm | Required | -350° to 500° | 0000000 | 00000 |
Corrosion-Resistant Sleeve Bearings with Groove
Grooves on the inside of the bearing provide a flow path for lubricant, distributing it evenly along the bearing’s surface. The addition of iron and aluminum provides high strength and excellent corrosion resistance.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | ||||||
|---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | ||||||
| 5/8" | 3/8" | 730 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 000000 |
| 5/8" | 1/2" | 970 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 5/8" | 3/4" | 1,450 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 5/8" | 1" | 1,950 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 5/8" | 1 1/2" | 2,900 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 3/4" | 1/2" | 970 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 3/4" | 3/4" | 1,450 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 3/4" | 1" | 1,950 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 00000 |
For 5/8" Shaft Dia. | ||||||
| 3/4" | 1" | 2,400 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
For 3/4" Shaft Dia. | ||||||
| 1" | 3/4" | 2,150 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 1" | 1" | 2,900 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 1" | 1 1/2" | 4,350 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 1" | 2" | 5,850 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
For 7/8" Shaft Dia. | ||||||
| 1" | 1 1/2" | 5,100 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
For 1" Shaft Dia. | ||||||
| 1 1/8" | 1" | 3,900 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 1 1/4" | 3/4" | 2,900 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 1 1/4" | 1" | 3,900 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 1 1/4" | 1 1/2" | 5,850 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 1 1/4" | 2" | 7,800 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
For 1 1/4" Shaft Dia. | ||||||
| 1 1/2" | 1 1/2" | 7,300 lbs. @ 30 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 1 1/2" | 2" | 9,750 lbs. @ 30 rpm | Required | -350° to 500° | 0000000 | 00000 |
For 1 1/2" Shaft Dia. | ||||||
| 1 3/4" | 1 1/2" | 8,750 lbs. @ 30 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 1 3/4" | 2" | 11,700 lbs. @ 30 rpm | Required | -350° to 500° | 0000000 | 00000 |
For 1 3/4" Shaft Dia. | ||||||
| 1 7/8" | 1 1/2" | 10,200 lbs. @ 30 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 1 7/8" | 2" | 13,650 lbs. @ 30 rpm | Required | -350° to 500° | 0000000 | 00000 |
For 2" Shaft Dia. | ||||||
| 2 1/4" | 2" | 15,600 lbs. @ 30 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 2 1/4" | 2 1/2" | 19,500 lbs. @ 30 rpm | Required | -350° to 500° | 0000000 | 00000 |
High-Temperature Dry-Running Sleeve Bearings
Grooved
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
954 aluminum-bronze bearings have high strength and excellent corrosion resistance, making them suitable for use in marine and mining applications.
Grooved bearings have a graphite-filled groove on the inside of the bearing that distributes lubricant evenly along the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication Method | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | ||||||
|---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | ||||||
| 5/8" | 3/8" | 730 lbs. @ 120 rpm | Grooved | -350° to 500° | 0000000 | 000000 |
| 5/8" | 1/2" | 970 lbs. @ 120 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
| 5/8" | 3/4" | 1,450 lbs. @ 120 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
| 5/8" | 1" | 1,950 lbs. @ 120 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
| 5/8" | 1 1/2" | 2,900 lbs. @ 120 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
| 3/4" | 1/2" | 970 lbs. @ 120 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
| 3/4" | 3/4" | 1,450 lbs. @ 120 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
