Color Color | Show |
|---|
|
Color Color | Hide |
|---|
System of Measurement System of Measurement |
|---|
|
Length Length |
|---|
|
|
|
Hardness Rating Hardness Rating |
|---|
|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Shape Shape |
|---|
 |  |
| Round | Sheet and Bar |
Hardness Hardness |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Backing Type Backing Type |
|---|
 | Plain |
Durometer Durometer |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Durometer Hardness Scales
More
About Foam
More
About Rubber
More
Adhesive-Back Bumpers
Press these bumpers into place with the adhesive backing. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. They're comparable to Bumpon bumpers.
Bumpers with a medium and medium-soft rating offer a balance of cushioning and impact resistance. The softer the bumper, the more it cushions. Cork bumpers protect surfaces from scratches and scrapes. They are nonmarking and can be used outdoors.
For technical drawings and 3-D models, click on a part number.
| OD | Ht. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Pkg. Qty. | Pkg. | |
Cork | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1/2" | 1/16" | -20° to 200° | Yes | Medium Soft | Durometer 75 OO | Yes | Beige | 100 | 0000000 | 000000 |
| 3/4" | 1/16" | -20° to 200° | Yes | Medium Soft | Durometer 75 OO | Yes | Beige | 100 | 0000000 | 00000 |
| 1" | 1/16" | -20° to 200° | Yes | Medium Soft | Durometer 75 OO | Yes | Beige | 100 | 0000000 | 00000 |
Lockset Bumpers
Protect door knobs and other hardware from damage caused by carts, dollies, and other equipment. Mount these bumpers on doors next to, above, below, or over the item you wish to protect. Install them with screws.
Plastic bumpers are chemical resistant. They won't dry out and become brittle when exposed to UV rays.
For technical drawings and 3-D models, click on a part number.
| Lg. | Ht. | Projection | Material | Nonmarking | Mounting Fasteners Included | Color | Each | ||
Unthreaded Hole | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1 | 8 1/2" | 3" | 3 1/2" | Plastic | No | Yes | Beige | 0000000 | 000000 |
Plastic Corner Guards
Commonly used in offices, hospitals, and schools, these guards protect corners on walls and other surfaces from impact. All have a hard rating to withstand high levels of impact.
Polycarbonate and PETG guards are nonmarking.
Adhesive-back guards allow for easy installation. Screw-in guards mount with fasteners. Guards that do not have mounting holes require drilling holes.
Style 1-3 are available in different colors to match your facility. Use a color selector pack (sold separately) if you’re unsure of what color to choose.
For technical drawings and 3-D models, click on a part number.
Color | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Nonmarking | For Use Outdoors | Hardness Rating | Temp. Range, °F | Mounting Fasteners Included | Color | 4 ft. | 8 ft. | |
Style 1—90° Angle | ||||||||||
Polycarbonate Plastic—Adhesive Back | ||||||||||
| 3/4" | 3/64" | Yes | No | Hard | Not Rated | __ | Beige | 0000000 | ||
| 1 1/8" | 1/16" | Yes | No | Hard | Not Rated | __ | Beige | 0000000 | ||
| 2 1/2" | 3/32" | Yes | No | Hard | Not Rated | __ | Beige | 0000000 | ||
Polycarbonate Plastic—Screw In | ||||||||||
| 3/4" | 3/64" | Yes | No | Hard | Not Rated | Yes | Beige | 0000000 | ||
| 1 1/8" | 1/16" | Yes | No | Hard | Not Rated | Yes | Beige | 0000000 | ||
| 2 1/2" | 3/32" | Yes | No | Hard | Not Rated | Yes | Beige | 0000000 | ||
Vinyl Plastic—Adhesive Back | ||||||||||
| 1 1/8" | 5/64" | No | No | Hard | 60° to 120° | __ | Beige | 0000000 | ||
| 2 1/2" | 5/64" | No | No | Hard | 60° to 120° | __ | Beige | 0000000 | ||
Style 2—90° Angle | ||||||||||
Polycarbonate Plastic—Adhesive Back | ||||||||||
| 2 1/2" | 3/32" | Yes | No | Hard | Not Rated | __ | Beige | 0000000 | ||
Polycarbonate Plastic—Screw In | ||||||||||
| 2 1/2" | 3/32" | Yes | No | Hard | Not Rated | Yes | Beige | 0000000 | ||
Style 3—135° Angle | ||||||||||
Polycarbonate Plastic—Adhesive Back | ||||||||||
| 2 1/2" | 3/32" | Yes | No | Hard | Not Rated | __ | Beige | 0000000 | ||
Polycarbonate Plastic—Screw In | ||||||||||
| 2 1/2" | 3/32" | Yes | No | Hard | Not Rated | Yes | Beige | 0000000 | ||
| Polycarbonate Plastic Color Selector Packs | 000000 | Each | 00000 |
| Vinyl Plastic Color Selector Packs | 0000000 | Each | 000 |
| Beige Vinyl Plastic End Caps 1 1/8" | 00000000 | Each | 0000 |
| Beige Vinyl Plastic End Caps 2 1/2" | 00000000 | Each | 0000 |
| Black Vinyl Plastic End Caps 1 1/8" | 00000000 | Each | 0000 |
| Black Vinyl Plastic End Caps 2 1/2" | 00000000 | Each | 0000 |
Corner and Surface Guard Systems
Combine corner guards, surface guards, and end caps to create a system that protects walls and equipment from impact and wear. Often used in offices, hospitals, and schools, these systems protect against damage from small carts and chairs. Made of vinyl, all of the system components have a hard rating to withstand high levels of impact. They're also nonmarking.
