Keep a variety of brushes on hand to clean surfaces inside tubes, pipes, and holes where scratching is a concern. The bristles won’t leave behind debris that could cause rust on your workpiece.

Use brushes with nylon bristles around acids and alkalies.

For technical drawings and 3-D models, click on a part number.

The handle of these brushes makes it easy to clean tubes, pipes, and holes by hand. The bristles won't leave behind debris that could cause rust on your workpiece.

Brushes with nylon bristles are good for use around acids and alkalies. Use them to remove small burs and light-to-medium rust and stains.

These sets include brushes in the most common screw sizes. The handles make it easy to clean tubes, pipes, and holes by hand. The stainless steel bristles won't leave behind debris that could cause rust on your workpiece.

For technical drawings and 3-D models, click on a part number.

Change brush tips to clean different tube sizes.

Remove light to medium rust, stains, and small burs from tubes, pipes, and holes.

Brushes with stainless steel bristles won’t leave behind debris that could cause rust on your workpiece.

Clean the inside and outside of a tube with one brush.

Stainless steel bristles won't leave behind debris that could cause rust on your workpiece.

Tube size is an accepted industry designation, not an actual size.

Bristles inside the housing and a protruding brush clean the inside and outside of tubes in one step. They won't leave behind debris that could cause rust on your workpiece.

Tube size is an accepted industry designation, not an actual size.

Often used prior to installing rivets or other fasteners, these brushes have a pilot to maintain precise control while deburring and removing paint, coatings, and sharp edges from the surface surrounding a hole. The bristles won’t leave behind debris that could cause rust on your workpiece.

These air brushes dispense a set amount of paint as you spray, providing a uniform line thickness. Depress the trigger to increase air flow. To adjust paint flow, turn the needle adjustment screw at the back of the airbrush handle.

Kit with one spray head operates on the included can of compressed air. For larger jobs and prolonged spraying, use an adapter (sold separately) to connect to a compressor.

Control both air and paint flow while you spray, so you can vary the line thickness as you work. Depress the trigger to increase air flow and pull back on the trigger to increase paint flow. Connect the air brush to your compressor to operate. Use an air can adapter (sold separately) to operate with a compressed air can (sold separately).

Keep a variety of carbon brushes on hand to replace worn brushes on small DC motors.

Use the assorted tools in these sets to pull material out of tight spots. The corkscrew tips twist into material for a firm hold while the handle provides the necessary leverage for pulling. Also known as packing extractors and packing pullers, they are often used to remove packing material from pump and valve seals.

Flexible-shaft pullers bend to access material in tight spots.

Sets include six pieces of weatherstripping for an overhead door—two for the top and four for the sides to seal gaps.The seals are nylon for good wear resistance.

Sets include an assortment of handles and tips for pulling material out of tight spots. Replace tips when they become worn or to use a different style. Also known as packing extractors and packing pullers, they are often used to extract packing material from pump and valve seals.

Corkscrew tips twist into material for a firm hold.

Wood screw tips are used to drill into and remove hardened packing when corkscrew tips are unable to get a secure hold on your material.

Machine screw tips thread into tapped holes. They're good for removing stuck or seized metallic components that can't be gripped easily.

Brush tips have stiff bristles that clean debris out of cavities after material has been pulled out with a screw tip.

Use for cleaning small areas and devices, such as computer keyboards.