| 3/4" | 1" | 1,950 lbs. @ 120 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
For 3/4" Shaft Dia. | ||||||
| 1" | 3/4" | 2,150 lbs. @ 60 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
| 1" | 1" | 2,900 lbs. @ 60 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
| 1" | 1 1/2" | 4,350 lbs. @ 60 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
| 1" | 2" | 5,850 lbs. @ 60 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
For 1" Shaft Dia. | ||||||
| 1 1/4" | 3/4" | 2,900 lbs. @ 60 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
| 1 1/4" | 1" | 3,900 lbs. @ 60 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
| 1 1/4" | 1 1/2" | 5,850 lbs. @ 60 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
| 1 1/4" | 2" | 7,800 lbs. @ 60 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
For 1 1/4" Shaft Dia. | ||||||
| 1 1/2" | 1 1/2" | 7,300 lbs. @ 30 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
| 1 1/2" | 2" | 9,750 lbs. @ 30 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
For 1 1/2" Shaft Dia. | ||||||
| 1 3/4" | 1 1/2" | 8,750 lbs. @ 30 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
| 1 3/4" | 1 3/4" | 10,200 lbs. @ 30 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
| 1 3/4" | 2" | 11,700 lbs. @ 30 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
For 1 3/4" Shaft Dia. | ||||||
| 2" | 1 1/2" | 10,200 lbs. @ 30 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
| 2" | 2" | 13,650 lbs. @ 30 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
For 2" Shaft Dia. | ||||||
| 2 1/4" | 2" | 15,600 lbs. @ 30 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
| 2 1/4" | 2 1/2" | 19,500 lbs. @ 30 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
Corrosion-Resistant Flanged Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 3/16" Shaft Dia. | |||||||||
| 5/16" | 1/2" | 7/16" | 1/16" | 420 lbs. @ 120 rpm | 550 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 00000 |
For 1/4" Shaft Dia. | |||||||||
| 3/8" | 1/4" | 1/2" | 1/16" | 280 lbs. @ 120 rpm | 660 lbs. @ 120 rpm | Required | -350° to 500° | 000000 | 0000 |
| 3/8" | 3/8" | 1/2" | 1/16" | 420 lbs. @ 120 rpm | 660 lbs. @ 120 rpm | Required | -350° to 500° | 000000 | 0000 |
| 3/8" | 1/2" | 1/2" | 1/16" | 560 lbs. @ 120 rpm | 660 lbs. @ 120 rpm | Required | -350° to 500° | 000000 | 0000 |
| 3/8" | 3/4" | 1/2" | 1/16" | 840 lbs. @ 120 rpm | 660 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
For 5/16" Shaft Dia. | |||||||||
| 7/16" | 3/8" | 9/16" | 1/16" | 520 lbs. @ 120 rpm | 770 lbs. @ 120 rpm | Required | -350° to 500° | 000000 | 0000 |
| 7/16" | 1/2" | 9/16" | 1/16" | 700 lbs. @ 120 rpm | 770 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 7/16" | 3/4" | 9/16" | 1/16" | 1,050 lbs. @ 120 rpm | 770 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 9/16" | 1/2" | 11/16" | 1/16" | 700 lbs. @ 120 rpm | 1,300 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 9/16" | 3/4" | 11/16" | 1/16" | 1,050 lbs. @ 120 rpm | 1,300 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 5/8" | 3/4" | 7/8" | 1/8" | 1,050 lbs. @ 120 rpm | 2,350 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
For 3/8" Shaft Dia. | |||||||||
| 1/2" | 1/4" | 11/16" | 1/16" | 420 lbs. @ 120 rpm | 1,150 lbs. @ 120 rpm | Required | -350° to 500° | 000000 | 0000 |
| 1/2" | 1/2" | 5/8" | 1/16" | 840 lbs. @ 120 rpm | 880 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1/2" | 1/2" | 11/16" | 1/16" | 840 lbs. @ 120 rpm | 1,150 lbs. @ 120 rpm | Required | -350° to 500° | 000000 | 0000 |
| 1/2" | 3/4" | 11/16" | 1/16" | 1,250 lbs. @ 120 rpm | 1,150 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 5/8" | 1/2" | 7/8" | 1/16" | 840 lbs. @ 120 rpm | 2,200 lbs. @ 120 rpm | Required | -350° to 500° | 000000 | 0000 |
| 5/8" | 3/4" | 7/8" | 1/16" | 1,250 lbs. @ 120 rpm | 2,200 lbs. @ 120 rpm | Required | -350° to 500° | 000000 | 00000 |
| 5/8" | 1" | 7/8" | 1/16" | 1,650 lbs. @ 120 rpm | 2,200 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 00000 |
