Use one wheel for buffing and the other wheel for occasional tool cleaning, sharpening, and touch-up work.

Use with lapping sticks and smoothing and polishing stones. Also known as profilers.

Before you buff, use these bonnets for easy application of waxes and polishes.

Loose layers of cloth conform to curves and contours.

Long, soft cotton strings conform to irregular surfaces and hold on to burring compounds longer than other wheels.

Holes in the hub allow air to flow through so the wheel stays cool and compound lasts longer. Also known as airway buffs.

Softer than flat-surface wheels, these conform to curves and contours.

The layers of sisal are sewn together for maximum rigidity and resistance to fraying.

The layers of flannel are sewn together, making these wheels more rigid than those for curved surfaces. Also known as Canton flannel buffs.

A uniform density helps distribute abrasive grains evenly throughout these felt wheels for a more consistent surface polish.

These ventilated flanges let you use wheels with a center hub on bench grinders and buffers.

Washable and reusable, these pads are good for buffing and polishing painted and clear-coat finishes.

Shaped for use on inside cylinders or on irregular surfaces.

A special fastener on the back of these flexible discs allows you to easily swap one disc for another. Use with a backup pad on grinders for bits and burs.

Polish small areas and hard-to-reach spots. Use in a drill or grinder for bits and burs.

The premium abrasive stays sharp longer.

An additive in the abrasive resists heat.

The abrasive‐embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.

A coating prevents dust and debris from building up on the abrasive surface.

With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap sanding wheels.

These assortments include various sizes and grits of flap sanding wheels. The threaded stud allows faster wheel changes but requires the use of an adapter in your tool.

The threaded stud allows faster wheel changes but requires the use of an adapter in your tool.

A coating prevents dust and debris from building up on the abrasive surface.

With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap wheels.

Assortments include a selection of flap wheels to polish, clean, and deburr deep inside tubes and cylinders.

Polish, clean, and debur deep inside tubes and cylinders.

Use these arbors to mount buffing wheels, grinding wheels and other abrasive discs to the tapered shaft on bench-top motors, grinders, and buffers.

Attach cutoff wheels, grinding wheels, and other abrasive wheels to hand-held drills and die grinders.

Use one of these spindles to mount buffing wheels to the tapered shaft on your grinder or buffer.

The shank on these spindles installs directly into grinder collets and drill chucks.

Long-lasting lubricated ball bearings make these grinders good for continuous use.

Pedestal grinders let you mount your grinder to work at a comfortable height.

Often used to polish optics such as mirrors and lenses.

Diamond cuts more quickly, lasts longer, and leaves a finer finish than other lapping grains.

This fast-lapping paste abrades quickly to produce a level, scratch-free surface.

Produce a level, scratch-free surface.

An additive makes this paste stick to your workpiece, so it's good for lapping curves and contours. It thins during use for even application and easy cleanup.

Diamond cuts more quickly, lasts longer, and leaves a finer finish than other lapping compounds.

Choose between a set of six water-soluble pastes or a set of six oil-soluble pastes.

The grains break down during use so they function first as an abrasive and then as a polish.

The thick bowl can handle steel media and heavy loads.

This nonabrasive media leaves a very shiny surface.

Produce a shiny surface on most metals.

Remove tarnish, oxidation, and light scratches from parts with fine detail or engraving.

Good for light material removal.

The two halves of this attachment have spikes to sandwich the pad and keep it from slipping off center.

Polish hard floors to a high-gloss finish with this burnisher that operates at 1,500 rpm.

This cleaner gets into tight spots, such as corners and behind toilets. It can also be used to clean baseboards and stairs.

Clean, polish, and protect aluminum, brass, copper, chrome, and stainless steel with this polish. It removes oxidation, tarnish, and surface rust without scratching or dulling brushed finishes.

Often used on machines, equipment, and vehicles, this three-part system makes faded painted metal surfaces look like new.

Free of abrasives and corrosives commonly found in other metal polish, this polish won’t damage or degrade aluminum surfaces.

Designed for use in Fed. Spec. Class 100 and ISO Class 5 clean rooms, these cleaners won't leave a residue that could attract contaminants. They come sterilized and double bagged.

Clean and condition wood surfaces, leaving a wax-free shine.

These restorers remove weld scale, discoloration, black oxides, and other impurities from stainless steel (also known as pickling) while restoring the corrosion-resistant chromium layer.

Less harsh than acid-based brighteners, these cleaners won’t damage or degrade aluminum surfaces.

Clean and restore shine to stainless steel surfaces. These cleaners leave a finish that resists dirt, oil, and water spots.

Ensure accurate calibration results with these solutions that come with an analysis certificate traceable to NIST that states they’ve passed a test for concentration.

Remove deposits and contaminants from pH sensors.

This synthetic felt is an economical alternative to wool felt.