Mount corner guards and end caps with fasteners. To install surface guards, slide them onto the included aluminum base, which needs to be drilled and secured with fasteners.
Style 5 includes two end caps.
For technical drawings and 3-D models, click on a part number.
| Wd. | Thick. | Temp. Range, °F | For Use Outdoors | Fasteners Included | Nonmarking | Color | Lg. | Each | |
Surface Guard | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1 1/8" | 1 1/16" | 40° to 110° | No | No | Yes | Beige | 6ft. | 00000000 | 000000 |
| 1 1/8" | 1 1/16" | 40° to 110° | No | No | Yes | Beige | 12ft. | 00000000 | 00000 |
| 2" | 1 3/4" | 40° to 110° | No | No | Yes | Beige | 6ft. | 00000000 | 00000 |
| 2" | 1 3/4" | 40° to 110° | No | No | Yes | Beige | 12ft. | 00000000 | 000000 |
Corner Guard | |||||||||
| 1 1/8" | 1 1/16" | 40° to 110° | No | No | Yes | Beige | 1 1/2" | 00000000 | 0000 |
| 1 1/8" | 1 1/16" | 40° to 110° | No | No | Yes | Beige | 1 1/2" | 00000000 | 0000 |
| 2" | 1 3/4" | 40° to 110° | No | No | Yes | Beige | 2 3/8" | 00000000 | 0000 |
| 2" | 1 3/4" | 40° to 110° | No | No | Yes | Beige | 2 3/8" | 00000000 | 0000 |
End Cap | |||||||||
| 1 1/8" | 1 1/16" | 40° to 110° | No | No | Yes | Beige | 1 1/2" | 00000000 | 0000 |
| 1 1/8" | 1 1/16" | 40° to 110° | No | No | Yes | Beige | 1 1/2" | 00000000 | 0000 |
| 2" | 1 3/4" | 40° to 110° | No | No | Yes | Beige | 2 1/2" | 00000000 | 00000 |
| 2" | 1 3/4" | 40° to 110° | No | No | Yes | Beige | 2 1/2" | 00000000 | 00000 |
| Wd. | Thick. | Temp. Range, °F | For Use Outdoors | Nonmarking | Color | Mounting Fasteners Included | Lg. | Each | |
Surface Guard | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 2 15/16" | 1" | 40° to 110° | No | Yes | Beige | No | 6ft. | 00000000 | 000000 |
| 2 15/16" | 1" | 40° to 110° | No | Yes | Beige | No | 12ft. | 00000000 | 000000 |
| 6" | 1" | 40° to 110° | No | Yes | Beige | No | 6ft. | 00000000 | 00000 |
| 6" | 1" | 40° to 110° | No | Yes | Beige | No | 12ft. | 00000000 | 000000 |
Corner Guard | |||||||||
| 2 15/16" | 1" | 40° to 110° | No | Yes | Beige | No | 1 3/8" | 00000000 | 00000 |
| 2 15/16" | 1" | 40° to 110° | No | Yes | Beige | No | 1 3/8" | 00000000 | 00000 |
| 6" | 1" | 40° to 110° | No | Yes | Beige | No | 1 1/2" | 00000000 | 0000 |
| 6" | 1" | 40° to 110° | No | Yes | Beige | No | 1 1/2" | 00000000 | 0000 |
End Cap | |||||||||
| 2 15/16" | 1" | 40° to 110° | No | Yes | Beige | No | 1 1/2" | 00000000 | 0000 |
| 2 15/16" | 1" | 40° to 110° | No | Yes | Beige | No | 1 1/2" | 00000000 | 0000 |
| 6" | 1" | 40° to 110° | No | Yes | Beige | No | 1 1/2" | 00000000 | 0000 |
| 6" | 1" | 40° to 110° | No | Yes | Beige | No | 1 1/2" | 00000000 | 0000 |
Slippery High-Temperature Plastic Trim
This trim withstands temperatures up to 500° F, which is generally twice as high as our other slippery trim. Made of PTFE, it has a slippery surface to minimize friction between parts and is often used on conveyor rails, chutes, and guides. It's also chemical resistant. This trim has a hard or medium-hard rating to withstand high levels of impact. The harder the trim, the more impact it withstands. All of the trim is nonmarking.