For 7/16" Shaft Dia. | |||||||||
| 9/16" | 1/2" | 11/16" | 1/16" | 980 lbs. @ 120 rpm | 990 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 9/16" | 3/4" | 11/16" | 1/16" | 1,450 lbs. @ 120 rpm | 990 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 5/8" | 3/4" | 7/8" | 1/8" | 1,450 lbs. @ 120 rpm | 2,000 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
For 1/2" Shaft Dia. | |||||||||
| 5/8" | 3/8" | 7/8" | 1/8" | 840 lbs. @ 120 rpm | 1,800 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 5/8" | 1/2" | 7/8" | 1/8" | 1,100 lbs. @ 120 rpm | 1,800 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 5/8" | 3/4" | 7/8" | 1/8" | 1,650 lbs. @ 120 rpm | 1,800 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 5/8" | 1" | 7/8" | 1/8" | 2,250 lbs. @ 120 rpm | 1,800 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 3/4" | 1/2" | 1" | 1/8" | 1,100 lbs. @ 120 rpm | 2,300 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 3/4" | 3/4" | 1" | 1/8" | 1,650 lbs. @ 120 rpm | 2,300 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 3/4" | 1" | 1" | 1/8" | 2,250 lbs. @ 120 rpm | 2,300 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
For 5/8" Shaft Dia. | |||||||||
| 3/4" | 5/8" | 1" | 1/8" | 1,750 lbs. @ 60 rpm | 2,150 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 3/4" | 3/4" | 1" | 1/8" | 2,100 lbs. @ 60 rpm | 2,150 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 3/4" | 1" | 1" | 1/8" | 2,800 lbs. @ 60 rpm | 2,150 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 7/8" | 1/2" | 1 1/8" | 1/8" | 1,400 lbs. @ 60 rpm | 3,050 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 7/8" | 5/8" | 1 1/8" | 1/8" | 1,750 lbs. @ 60 rpm | 3,050 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 7/8" | 3/4" | 1 1/8" | 1/8" | 2,100 lbs. @ 60 rpm | 3,050 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 7/8" | 1" | 1 1/8" | 1/8" | 2,800 lbs. @ 60 rpm | 3,050 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 7/8" | 1 1/4" | 1 1/8" | 1/8" | 3,500 lbs. @ 60 rpm | 3,050 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 7/8" | 1 1/4" | 1 1/4" | 1/8" | 3,500 lbs. @ 60 rpm | 4,100 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
For 3/4" Shaft Dia. | |||||||||
| 7/8" | 1/2" | 1 1/8" | 1/8" | 1,650 lbs. @ 60 rpm | 2,450 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 7/8" | 1/2" | 1 1/4" | 1/8" | 1,650 lbs. @ 60 rpm | 3,500 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 7/8" | 3/4" | 1 1/8" | 1/8" | 2,500 lbs. @ 60 rpm | 2,450 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 7/8" | 3/4" | 1 1/4" | 1/8" | 2,500 lbs. @ 60 rpm | 3,500 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1" | 5/8" | 1 1/4" | 3/16" | 2,100 lbs. @ 60 rpm | 3,500 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1" | 3/4" | 1 1/4" | 3/16" | 2,500 lbs. @ 60 rpm | 3,500 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1" | 1" | 1 1/4" | 3/16" | 3,350 lbs. @ 60 rpm | 3,500 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1" | 1 1/4" | 1 1/4" | 3/16" | 4,200 lbs. @ 60 rpm | 3,500 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
For 7/8" Shaft Dia. | |||||||||
| 1 1/8" | 3/4" | 1 1/2" | 1/8" | 2,950 lbs. @ 60 rpm | 5,200 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 1 1/8" | 1" | 1 1/2" | 1/8" | 3,900 lbs. @ 60 rpm | 5,200 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 1 1/8" | 1 1/4" | 1 1/2" | 1/8" | 4,900 lbs. @ 60 rpm | 5,200 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
For 1" Shaft Dia. | |||||||||
| 1 1/4" | 3/4" | 1 1/2" | 1/8" | 3,350 lbs. @ 60 rpm | 4,400 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1 1/4" | 1" | 1 1/2" | 1/8" | 4,500 lbs. @ 60 rpm | 4,400 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1 1/4" | 1 1/4" | 1 1/2" | 1/8" | 5,600 lbs. @ 60 rpm | 4,400 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 1 1/4" | 1 1/2" | 1 1/2" | 1/8" | 6,750 lbs. @ 60 rpm | 4,400 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
For 1 1/4" Shaft Dia. | |||||||||
