About Durometer Hardness Scales
More
About Vibration-Damping Mounts
More
About Leveling Mounts
More
Selecting U-Bolts Using Pipe, Conduit, or Tubing Trade Size
More
Threaded Bumpers
Mount these bumpers on a threaded stud. All are reinforced with a steel core or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. All of these bumpers can be used outdoors.
Bumpers with a medium and medium-soft rating offer a balance of cushioning and impact resistance. The softer the bumper, the more it cushions.
Bumpers with an extra-hard, hard, and medium-hard rating withstand high levels of impact. The harder the bumper, the more impact it withstands.
Buna-N bumpers resist abrasion, oil, and grease.
Neoprene bumpers have good abrasion resistance.
Polyurethane bumpers have better abrasion resistance than neoprene bumpers. They won't become brittle and crack when exposed to ozone.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size | Dp. | OD | Ht. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Each | |
Buna-N Rubber with Steel Core | |||||||||||
5/8"-11 | 5/8" | 1 3/4" | 1 5/8" | -60° to 175° | Yes | Medium Soft | Durometer 40A | Yes | White | 00000000 | 000000 |
Neoprene Rubber with Steel Core | |||||||||||
5/8"-11 | 5/8" | 1 3/4" | 1 5/8" | -40° to 200° | Yes | Hard | Durometer 75A | No | Black | 00000000 | 00000 |
5/8"-11 | 5/8" | 1 3/4" | 1 5/8" | -40° to 200° | Yes | Medium Soft | Durometer 40A | No | Black | 0000000 | 00000 |
Polyurethane Rubber with Steel Core | |||||||||||
5/8"-11 | 5/8" | 1 3/4" | 1 5/8" | -40° to 200° | Yes | Extra Hard | Durometer 95A | No | Black | 00000000 | 00000 |
5/8"-11 | 5/8" | 1 3/4" | 1 5/8" | -40° to 200° | Yes | Hard | Durometer 85A | No | Red | 0000000 | 00000 |
5/8"-11 | 5/8" | 1 3/4" | 1 5/8" | -40° to 200° | Yes | Medium | Durometer 50A | No | Red | 00000000 | 00000 |
5/8"-11 | 5/8" | 1 3/4" | 1 5/8" | -40° to 200° | Yes | Medium Hard | Durometer 60A | No | Black | 00000000 | 00000 |
5/8"-11 | 5/8" | 1 3/4" | 1 5/8" | -40° to 200° | Yes | Medium Soft | Durometer 40A | No | Red | 0000000 | 00000 |
General Purpose Bolt-Down Vibration-Damping Mounts with Threaded Hole
These mounts bolt to your mounting surface to keep your equipment stationary. Use them in compression load applications with rotating equipment such as fans, blowers, pumps, compressors, and generators.
Neoprene rubber has good resistance to oil and gasoline.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Capacity per Mount, lbs. | Deflection @ Capacity | O'all Ht. | Dia. | Base Lg. | Base Wd. | Hardness | Temperature Range, °F | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Each | ||
Black Neoprene Rubber with Steel Base | |||||||||||||||
6 | 5/8"-11 | 1,500 | 0.03" | 1.19" | 4" | 7" | 2.5" | Durometer 65A | 0° to 180° | No | 2 | 0.66" | 5.5" | 00000000 | 0000000 |
6 | 5/8"-11 | 3,000 | 0.03" | 1.19" | 4" | 7" | 4" | Durometer 60A | 0° to 180° | No | 2 | 0.66" | 5.5" | 00000000 | 000000 |
Adjustable Extreme-Force Bolt-Down
Vibration-Damping Mounts with Threaded Hole
Connect these mounts to your air supply for vibration and shock isolation in compression load applications. They handle the high impact of equipment such as punch presses, blowers, forging hammers, shakers, vibrators, and air compressors. Use the holes in the base to bolt down these mounts to keep your equipment stationary. Neoprene rubber has good resistance to oil and gasoline. You can add or release air for leveling (±1/4" adjustment).
