Style C have a straight back that lays flat against the wall when hung with the optional bracket.

Keep liquids in these pails from freezing without a separate heater. Plug them in and they're ready to go—a built-in thermostat turns them on when temperatures drop below 35° F and turns them off at a set temperature. Glance at the graduation marks etched on the inside wall to see how much material is in these pails. The power cord is wrapped in a metal sheath to protect it from rubbing and scraping.

Style B pails have a flat back, so they sit flush against a wall for added stability. A spout allows for spill-free pouring. On the bottom, they have a concealed compartment to store the cord when not in use. You can also mount them with a wall bracket (sold separately).

Mix and store noncorrosive flammable liquids, such as paints and lacquers. This pail has a flame arrester to protect against outside ignition and a grounding tab to reduce static electricity buildup.

These metal batch cans meet NSF/ANSI 2 standards for food-processing equipment.

A built-in faucet allows easy dispensing.

These batch cans come with loose fitting dust covers to protect contents from dust and debris.

A built-in faucet allows easy dispensing.

316 stainless steel is more corrosion resistant than 304 stainless steel.

Batch cans with drain have a drain centered on the bottom of the can.

Shipped flat so you can keep plenty of extras on hand, these cardboard containers have a self-locking base for fast assembly.

Store leftover hazardous liquids until they can be properly discarded. The spring-loaded, self-closing cap on these cans automatically vents to relieve excess vapor pressure, and a flame arrester protects against outside ignition.

Plastic cans are for aggressive chemicals and corrosives.

316 stainless steel cans are for liquids such as acetone, alcohol, ether, toluene, and xylene.

Galvanized steel cans are for petroleum-based liquids.

Easily fill these cans through the detachable wide-mouth funnel, then remove the threaded plug to empty. A flame arrester protects against outside ignition.

Also known as Type I safety cans, these have a single opening for both filling and pouring. Safety cans are a safer choice than fuel cans for storing flammable liquids. They have a spring-loaded, self-closing lid; pressure-relief cap; and a flame arrester.

Powder-coated steel cans are for petroleum-based liquids. Color-coding typically indicates usage: red for gasoline, yellow for diesel, blue for kerosene, and green for other liquids.

Stainless steel cans are corrosion resistant and often used with liquids such as acetone, ether, toluene, and xylene. Style E has a steel rim at the base for added support.

Polyethylene plastic cans won't rust, dent, or pit and are for chemicals and corrosives.

A self-closing faucet provides controlled, one-handed dispensing of flammable liquids. These safety cans also have a flame arrester and a self-closing pressure-relief cap.

Powder-coated steel cans are for petroleum-based liquids.

Polyethylene plastic cans are for chemicals and corrosives.

Stainless steel cans are corrosion resistant and often used with liquids such as acetone, ether, toluene, and xylene.

Also known as Type II safety cans, these have two openings—one for filling, one for pouring. Safety cans are a safer choice than fuel cans for storing flammable liquids. They have a spring-loaded, self-closing lid; pressure-relief cap; flame arrester; and a vacuum-release valve for controlled pouring.

Color-coding typically indicates usage: red for gasoline, yellow for diesel, blue for kerosene, and green for other liquids.

Style B have a steel roll bar that protects the spout, handle, and trigger during transport.

Style C have a rotating spout that flips down for pouring and up for storage.

Tip cans down for controlled dispensing, then swing them back to their upright position. These cans have a pressure-relief cap with built-in vacuum-release valve for controlled pouring.

Powder-coated steel can is for petroleum-based liquids.

Polyethylene plastic can is for chemicals and corrosives.

These pails have a twist-lock lid that opens and closes without tools and provides a more secure seal than a snap-lock lid. They are tested to comply with United Nations regulations for packaging and shipping hazardous material over land, sea, or air. These regulations aim to prevent hazardous spills caused by accidents or rough package handling.

Open pails for hazardous liquids by pulling back the lid handle and using it to twist open the lid. Open pails for hazardous solids by squeezing the release and turning the lid.

Neoprene seals provide an extra-tight closure in the lid.

Bail handles are flexible and comfortable to hold. You only need one hand to grab them.

