Yield Strength Yield Strength |
|---|
|
Hardness Rating Hardness Rating |
|---|
|
|
Filler Material Filler Material |
|---|
|
Hardness Hardness |
|---|
|
Specifications Met Specifications Met |
|---|
|
Density Density |
|---|
|
About Copper, Brass, and Bronze
More
About Durometer Hardness Scales
More
Tight-Tolerance Weldable 954 Bearing Bronze Bars
- Yield Strength: 32,000 psi
- Hardness: Rockwell B95 (Medium)
- Temper: M07
- Heat Treatable: Yes
- Specifications Met: ASTM B505
These bars are precision ground on the top and bottom for a tight thickness tolerance of ±0.002". 954 bronze contains a minimum of 10% aluminum for strength and weldability. It is also known as aluminum bronze. It's widely used for bearings, bushings, valve bodies, and worm gears.
1 ft. Lg. | ||||
|---|---|---|---|---|
| Wd. | Mechanical Finish | Flatness Tolerance | Each | |
1/4" Thick. (-0.002" to 0.002" Tolerance) | ||||
| 1" | Precision Ground | 0.01" | 0000000 | 000000 |
| 2" | Precision Ground | 0.01" | 0000000 | 00000 |
| 3" | Precision Ground | 0.01" | 0000000 | 00000 |
3/8" Thick. (-0.002" to 0.002" Tolerance) | ||||
| 1" | Precision Ground | 0.01" | 0000000 | 00000 |
| 2" | Precision Ground | 0.01" | 0000000 | 00000 |
| 3" | Precision Ground | 0.01" | 0000000 | 00000 |
1/2" Thick. (-0.002" to 0.002" Tolerance) | ||||
| 1" | Precision Ground | 0.01" | 0000000 | 00000 |
| 2" | Precision Ground | 0.01" | 0000000 | 00000 |
| 3" | Precision Ground | 0.01" | 0000000 | 000000 |
3/4" Thick. (-0.002" to 0.002" Tolerance) | ||||
| 1" | Precision Ground | 0.01" | 0000000 | 00000 |
| 2" | Precision Ground | 0.01" | 0000000 | 00000 |
| 3" | Precision Ground | 0.01" | 0000000 | 000000 |
Oil-Filled 840 and 841 Bearing Bronze Sheets
- Yield Strength:
840 Bearing Bronze: 7,000 psi
841 Bearing Bronze: 11,000 psi - Hardness: Not Rated
- Temper: Not Rated
- Heat Treatable: No
- Specifications Met: ASTM B438
Powdered bronze is pressed and then impregnated with SAE 30 oil to make this material self-lubricating. Use it to make bearings and parts for hard-to-reach areas that would be difficult to access for lubrication, such as well pumps and turbine blades.
| Thick. | Thick. Tolerance Range | Material | Each | |
5" × 6" | ||||
|---|---|---|---|---|
| 1/8" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 000000 |
| 3/16" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 00000 |
| 1/4" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 00000 |
| 3/8" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 00000 |
| 1/2" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 000000 |
| 5/8" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 000000 |
| 3/4" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 000000 |
| 1" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 000000 |
6" × 12" | ||||
| 1/8" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 000000 |
| 3/16" | -0.01" to 0.01" | 840 Bearing Bronze | 0000000 | 000000 |
| 1/4" | -0.01" to 0.01" | 840 Bearing Bronze | 0000000 | 000000 |
| 3/8" | -0.01" to 0.01" | 840 Bearing Bronze | 0000000 | 000000 |
| 1/2" | -0.01" to 0.01" | 840 Bearing Bronze | 0000000 | 000000 |
| 5/8" | -0.01" to 0.01" | 840 Bearing Bronze | 0000000 | 000000 |
| 3/4" | -0.01" to 0.01" | 840 Bearing Bronze | 0000000 | 000000 |
| 1" | -0.01" to 0.01" | 840 Bearing Bronze | 0000000 | 000000 |
Self-Lubricating Wear Plates
Impact causes these porous bronze plates to release a thin layer of oil on the surface to minimize friction. Often found on conveyor systems and fabricating machinery, use these plates where friction between two parts or materials is wearing down equipment to extend equipment life. They can be used outdoors.
Magnetic Wear Strips
Easily attach, move, and replace these magnetic wear strips on metal surfaces to minimize friction—simply press them on and peel them off as needed. Often found on conveyor systems and chutes, use these strips where friction between two parts or materials is wearing down equipment to extend equipment life. All of these strips have an extra-hard rating to withstand high levels of impact. They are flexible enough to bend around a curve. They're also nonmarking.
Silicone-filled UHMW strips are more slippery than the standard UHMW strips. Objects with adhesives and labels on them will not stick to them to prevent backups on conveyors and chutes.
| Wd. | Lg., ft. | Thick. | Flexibility | Hardness Rating | Hardness | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Each | |
UHMW Plastic | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2" | 10 | 0.02" | Flexible | Extra Hard | Durometer 95A | 0° to 140° | No | Yes | Black | 0000000 | 000000 |
| 3/4" | 10 | 0.02" | Flexible | Extra Hard | Durometer 95A | 0° to 140° | No | Yes | Black | 0000000 | 00000 |
| 1" | 10 | 0.02" | Flexible | Extra Hard | Durometer 95A | 0° to 140° | No | Yes | Black | 0000000 | 00000 |
| 2" | 5 | 0.02" | Flexible | Extra Hard | Durometer 95A | 0° to 140° | No | Yes | Black | 0000000 | 00000 |
| 4" | 3 | 0.02" | Flexible | Extra Hard | Durometer 95A | 0° to 140° | No | Yes | Black | 0000000 | 00000 |
| 6" | 3 | 0.02" | Flexible | Extra Hard | Durometer 95A | 0° to 140° | No | Yes | Black | 0000000 | 00000 |
Silicone-Filled UHMW Plastic | |||||||||||
| 3/4" | 5 | 0.04" | Flexible | Extra Hard | Durometer 95A | 0° to 140° | No | Yes | Black | 0000000 | 00000 |
| 1" | 5 | 0.04" | Flexible | Extra Hard | Durometer 95A | 0° to 140° | No | Yes | Black | 0000000 | 00000 |
| 2" | 5 | 0.04" | Flexible | Extra Hard | Durometer 95A | 0° to 140° | No | Yes | Black | 0000000 | 00000 |
Food-Grade Wear Plates
Suitable for food contact, these plates are made of FDA listed UHMW plastic, which has a slippery surface to minimize friction. Often found on conveyor systems, use these plates where friction between two parts or materials is wearing down equipment to extend equipment life. All of these plates have a hard rating to withstand high levels of impact. They're also nonmarking.
| Thick. | Lg. | Wd. | Nonmarking | For Use Outdoors | Hardness Rating | Hardness | Temperature Range, °F | Specifications Met | Color | Each | |
UHMW Plastic | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/8" | 12" | 12" | Yes | No | Hard | Durometer 65D | -40° to 180° | Made of FDA Listed Materials | White | 0000000 | 00000 |
| 1/4" | 12" | 12" | Yes | No | Hard | Durometer 65D | -40° to 180° | Made of FDA Listed Materials | White | 0000000 | 00000 |
| 3/8" | 12" | 12" | Yes | No | Hard | Durometer 65D | -40° to 180° | Made of FDA Listed Materials | White | 0000000 | 00000 |