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Capacity per Mount, lbs. | Deflection @ Capacity | O'all Ht. | Dia. | Ht. | Base Lg. | Base Wd. | Hardness | Max. Pressure, psi | Temperature Range, °F | Features | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Each | |
Neoprene Rubber with Aluminum Base and Steel Plate | |||||||||||||||||
5/8"-11 | 2,400 | 1.25" | 3.5" | 9.66" | 2.94" | 10" | 10" | Durometer 60A | 80 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.56" | 8.5" | 00000000 | 0000000 |
5/8"-11 | 4,800 | 1.5" | 3.5" | 13.31" | 2.94" | 13.5" | 13.5" | Durometer 60A | 80 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.56" | 12" | 00000000 | 000000 |
Seismic Bolt-Down Vibration-Damping Mounts with Threaded Hole
Limit damage during moderate earthquakes. These mounts have a seismic rating of 1g (acceleration of gravity) and dissipate vibration and noise in compression and shear load applications. Use the holes in the base to bolt down these mounts to keep your equipment stationary. Neoprene rubber has good resistance to oil and gasoline. Mounts come with a bolt and washer for height adjustment.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | Shear Capacity per Mount, lbs. | Deflection @ Shear Capacity | O'all Ht. | Dia. | Base Lg. | Base Wd. | Hardness | Temperature Range, °F | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. | Each | |
Neoprene Rubber with Steel Base and Cadmium-Plated Steel Bolt | ||||||||||||||||
5/8"-11 | 1 1/4" | 1,400 | 0.15" | 400 | 0.09" | 2.375" | 3.5" | 6.25" | 3.75" | Durometer 40A | -20° to 225° | No | 0.563" | 5", 2.5" | 0000000 | 000000 |
5/8"-11 | 1 1/4" | 2,100 | 0.15" | 600 | 0.09" | 2.375" | 3.5" | 6.25" | 3.75" | Durometer 50A | -20° to 225° | No | 0.563" | 5", 2.5" | 0000000 | 00000 |
5/8"-11 | 1 1/4" | 3,500 | 0.15" | 1,000 | 0.09" | 2.375" | 3.5" | 6.25" | 3.75" | Durometer 60A | -20° to 225° | No | 0.563" | 5", 2.5" | 0000000 | 00000 |
Chemical-Resistant Vibration-Damping Mounts
with Threaded Hole and Corrosion-Resistant Plate
Well-suited to moist environments, these mounts have a stainless steel plate for excellent corrosion resistance. Their polyurethane base resists solvents, gasoline, and oil. Mounts minimize vibration and noise from machinery to reduce maintenance costs, prolong equipment life, and protect floors. Use them in compression load applications.
For technical drawings and 3-D models, click on a part number.
Thread Size | Capacity per Mount, lbs. | Deflection @ Capacity | Overall Ht. | Dia. | Base Dia. | Hardness | Hardness Rating | Temperature Range, °F | Each | |
Blue Polyurethane Rubber with Stainless Steel Plate | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
5/8"-11 | 7,000 | 0.3" | 1.25" | 5" | 6" | Durometer 65A | Medium Hard | -50° to 170° | 0000000 | 0000000 |
Chemical-Resistant Vibration-Damping Mounts with Threaded Hole and Steel Plate
The polyurethane base on these mounts resists solvents, gasoline, and oil, while the metal plate sustains heavy loads. Mounts minimize vibration and noise from machinery to reduce maintenance costs, prolong equipment life, and protect floors. Use them in compression load applications.
For technical drawings and 3-D models, click on a part number.
