How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Compression Fittings for Stainless Steel Tubing
A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included. Fittings are also known as flareless fittings or bite fittings. Use them in low- to medium-pressure applications.
316 stainless steel fittings have excellent corrosion resistance.
ISO and DIN fittings meet international dimensional standards.
For technical drawings and 3-D models, click on a part number.
- For Use With:
316 Stainless Steel with 17-4 PH Stainless Steel Sleeve: Air, Water, Hydraulic Fluid
316 Stainless Steel: Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water - Temperature Range:
316 Stainless Steel with 17-4 PH Stainless Steel Sleeve: -420° to 1200° F
316 Stainless Steel: -75° to 750° F - Tubing:
316 Stainless Steel with 17-4 PH Stainless Steel Sleeve: Use with welded or seamless 304 or 316 stainless steel that meets ASTM A269
316 Stainless Steel: Use with seamless 304 or 316/316L/316Ti stainless steel that meets DIN EN 10216-5 or DIN EN 10305-1 - Specifications Met:
316 Stainless Steel with 17-4 PH Stainless Steel Sleeve: SAE J514
316 Stainless Steel: ISO 8434, DIN 2353
Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through your wall or panel to create an inlet or outlet.
For Tube | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| OD | Wall Thick. | Material | Sleeve Material | Max. Pressure | Temp. Range, °F | For Hole Dia. | For Max. Wall Thick. | Each | |
| 6mm | 1mm | 316 Stainless Steel | 316 Stainless Steel | 7,200 psi @ 72° F | -75° to 750° | 14mm | 20mm | 0000000 | 000000 |
| 8mm | 1-1.5mm | 316 Stainless Steel | 316 Stainless Steel | 7,200 psi @ 72° F | -75° to 750° | 16mm | 19mm | 0000000 | 00000 |
| 10mm | 1-2mm | 316 Stainless Steel | 316 Stainless Steel | 7,200 psi @ 72° F | -75° to 750° | 18mm | 18mm | 0000000 | 00000 |
- For Use With: See table
- Temperature Range: See table
- Tubing: See table
- Specifications Met: See table
For Tube | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | Wall Thick. | Nut Material | Max. Pressure | For Use With | Temp. Range, °F | For Tube Material | For Tube Specifications Met | For Tube Fabrication | Specifications Met | Each | |
| 6mm | 1mm | 316 Stainless Steel | 7,200 psi @ 72° F | Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water | -75° to 750° | 304 Stainless Steel, 316/316L/316Ti Stainless Steel | DIN EN 10216-5, DIN EN 10305-1 | Seamless | DIN 2353, ISO 8434-1 | 0000000 | 00000 |
| 8mm | 1-1.5mm | 316 Stainless Steel | 7,200 psi @ 72° F | Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water | -75° to 750° | 304 Stainless Steel, 316/316L/316Ti Stainless Steel | DIN EN 10216-5, DIN EN 10305-1 | Seamless | DIN 2353, ISO 8434-1 | 0000000 | 0000 |
| 10mm | 1-2mm | 316 Stainless Steel | 7,200 psi @ 72° F | Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water | -75° to 750° | 304 Stainless Steel, 316/316L/316Ti Stainless Steel | DIN EN 10216-5, DIN EN 10305-1 | Seamless | DIN 2353, ISO 8434-1 | 0000000 | 0000 |
Precision Compression Fittings for Stainless Steel Tubing
- For Use With: Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water
- Temperature Range: -420° to 1200° F
- Tubing: Use with welded or seamless 304 or 316 stainless steel that meets ASTM A213, ASTM A249, or ASTM A269
- Compatible With: Parker CPI
Made to tighter tolerances than other compression fittings, these are designed for high-precision applications. Also known as instrumentation fittings and flareless fittings. They come with a nut and a single sleeve (ferrule). The sleeve bites into tubing as you tighten the nut to create a strong seal. Fittings are 316 stainless steel for excellent corrosion resistance. A molybdenum disulfide coating on the nut acts as a lubricant for easy installation.
For technical drawings and 3-D models, click on a part number.
Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through your wall or panel to create an inlet or outlet.