Very flexible trim can be bent around tight corners.
Adhesive-back trim allows for easy installation. It is not for use outdoors.
For technical drawings and 3-D models, click on a part number.
Outside | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. (C) | Ht. (D) | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Length, ft. | Each | ||
PTFE Plastic | |||||||||||
| 7 | 1/2" | 0.005" | Very Flexible | Medium Hard | 40° to 500° | No | Yes | Beige | 15 | 0000000 | 000000 |
| 7 | 1" | 0.005" | Very Flexible | Medium Hard | 40° to 500° | No | Yes | Beige | 15 | 0000000 | 00000 |
| 7 | 1 1/2" | 0.005" | Very Flexible | Medium Hard | 40° to 500° | No | Yes | Beige | 15 | 0000000 | 00000 |
| 7 | 2" | 0.005" | Very Flexible | Medium Hard | 40° to 500° | No | Yes | Beige | 15 | 0000000 | 00000 |
Slippery Plastic Trim
With a slippery surface, this trim minimizes friction between parts and is often used on conveyor rails, chutes, and guides. Made of plastic, it's also chemical resistant. All of this trim has a hard rating to withstand high levels of impact. It's also nonmarking.
Very flexible trim can be bent around tight corners.
Adhesive-back trim allows for easy installation. Made of UHMW and PEEK, it has good wear resistance.
For technical drawings and 3-D models, click on a part number.
Plastic Wall Bases
In addition to protecting the bottom of a wall from damage, these bases create a finished look where the wall meets the floor. They're commonly used in offices, hospitals, and schools. All of these bases have a hard rating to withstand high levels of impact. They are flexible so they can bend along a gradual curve. They're also nonmarking. These bases are available in different colors to match your facility. Use a color selector pack (sold separately) if you’re unsure of what color to choose.
Glue-on bases require contact adhesive to adhere to surfaces.
For technical drawings and 3-D models, click on a part number.
| Wd. | Lg. | Thick. | Nonmarking | For Use Outdoors | Flexibility | Hardness Rating | Hardness | Temperature Range, °F | Color | Each | |
Vinyl Plastic | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Inside Corner—Glue On | |||||||||||
| 4" | 4" | 1/8" | Yes | No | Flexible | Hard | Durometer 90A | 60° to 90° | Beige | 000000 | 00000 |
| 6" | 4" | 1/8" | Yes | No | Flexible | Hard | Durometer 90A | 60° to 90° | Beige | 000000 | 0000 |
Outside Corner—Glue On | |||||||||||
| 4" | 4" | 1/8" | Yes | No | Flexible | Hard | Durometer 90A | 60° to 90° | Beige | 000000 | 0000 |
| 6" | 4" | 1/8" | Yes | No | Flexible | Hard | Durometer 90A | 60° to 90° | Beige | 000000 | 0000 |
Straight—Glue On | |||||||||||
| 4" | 4ft. | 1/8" | Yes | No | Flexible | Hard | Durometer 90A | 60° to 90° | Beige | 000000 | 0000 |
| 4" | 120ft. | 1/8" | Yes | No | Flexible | Hard | Durometer 90A | 60° to 90° | Beige | 000000 | 000000 |
| 6" | 4ft. | 1/8" | Yes | No | Flexible | Hard | Durometer 90A | 60° to 90° | Beige | 000000 | 00000 |
| 6" | 100ft. | 1/8" | Yes | No | Flexible | Hard | Durometer 90A | 60° to 90° | Beige | 000000 | 000000 |
Super-Stretchable Abrasion-Resistant Natural Rubber Sheets and Strips
These natural rubber sheets and strips will stretch up to six times their length. Use them in dynamic applications, such as vibration isolators and shock mounts. Natural rubber is often called gum rubber and latex rubber.
For technical drawings and 3-D models, click on a part number.