Thread Size | Capacity per Mount, lbs. | Deflection @ Capacity | O'all Ht. | Dia. | Base Dia. | Hardness | Hardness Rating | Temperature Range, °F | Each | |
Blue Polyurethane Rubber with Zinc-Plated Steel Plate | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
5/8"-11 | 7,000 | 0.3" | 1.25" | 5" | 6" | Durometer 65A | Medium Hard | -50° to 170° | 0000000 | 0000000 |
Corrosion-Resistant Swivel Vibration-Damping
Leveling Mounts with Threaded Stud
All-stainless steel construction stands up to water and chemicals and won't rust or corrode. Use these mounts to minimize vibration and noise to prolong machine life and protect floors. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | Base Dia. | Overall Ht. | Temperature Range, °F | Each | |
304 Stainless Steel with Rubber Cushion | ||||||||
---|---|---|---|---|---|---|---|---|
5/8"-11 | 4" | 500 | 0.07" | 2 5/8" | 5" | 0° to 200° | 0000000 | 000000 |
5/8"-11 | 4" | 1,000 | 0.12" | 3 13/16" | 5 7/16" | 0° to 200° | 0000000 | 00000 |
5/8"-11 | 4" | 2,000 | 0.12" | 3 7/8" | 5 7/16" | 0° to 200° | 0000000 | 00000 |
5/8"-11 | 4" | 3,000 | 0.17" | 5 1/2" | 6" | 0° to 200° | 0000000 | 00000 |
5/8"-11 | 6" | 500 | 0.07" | 2 5/8" | 7" | 0° to 200° | 0000000 | 00000 |
5/8"-11 | 6" | 1,000 | 0.12" | 3 13/16" | 7 7/16" | 0° to 200° | 0000000 | 00000 |
5/8"-11 | 6" | 2,000 | 0.12" | 3 7/8" | 7 7/16" | 0° to 200° | 0000000 | 00000 |
5/8"-11 | 6" | 3,000 | 0.17" | 5 1/2" | 8" | -20° to 190° | 00000000 | 000000 |
5/8"-11 | 6" | 4,000 | 0.17" | 5 1/2" | 8" | 0° to 200° | 0000000 | 000000 |
5/8"-11 | 8" | 1,000 | 0.12" | 3 7/8" | 9 7/16" | -20° to 190° | 00000000 | 00000 |
5/8"-11 | 8" | 2,000 | 0.12" | 3 7/8" | 9 7/16" | -20° to 190° | 00000000 | 00000 |
5/8"-11 | 10" | 1,000 | 0.12" | 3 7/8" | 11 7/16" | -20° to 190° | 00000000 | 000000 |
5/8"-11 | 10" | 2,000 | 0.12" | 3 7/8" | 11 7/16" | -20° to 190° | 00000000 | 000000 |
Swivel Vibration-Damping Leveling Mounts with Threaded Stud
Use these mounts to minimize vibration and noise to prolong machine life and protect floors. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection. They're yellow zinc plated for corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | Base Dia. | O'all Ht. | Hex Nut Wd. | Temperature Range, °F | Each | |
Yellow Zinc-Plated Steel with Black Rubber Cushion | |||||||||
---|---|---|---|---|---|---|---|---|---|
5/8"-11 | 2" | 1,800 | 0.05" | 2 1/2" | 3 7/8" | 7/8" | -20° to 170° | 0000000 | 000000 |
Yellow Zinc-Plated Steel with Brown Rubber Cushion | |||||||||
5/8"-11 | 2" | 4,400 | 0.06" | 2 1/2" | 3 7/8" | 7/8" | -20° to 170° | 0000000 | 00000 |
Extreme-Force Swivel Vibration-Damping Leveling Mounts with Threaded Stud
Higher deflection ratings translate to greater vibration and shock isolation. These mounts have a rubber base that grips the floor for stability and is resistant to oil and grease. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | Swivel Range of Motion | Base Lg. | Base Wd. | Base Ht. | Overall Ht. | Hardness | Hardness Rating | Temp. Range, °F | Each | |
Rubber with Zinc-Plated Steel Stud | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
5/8"-11 | 2 1/2" | 350 | 0.13" | 7.5° | 3" | 3" | 5/8" | 3 1/4" | Durometer 50A | Medium | -20° to 180° | 00000000 | 000000 |
5/8"-11 | 2 1/2" | 700 | 0.13" | 7.5° | 3" | 3" | 5/8" | 3 1/4" | Durometer 70A | Hard | -20° to 180° | 00000000 | 00000 |
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | Swivel Range of Motion | Base Dia. | Base Ht. | Overall Ht. | Hardness | Hardness Rating | Temp. Range, °F | Each | |
