Search Results
    Material
    Material
    Bronze
    Brass
    Tolerance Rating
    Tolerance Rating
    Oversized
    Standard
    Tight
    Elongation
    Elongation
    1%
    10%
    12%
    15%
    18%
    Melting Point Temperature
    Melting Point Temperature
    1550° F
    1570° F
    1610° F
    1800° F
    1880° F
    Temper
    Temper
    M07
    H02
    Not Rated
    Fabrication
    Fabrication
    Cast
    Pressed
    Cold Worked
    Heat Treatable
    Heat Treatable
    Yes
    No
    Modulus of Elasticity
    Modulus of Elasticity
    11.0 ksi × 103
    14.0 ksi × 103
    14.5 ksi × 103
    15.5 ksi × 103
    Surface Resistivity
    Surface Resistivity
    37 Ohms
    80.2 Ohms
    Hardness Rating
    Hardness Rating
    Soft
    Medium
    Not Rated
    Temper Rating
    Temper Rating
    1/2 Hard
    Not Rated
    Filler Material
    Filler Material
    Oil
    SAE 30 Oil
    Specifications Met
    Specifications Met
    ASTM B505
    ASTM B438
    ASTM B455
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    162 Products

    Oversized Weldable 954 Bearing Bronze Bars

    Wd.Straightness
    Tolerance 1/2
    ft.
    Lg.1 ft.
    Lg.2 ft.
    Lg.3 ft.
    Lg.6 ft.
    Lg.
    1/4" Thick. (0.067" to 0.142" Tolerance)
    3/8" Thick. (0.067" to 0.142" Tolerance)
    1/2" Thick. (0.067" to 0.142" Tolerance)
    5/8" Thick. (0.067" to 0.142" Tolerance)
    3/4" Thick. (0.067" to 0.142" Tolerance)
    1" Thick. (0.067" to 0.142" Tolerance)
    1 1/4" Thick. (0.067" to 0.142" Tolerance)
    1 1/2" Thick. (0.067" to 0.142" Tolerance)
    2" Thick. (0.067" to 0.142" Tolerance)
    3" Thick. (0.067" to 0.142" Tolerance)

    Tight-Tolerance Weldable 954 Bearing Bronze Bars

    Oil-Filled 840 and 841 Bearing Bronze Sheets

    Oversized 932 Bearing Bronze Bars

    Wd.Straightness
    ToleranceNonsparking
    Properties 1 ft. Lg.3 ft. Lg.
    1/4" Thick. (0.078" to 0.156" Tolerance)
    3/8" Thick. (0.078" to 0.156" Tolerance)
    1/2" Thick. (0.078" to 0.156" Tolerance)
    5/8" Thick. (0.078" to 0.156" Tolerance)
    3/4" Thick. (0.078" to 0.156" Tolerance)
    1" Thick. (0.078" to 0.156" Tolerance)
    1 1/4" Thick. (0.078" to 0.156" Tolerance)
    1 1/2" Thick. (0.078" to 0.156" Tolerance)
    1 3/4" Thick. (0.078" to 0.156" Tolerance)

    Tight-Tolerance 932 Bearing Bronze Bars

    Wd.Mechanical FinishNonsparking
    Properties 1 ft. Lg.2 ft. Lg.
    1/4" Thick. (-0.002" to 0.002" Tolerance)
    3/8" Thick. (-0.002" to 0.002" Tolerance)
    1/2" Thick. (-0.002" to 0.002" Tolerance)
    5/8" Thick. (-0.002" to 0.002" Tolerance)
    3/4" Thick. (-0.002" to 0.002" Tolerance)
    1" Thick. (-0.002" to 0.002" Tolerance)

    Easy-to-Machine 936 Bearing Bronze Bars

    Wd.Flatness
    Tolerance 1 ft. Lg.3 ft. Lg.
    1/4" Thick. (0" to 1/8" Tolerance)
    3/8" Thick. (0" to 1/8" Tolerance)
    1/2" Thick. (0" to 1/8" Tolerance)
    5/8" Thick. (0" to 1/8" Tolerance)
    3/4" Thick. (0" to 1/8" Tolerance)
    1" Thick. (0" to 1/8" Tolerance)
    1 1/4" Thick. (0" to 1/8" Tolerance)
    2" Thick. (0" to 1/8" Tolerance)

    Easy-to-Machine Architectural 385 Brass Bars

    Wd.Temper 2 ft.
    Lg.4 ft.
    Lg.6 ft.
    Lg.
    1/4" Thick. (-0.01" to 0.01" Tolerance)
    3/8" Thick. (-0.01" to 0.01" Tolerance)
    1/2" Thick. (-0.01" to 0.01" Tolerance)
    3/4" Thick. (-0.01" to 0.01" Tolerance)

    Self-Lubricating Wear Plates