These rods are precision ground for a tight diameter tolerance of ±0.0005".

Powdered bronze is pressed and then impregnated with SAE 30 oil to make this material self-lubricating.

954 bronze contains a minimum of 10% aluminum for strength and weldability. It is also known as aluminum bronze. It's widely used for bearings, bushings, valve bodies, and worm gears.

Frequently called manganese brass, 863 bronze can handle heavy loads and high speeds when properly lubricated.

For a good combination of strength, machinability, and weldability, choose 955 bronze.

Also known as leaded commercial bronze, 316 contains lead for good machinability.

Commonly called silicon-bronze, 655 bronze contains more silicon than other bronze alloys, making it suitable for all types of welding.

The heavy duty construction provides more support than standard discs for heavy material removal.

Fit these discs over your tool's arbor to sand aluminum, soft metals, and nonmetals.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

Holes allow dust removal when used with a vacuum sander.

With more flaps than standard discs, these last 30-40% longer.

A blend of cotton laminate and aluminum oxide creates a smoother surface than other grinding wheels with similar grits. Wheels are also known as Type 27 wheels and raised-hub wheels.

Unlike aluminum oxide wheels, these silicon carbide wheels won’t clog when grinding soft metals.

Use these wheels for light grinding, deburring, and sharpening.

The silicon carbide abrasive in these wheels is suspended in rubber for a cushioned grind with light material removal.

Bits thread onto mounted shanks so you can quickly switch head shapes without removing the shank. The abrasive grains are blended with rubber, which cushions during grinding to produce a smoother surface texture than other bits with similar grits.

The abrasive grains in these bits are blended with rubber, which cushions during grinding to produce a smoother surface texture than other bits with similar grits.

The small 3/32" diameter shank and small head makes these bits good for precise and intricate jobs.

This film abrades quickly and prevents material buildup.

These curved, flexible washers act like springs to compensate for tolerance variations and uneven surfaces.