Rubber with Zinc-Plated Steel Stud | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
5/8"-11 | 2 1/2" | 500 | 0.13" | 7.5° | 3" | 3/4" | 3 1/2" | Durometer 50A | Medium | -20° to 180° | 00000000 | 000000 |
5/8"-11 | 2 1/2" | 1,000 | 0.13" | 7.5° | 3" | 3/4" | 3 1/2" | Durometer 70A | Hard | -20° to 180° | 00000000 | 00000 |
Sanitary Swivel Vibration-Damping Leveling Mounts with Threaded Stud
Thread these mounts into machinery to level them on uneven floors in sanitary environments such as food-processing areas. They also create space to clean underneath machinery. All have a hygienic thread cover that prevents contaminants from settling in the grooves. To further block out contaminants as the mount moves, as well as prevent unsanitary metal-to-metal connections, there is a silicone seal at each end of the thread cover and at the point where the mount swivels. These seals have chemical additives, so you can find them with an X-ray machine if a piece falls into your line. This helps you comply with Hazard Analysis and Critical Control Point (HACCP) programs to keep contaminated food from leaving your facility. Seals are also FDA compliant for direct contact with food.
Made of 304 stainless steel, these mounts won’t corrode from frequent washdowns with harsh cleaners and sanitizers. Their smooth finish and rounded edges leave no crevices for bacteria to grow in, reducing the chance of foodborne illnesses. They also don’t have any horizontal ledges, so liquids and food will drain off completely. Certified by 3-A, EHEDG, and USDA, they meet sanitary design standards.
The rubber cushion on the bottom reduces vibration and noise from machinery, which protects floors and extends machine life. Their grip on the floor minimizes bacteria growth beneath them and prevents machines from shifting.
These mounts swivel to level machinery on slightly uneven floors; for severely uneven floors, use the threaded stud to raise each mount to a level height.
Some mounts have mounting holes to secure them to the floor, keeping machinery stationary. Mounts with one mounting hole are secure enough to prevent machines from moving while they’re running and being cleaned. Mounts with two mounting holes reduce vibration by anchoring machinery to the floor on both sides.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Mounting Ht. | Cap. per Mount, lbs. | Deflection @ Cap. | Swivel Range of Motion | Base Dia. | Overall Ht. | Temp. Range, °F | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. Lg. | Performance Properties | Specifications Met | Performance | Each | |
304 Stainless Steel with Rubber Cushion | ||||||||||||||||
5/8"-11 | 3 3/8" | 4 1/8"-5 1/2" | 2,000 | Not Rated | 10° | 2 9/16" | 7" | -30° to 230° | __ | __ | __ | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Accepted Equipment | Antislip, Vibration Damping | 000000 | 000000 |
5/8"-11 | 3 3/8" | 4 3/8"-5 11/16" | 3,300 | Not Rated | 10° | 3 3/16" | 7 1/4" | -30° to 230° | __ | __ | __ | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Accepted Equipment | Antislip, Vibration Damping | 000000 | 00000 |
5/8"-11 | 3 3/8" | 4 3/8"-5 11/16" | 4,900 | Not Rated | 10° | 4 1/8" | 7 1/4" | -30° to 230° | __ | __ | __ | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Accepted Equipment | Antislip, Vibration Damping | 0000000 | 00000 |