Pails with a drip-free pouring lip have a solid rim for a clean, controlled pour.

Pails with an easy-access spout let you pour without opening the lid.

Pails with a security ring help discourage tampering. When the pail is opened, the ring on the lid separates.

Note: It is the responsibility of the shipper to follow regulatory guidelines for properly packaging and labeling all hazardous materials and ensure the appropriate method for shipping.

Add a tight-fitting, snap-lock lid to safely ship hazardous materials in these sturdy pails.

Lids (sold separately) have a Buna-N rubber seal for extra-tight closure.

Note: For one-time shipping only.

Prevent the absorption and permeation of chemicals with these fluorinated pails. Add a tight-fitting, snap-lock lid to safely ship hazardous materials.

These pails are tested to comply with United Nations regulations for packaging and shipping hazardous material over land, sea, or air. These regulations aim to prevent hazardous spills caused by accidents or rough package handling.

Lids (sold separately) have a Buna-N rubber seal for extra-tight closure.

Note: For one-time shipping only. It is the responsibility of the shipper to follow regulatory guidelines for properly packaging and labeling all hazardous materials, and ensure the appropriate method for shipping.

Add a lid to safely ship hazardous materials with these pails. The pail interior is lined with epoxy to prevent rust.

Lids (sold separately) have a latex seal for an extra-tight closure.

Use a closer (sold separately) to crimp the lid closed.

Note: These pails meet UN specifications for shipping only if used with the matching lid.

These pails come matched with UN-specified lids to safely ship hazardous materials. The lid has a rubber seal for an extra-tight closure. These pails are tested to comply with United Nations regulations for packaging and shipping hazardous material over land, sea, or air. These regulations aim to prevent hazardous spills caused by accidents or rough package handling.

Pails with an epoxy liner are the most chemical resistant.

Use a closer (sold separately) to crimp the lid closed.

Note: It is the responsibility of the shipper to follow regulatory guidelines for properly packaging and labeling all hazardous materials, and ensure the appropriate method for shipping.

Prevent the absorption of harsh solvents, cleaning agents, and adhesives to safely ship hazardous liquids. These jugs have a security ring on the lid that separates when the jugs are opened. They’re also known as closed-head pails. All of these jugs are tested to comply with United Nations regulations for packaging and shipping hazardous material over land, sea, or air. These regulations aim to prevent hazardous spills caused by accidents or rough package handling.

Jugs with a pouring vent let air escape while you're filling up.

Note: It is the responsibility of the shipper to follow regulatory guidelines for properly packaging and labeling all hazardous materials, and ensure the appropriate method for shipping.

Also known as closed-head pails, these jugs have a small top opening. Made of HDPE, they resist chemicals and prevent the absorption of harsh solvents, cleaning agents, and adhesives to safely ship hazardous liquids. These jugs are tested to comply with United Nations regulations for packaging and shipping hazardous material over land, sea, or air. These regulations aim to prevent hazardous spills caused by accidents or rough package handling.

Note: It is the responsibility of the shipper to follow regulatory guidelines for properly packaging and labeling all hazardous materials and ensure the appropriate method for shipping.

Also known as closed-head pails, these have a small top opening. They are tested to comply with United Nations regulations for packaging and shipping hazardous material over land, sea, or air. These regulations aim to prevent hazardous spills caused by accidents or rough package handling.

Steel jugs have an epoxy lining that resists rusting from water and corroding from chemicals.

Note: It is the responsibility of the shipper to follow regulatory guidelines for properly packaging and labeling all hazardous materials and ensure the appropriate method for shipping.

The jug inside these containers collapses as it dispenses for uninterrupted flow. The jug is protected by a cardboard box with an opening to access the jug’s spout. Use them together to ship hazardous liquids. The jug is tested to comply with United Nations regulations for packaging and shipping hazardous material over land, sea, or air. These regulations aim to prevent hazardous spills caused by accidents or rough package handling.

Note: It is the responsibility of the shipper to follow regulatory guidelines for properly packaging and labeling all hazardous materials, and ensure the appropriate method for shipping.