Add panels to T-slotted framing to create machine guards, strip doors, and welding curtains.

Connect T‐slotted rails and reinforce joints for structural stability.

Use hinges to add doors, lids, and machine guards to T-slotted framing.

Mount these bull's eye levels to workstation and table frames made of T-slotted framing for easy leveling in all directions on the horizontal plane.

Add a convenient grip to steer carts or open and close doors, windows, and drawers made of T-slotted framing.

Slide drawers, panels, and doors with these tracks and rollers.

Align and drill accurate holes in T-slotted rails with these reusable templates.

Route wires, cables, and tubing along T-slotted rails.

Bumpers cushion doors and other moving parts to prevent damage and reduce noise.

Illuminate workstations, enclosures, and machines.

Distribute compressed air, hydraulic fluid, or water from a single supply to multiple locations.

Add electrical outlets to workstations with these outlet strips that mount on T-slotted rails.

Attach and position phones, tablets, monitors, and other displays on T-slotted rails.

In addition to being lightweight and strong, this plastic framing is nonconductive with good resistance to chemicals and salt water.

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

Brackets mount on the outside of strut channel to allow trolley movement.

A tab on the end of these shelf brackets fits inside the strut channel for extra stability.

In addition to serrated grooves for gripping the lip of the channel, these nuts have wings for easy positioning.

Position two strut channels at a 30° to 60° angle, then tighten the bolt to secure.

Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.

Use with hex nuts to connect threaded rod.

For compatibility with quick-connect clamps to secure pipe and conduit without screws and tools, this strut channel has narrow slotted holes.

This welded, one-piece strut channel combines two strut channels back-to-back.

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.

Keep a rod securely centered against the strut channel.

These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.

Slip these hangers onto the lip of top-opening strut channel to attach chain, wire rope, pipe, and threaded rod.

There's no need for additional fasteners with these nuts—they combine a strut channel nut with a spring and a threaded stud.

With welded ends, these short lengths of strut channel provide a finished look when mounting clamps and accessories to machines and surfaces.

Securely fasten strut channel to the floor.

Support the corners of strut channel structures.

Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.

Mount a length of strut channel between the ends of a beam to run cable and conduit along the beam without drilling.

Add hardware to strut channel without having to hold the washer in place or reach inside the channel.

Provide smooth motion between two pieces of strut channel.

Cover rough ends of strut channel.

Create continuous runs of channel without corners.

Create posts of varying lengths.

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.