5/8"-11 | 4 1/2" | 5 5/16"-7 7/8" | 2,000 | Not Rated | 10° | 2 9/16" | 9 3/8" | -30° to 230° | __ | __ | __ | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Accepted Equipment | Antislip, Vibration Damping | 000000 | 00000 |
5/8"-11 | 4 1/2" | 5 1/2"-8 1/16" | 3,300 | Not Rated | 10° | 3 3/16" | 9 9/16" | -30° to 230° | __ | __ | __ | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Accepted Equipment | Antislip, Vibration Damping | 000000 | 00000 |
304 Stainless Steel with Rubber Cushion—One Mounting Hole | ||||||||||||||||
5/8"-11 | 5 7/8" | 4 5/16"-5 11/16" | 3,300 | Not Rated | 10° | 3 1/8" | 7 3/16" | -30° to 230° | No | 19/32" | __ | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Accepted Equipment | Antislip, Vibration Damping | 0000000 | 00000 |
5/8"-11 | 8 1/4" | 5 1/2"-8 1/16" | 3,300 | Not Rated | 10° | 3 1/8" | 9 9/16" | -30° to 230° | No | 19/32" | __ | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Accepted Equipment | Antislip, Vibration Damping | 0000000 | 00000 |
304 Stainless Steel with Rubber Cushion—Two Mounting Holes | ||||||||||||||||
5/8"-11 | 5 7/8" | 4"-5 3/8" | 6,800 | Not Rated | 9° | 3 1/8" | 6 7/8" | -30° to 230° | No | 11/32" | 2 1/4" | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Accepted Equipment | Antislip, Vibration Damping | 0000000 | 000000 |
5/8"-11 | 8 1/4" | 5 3/16"-7 3/4" | 5,400 | Not Rated | 9° | 3 1/8" | 9 1/4" | -30° to 230° | No | 11/32" | 2 1/4" | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Accepted Equipment | Antislip, Vibration Damping | 0000000 | 000000 |
Bolt-Down Swivel Vibration-Damping Leveling Mounts with Threaded Stud
Bolt these mounts down to keep your equipment stationary. Use them to minimize vibration and noise to prolong equipment life and protect floors. Mounts have a ball-and-socket design that swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection. They're made of stainless steel for corrosion resistance when exposed to water and most chemicals.
Mounts with one mounting hole are good for tight locations. Where space allows, those with two mounting holes add stability.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | Base Dia. | Base Ht. | Overall Ht. | Temperature Range, °F | Mounting Fasteners Included | Mount. Hole Dia. | Each | |
304 Stainless Steel with Rubber Cushion | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
One Mounting Hole | |||||||||||
5/8"-11 | 4" | 1,770 | 0.01" | 2 15/16" | 7/8" | 4 7/8" | 0° to 200° | No | 5/8" | 0000000 | 000000 |
5/8"-11 | 4" | 2,220 | 0.06" | 3 15/16" | 1 1/4" | 5 1/4" | 0° to 200° | No | 5/8" | 0000000 | 00000 |
5/8"-11 | 6" | 1,770 | 0.01" | 2 15/16" | 7/8" | 6 7/8" | 0° to 200° | No | 5/8" | 0000000 | 00000 |
5/8"-11 | 6" | 2,220 | 0.06" | 3 15/16" | 1 1/4" | 7 1/4" | 0° to 200° | No | 5/8" | 0000000 | 00000 |
Two Mounting Holes | |||||||||||
5/8"-11 | 4" | 1,770 | 0.06" | 2 15/16" | 7/8" | 4 7/8" | 0° to 200° | No | 5/8" | 00000000 | 00000 |
5/8"-11 | 6" | 1,770 | 0.06" | 2 15/16" | 7/8" | 6 7/8" | 0° to 200° | No | 5/8" | 00000000 | 00000 |
Swivel Vibration-Damping Leveling Mounts with Threaded Hole
Use these mounts to minimize vibration and noise to prolong machine life and protect floors. Their ball-and-socket design swivels to compensate for uneven floors. Add your own threaded stud or bolt to build a mount that fits your needs. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection. They're yellow zinc plated for corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Dp. | Capacity per Mount, lbs. | Deflection @ Capacity | Base Dia. | Overall Ht. | Hex Nut Wd. | Temp. Range, °F | Performance | Each | |