| 1 1/2" | 1" | 1 3/4" | 3/16" | 5,600 lbs. @ 30 rpm | 5,300 lbs. @ 30 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 1 1/2" | 1 1/4" | 1 3/4" | 3/16" | 7,000 lbs. @ 30 rpm | 5,300 lbs. @ 30 rpm | Required | -350° to 500° | 0000000 | 00000 |
| 1 1/2" | 1 1/2" | 1 3/4" | 3/16" | 8,400 lbs. @ 30 rpm | 5,300 lbs. @ 30 rpm | Required | -350° to 500° | 0000000 | 00000 |
For 1 3/8" Shaft Dia. | |||||||||
| 1 5/8" | 1" | 2" | 1/8" | 6,150 lbs. @ 30 rpm | 7,450 lbs. @ 30 rpm | Required | -350° to 500° | 0000000 | 00000 |
For 1 1/2" Shaft Dia. | |||||||||
| 1 3/4" | 1 1/2" | 2" | 3/16" | 10,100 lbs. @ 30 rpm | 6,150 lbs. @ 30 rpm | Required | -350° to 500° | 0000000 | 00000 |
For 1 3/4" Shaft Dia. | |||||||||
| 2 1/4" | 2 1/2" | 3" | 1/4" | 19,650 lbs. @ 30 rpm | 20,950 lbs. @ 30 rpm | Required | -350° to 500° | 0000000 | 00000 |
Corrosion-Resistant Thrust Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| OD | Thick. | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | ||||||
|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||
| 5/8" | 1/16" | 1,150 lbs. @ 120 rpm | Required | -350° to 500° | 000000 | 00000 |
For 3/8" Shaft Dia. | ||||||
| 3/4" | 1/16" | 1,450 lbs. @ 120 rpm | Required | -350° to 500° | 000000 | 0000 |
| 3/4" | 1/8" | 1,450 lbs. @ 120 rpm | Required | -350° to 500° | 000000 | 0000 |
For 1/2" Shaft Dia. | ||||||
| 3/4" | 1/16" | 1,100 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 7/8" | 3/16" | 1,800 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1" | 1/16" | 2,300 lbs. @ 120 rpm | Required | -350° to 500° | 000000 | 0000 |
| 1" | 3/32" | 2,300 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1" | 1/8" | 2,300 lbs. @ 120 rpm | Required | -350° to 500° | 000000 | 0000 |
For 9/16" Shaft Dia. | ||||||
| 1 1/4" | 1/16" | 4,400 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1 1/4" | 1/8" | 4,400 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
For 5/8" Shaft Dia. | ||||||
| 1" | 1/16" | 2,150 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1" | 1/8" | 2,150 lbs. @ 60 rpm | Required | -350° to 500° | 000000 | 00000 |
| 1 3/16" | 1/16" | 3,600 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1 3/16" | 3/32" | 3,600 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1 3/16" | 1/8" | 3,600 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1 1/4" | 1/16" | 4,100 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
For 3/4" Shaft Dia. | ||||||
| 1 1/4" | 1/16" | 3,500 lbs. @ 60 rpm | Required | -350° to 500° | 000000 | 0000 |
| 1 1/4" | 1/8" | 3,500 lbs. @ 60 rpm | Required | -350° to 500° | 000000 | 0000 |
| 1 3/8" | 1/8" | 4,650 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1 9/16" | 3/32" | 6,600 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1 3/4" | 1/8" | 8,800 lbs. @ 60 rpm | Required | -350° to 500° | 000000 | 0000 |
For 7/8" Shaft Dia. | ||||||
| 1 1/2" | 1/16" | 5,200 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1 1/2" | 1/8" | 5,200 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
For 1" Shaft Dia. | ||||||
| 1 1/2" | 1/16" | 4,400 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 1 1/2" | 1/8" | 4,400 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 2" | 1/8" | 9,350 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 2 7/8" | 1/8" | 15,750 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
For 1 1/4" Shaft Dia. | ||||||
| 2" | 1/8" | 8,600 lbs. @ 30 rpm | Required | -350° to 500° | 0000000 | 00000 |
For 1 1/2" Shaft Dia. | ||||||
| 2 1/2" | 1/8" | 14,100 lbs. @ 30 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 3 1/2" | 3/16" | 35,300 lbs. @ 30 rpm | Required | -350° to 500° | 0000000 | 00000 |
For 1 3/4" Shaft Dia. | ||||||
| 2 7/16" | 1/8" | 10,150 lbs. @ 30 rpm | Required | -350° to 500° | 0000000 | 0000 |
| 2 5/8" | 1/8" | 13,500 lbs. @ 30 rpm | Required | -350° to 500° | 0000000 | 00000 |
For 2" Shaft Dia. | ||||||
| 3" | 1/8" | 17,650 lbs. @ 30 rpm | Required | -350° to 500° | 0000000 | 00000 |