- Color: Beige or white
- Temperature Range: Tan sheets: -20° to 140° F; White sheets: -40° to 158° F
- Tensile Strength: Tan sheets: 3,000 psi; White sheets: 2,800 psi
- For Use Outdoors: No
| Thick. | Thick. Tolerance | Durometer | Specifications Met | Each | |
12" × 12" | |||||
|---|---|---|---|---|---|
Beige | |||||
| 1/16" | -0.016" to +0.016" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 1/8" | -0.020" to +0.020" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 3/16" | -0.031" to +0.031" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 1/4" | -0.031" to +0.031" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 3/8" | -0.047" to +0.047" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 1/2" | -0.047" to +0.047" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 3/4" | -0.094" to +0.094" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 1" | -0.100" to +0.100" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 000000 |
12" × 24" | |||||
Beige | |||||
| 1/16" | -0.016" to +0.016" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 1/8" | -0.020" to +0.020" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 3/16" | -0.031" to +0.031" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 1/4" | -0.031" to +0.031" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 3/8" | -0.047" to +0.047" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 1/2" | -0.047" to +0.047" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 000000 |
| 3/4" | -0.094" to +0.094" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 000000 |
| 1" | -0.100" to +0.100" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 000000 |
24" × 24" | |||||
Beige | |||||
| 1/16" | -0.016" to +0.016" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 1/8" | -0.020" to +0.020" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 3/16" | -0.031" to +0.031" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 1/4" | -0.031" to +0.031" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 000000 |
| 3/8" | -0.047" to +0.047" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 000000 |
| 1/2" | -0.047" to +0.047" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 000000 |
| 3/4" | -0.094" to +0.094" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 000000 |
| 1" | -0.100" to +0.100" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 000000 |
- Color: Beige or white
- Temperature Range: Tan sheets: -20° to 140° F; White sheets: -40° to 158° F
- Tensile Strength: Tan sheets: 3,000 psi; White sheets: 2,800 psi
- For Use Outdoors: No
36" Wd. | ||||||
|---|---|---|---|---|---|---|
| Thick. | Thick. Tolerance | Durometer | Lengths, ft. | Specifications Met | Per Ft. | |
Beige | ||||||
| 1/16" | -0.016" to +0.016" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 000000 | |
| 1/8" | -0.020" to +0.020" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 | |
| 3/16" | -0.031" to +0.031" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 | |
| 1/4" | -0.031" to +0.031" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 | |
| 3/8" | -0.047" to +0.047" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 000000 | |
| 1/2" | -0.047" to +0.047" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 000000 | |
| 3/4" | -0.094" to +0.094" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 000000 | |
| 1" | -0.100" to +0.100" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 000000 | |
- Color: Beige or white
- Temperature Range: Tan strips: -20° to 140°; White strips: -40° to 158° F
- Tensile Strength: Tan strips: 3,000 psi; White strips: 2,800 psi
- For Use Outdoors: No
| Thick. | Thick. Tolerance | Durometer | Specifications Met | Each | |
2" × 36" | |||||
|---|---|---|---|---|---|
Beige | |||||
| 1/16" | -0.016" to +0.016" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 1/8" | -0.020" to +0.020" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 3/16" | -0.031" to +0.031" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 1/4" | -0.031" to +0.031" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 3/8" | -0.047" to +0.047" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 1/2" | -0.047" to +0.047" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 3/4" | -0.094" to +0.094" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 1" | -0.100" to +0.100" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
4" × 36" | |||||
Beige | |||||
| 1/16" | -0.016" to +0.016" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 1/8" | -0.020" to +0.020" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 3/16" | -0.031" to +0.031" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 1/4" | -0.031" to +0.031" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 3/8" | -0.047" to +0.047" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 1/2" | -0.047" to +0.047" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 3/4" | -0.094" to +0.094" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 000000 |
| 1" | -0.100" to +0.100" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 000000 |
6" × 36" | |||||
Beige | |||||
| 1/16" | -0.016" to +0.016" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 1/8" | -0.020" to +0.020" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 3/16" | -0.031" to +0.031" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 1/4" | -0.031" to +0.031" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 3/8" | -0.047" to +0.047" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 1/2" | -0.047" to +0.047" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 3/4" | -0.094" to +0.094" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 000000 |
| 1" | -0.100" to +0.100" | 40A (Medium Soft) | ASTM D2000 AA, FDA Compliant 21 CFR 177.2600 | 0000000 | 000000 |
Super-Cushioning Foam Mesh Sheets
- Color: Black, White, or Beige
- Temperature Range: -20° to 140° F
- Cell Type : Closed
- For Use Outdoors: No
- Pressure to Compress 25%: Not Rated
- Tensile Strength Rating: Not Rated
- Oil-Resistance Rating: Not Rated
There are hundreds of cushioning pillows in every foot of these pliable mesh sheets. They're often used as a protective liner in drawers and cabinets and anywhere a nonskid surface is required. This vinyl-coated polyester foam has closed-cell construction, which restricts water, air, and gases from being absorbed. Sheets are washable and moisture and bacteria resistant.