Yellow Zinc-Plated Steel with Black Rubber Cushion | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
5/8"-11 | 7/16" | 1,800 | 0.05" | 2 1/2" | 1 7/8" | 7/8" | -20° to 170° | Antislip, Vibration Damping | 0000000 | 000000 |
Yellow Zinc-Plated Steel with Brown Rubber Cushion | ||||||||||
5/8"-11 | 7/16" | 4,400 | 0.06" | 2 1/2" | 1 7/8" | 7/8" | -20° to 170° | Antislip, Vibration Damping | 0000000 | 00000 |
Extreme-Force Vibration-Damping Leveling Mounts with Threaded Stud
Higher deflection ratings translate to greater vibration and shock isolation than our other vibration-damping leveling mounts. These mounts have a rubber base that grips the floor for stability and is resistant to oil and grease. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | Base Dia. | Base Ht. | Overall Ht. | Hardness | Hardness Rating | Temperature Range, °F | Each | |
Rubber with Zinc-Plated Steel Stud and Steel Insert | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
5/8"-11 | 2 1/2" | 40 | 0.2" | 2 3/16" | 13/16" | 3 5/16" | Durometer 30A | Soft | -20° to 180° | 00000000 | 000000 |
5/8"-11 | 2 1/2" | 80 | 0.2" | 2 3/16" | 13/16" | 3 5/16" | Durometer 50A | Medium | -20° to 180° | 00000000 | 00000 |
5/8"-11 | 2 1/2" | 180 | 0.2" | 2 3/16" | 13/16" | 3 5/16" | Durometer 70A | Hard | -20° to 180° | 00000000 | 00000 |
Vibration-Damping Leveling Mounts with Threaded Hole
Higher deflection ratings translate to greater vibration and shock isolation than our other vibration-damping leveling mounts. These mounts have a rubber base that grips the floor for stability and is resistant to oil and grease. Add your own threaded stud or bolt to build a mount that fits your needs. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cover protect the insert from coming into contact with grease and oil.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Dp. | Capacity per Mount, lbs. | Deflection @ Capacity | Base Dia. | Base Ht. | Overall Ht. | Hardness | Hardness Rating | Temperature Range, °F | Each | |
Neoprene Rubber with Stainless Steel Insert and Stainless Steel Cover | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
5/8"-11 | 1" | 2,800 | 0.25" | 5 3/16" | 1 7/8" | 1 7/8" | Durometer 40A | Soft | -20° to 150° | 0000000 | 0000000 |
5/8"-11 | 1" | 4,200 | 0.24" | 5 3/16" | 1 7/8" | 1 7/8" | Durometer 60A | Medium | -20° to 150° | 0000000 | 000000 |
Vibration-Damping U-Bolts
Reduce vibration and noise in your lines—a plastic cushion tightly grips pipe, tubing, and conduit to prevent movement. All have nylon-insert locknuts, which grip the thread to resist loosening without damaging threads. Use to support heavy pipe, tube, and conduit from ceilings, walls, and poles.
Zinc-plated steel U-bolts have good corrosion resistance in most environments. 316 stainless steel U-bolts have excellent corrosion resistance and chemical resistance.
For technical drawings and 3-D models, click on a part number.
ID | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | For Pipe Size | Ht. | Thread Lg. | Capacity, lbs. | Ctr.-to-Ctr. | No.of Nuts Included | Temp. Range, °F | Each | |
Zinc Plated Steel | ||||||||||
5/8"-11 Thread Size | ||||||||||
6" | 152 | __ | 8 3/8" | 2" | 3,600 | 7 3/4" | 2 | -65° to 340° | 00000000 | 000000 |
6 5/8" | 168 | 6 | 8 3/4" | 2" | 3,600 | 7 3/4" | 2 | -65° to 340° | 00000000 | 00000 |
316 Stainless Steel | ||||||||||
5/8"-11 Thread Size | ||||||||||
6" | 152 | __ | 8 3/8" | 2" | 3,600 | 7 3/4" | 2 | -65° to 340° | 00000000 | 000000 |