For Tube | |||||||
|---|---|---|---|---|---|---|---|
| OD | Wall Thick. | Material | Max. Pressure | For Hole Dia. | For Max. Wall Thick. | Each | |
| 1/8" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | 5/16" | 1/2" | 00000000 | 000000 |
| 3/16" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | 3/8" | 1/2" | 00000000 | 00000 |
| 1/4" | 0.035" | 316 Stainless Steel | 4,000 psi @ 72° F | 7/16" | 17/32" | 00000000 | 00000 |
| 5/16" | 0.035" | 316 Stainless Steel | 3,200 psi @ 72° F | 1/2" | 9/16" | 00000000 | 00000 |
| 3/8" | 0.035" | 316 Stainless Steel | 2,600 psi @ 72° F | 9/16" | 9/16" | 00000000 | 00000 |
| 1/2" | 0.035" | 316 Stainless Steel | 2,100 psi @ 72° F | 3/4" | 19/32" | 0000000 | 00000 |
| 5/8" | 0.049" | 316 Stainless Steel | 2,100 psi @ 72° F | 7/8" | 19/32" | 0000000 | 00000 |
| 3/4" | 0.049" | 316 Stainless Steel | 2,100 psi @ 72° F | 1" | 25/32" | 0000000 | 000000 |
For Tube | ||||
|---|---|---|---|---|
| OD | Wall Thick. | Nut Material | Max. Pressure | |
| 3/16" | 0.035" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 |
| 1/4" | 0.035" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 4,000 psi @ 72° F | 00000000 |
| 5/16" | 0.035" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 3,200 psi @ 72° F | 00000000 |
| 3/8" | 0.035" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 2,600 psi @ 72° F | 00000000 |
| 1/2" | 0.035" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 |
| 5/8" | 0.049" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 |
| 3/4" | 0.049" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 |
For Tube | ||||
|---|---|---|---|---|
| OD | Wall Thick. | Sleeve Material | Max. Pressure | |
| 1/8" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 |
| 3/16" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 |
| 1/4" | 0.035" | 316 Stainless Steel | 4,000 psi @ 72° F | 00000000 |
| 5/16" | 0.035" | 316 Stainless Steel | 3,200 psi @ 72° F | 00000000 |
| 3/8" | 0.035" | 316 Stainless Steel | 2,600 psi @ 72° F | 00000000 |
| 1/2" | 0.035" | 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 |
| 5/8" | 0.049" | 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 |
| 3/4" | 0.049" | 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 |
Precision Compression Fittings for Copper Tubing
- For Use With: Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water
- Temperature Range: -40° to 350° F
- Tubing: Use with seamless copper that meets ASTM B68, ASTM B75, or ASTM B88
- Compatible With: Parker CPI
Made to tighter tolerances than other compression fittings, these are designed for high-precision applications. They are also known as instrumentation fittings and flareless fittings. They come with a nut and a single sleeve (ferrule). The sleeve bites into tubing as you tighten the nut to create a strong seal. The nut has a molybdenum disulfide coating that acts as a lubricant for easy installation. Fittings are brass for good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through your wall or panel to create an inlet or outlet.
For Tube | |||||||
|---|---|---|---|---|---|---|---|
| OD | Wall Thick. | Material | Max. Pressure | For Hole Dia. | For Max. Wall Thick. | Each | |
| 1/8" | 0.035" | Brass | 2,700 psi @ 72° F | 5/16" | 1/2" | 00000000 | 000000 |
| 1/4" | 0.035" | Brass | 1,200 psi @ 72° F | 7/16" | 17/32" | 00000000 | 00000 |
| 5/16" | 0.035" | Brass | 1,200 psi @ 72° F | 1/2" | 7/16" | 00000000 | 00000 |
| 3/8" | 0.035" | Brass | 1,000 psi @ 72° F | 9/16" | 9/16" | 00000000 | 00000 |
| 1/2" | 0.049" | Brass | 1,100 psi @ 72° F | 3/4" | 1/2" | 00000000 | 00000 |
| 5/8" | 0.065" | Brass | 1,300 psi @ 72° F | 7/8" | 19/32" | 00000000 | 00000 |
For Tube | |||||
|---|---|---|---|---|---|
| OD | Wall Thick. | Nut Material | Max. Pressure | Each | |
| 1/8" | 0.035" | Brass | 2,700 psi @ 72° F | 00000000 | 00000 |
| 1/4" | 0.035" | Brass | 1,200 psi @ 72° F | 00000000 | 0000 |
| 5/16" | 0.035" | Brass | 1,200 psi @ 72° F | 00000000 | 0000 |
| 3/8" | 0.035" | Brass | 1,000 psi @ 72° F | 00000000 | 0000 |
| 1/2" | 0.049" | Brass | 1,200 psi @ 72° F | 00000000 | 0000 |
| 5/8" | 0.065" | Brass | 1,300 psi @ 72° F | 00000000 | 0000 |
For Tube | |||||
|---|---|---|---|---|---|
| OD | Wall Thick. | Sleeve Material | Max. Pressure | Each | |
| 1/8" | 0.035" | Brass | 2,700 psi @ 72° F | 00000000 | 00000 |
| 1/4" | 0.035" | Brass | 1,200 psi @ 72° F | 00000000 | 0000 |
| 5/16" | 0.035" | Brass | 1,200 psi @ 72° F | 00000000 | 0000 |
| 3/8" | 0.035" | Brass | 1,000 psi @ 72° F | 00000000 | 0000 |
| 1/2" | 0.049" | Brass | 1,200 psi @ 72° F | 00000000 | 0000 |
| 5/8" | 0.065" | Brass | 1,300 psi @ 72° F | 00000000 | 0000 |