Mount Type Mount Type |
---|
|
Thread Size Thread Size | Show |
---|
Thread Size Thread Size | Hide |
---|
Hardness Rating Hardness Rating |
---|
Material Material |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Reinforcement Type Reinforcement Type |
---|
|
Stud Material Stud Material |
---|
|
Core Material Core Material |
---|
|
Capacity per Mount Capacity per Mount |
---|
|
Maximum Load Maximum Load |
---|
|
Base Plate Material Base Plate Material |
---|
|
More
More
More
Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist these bumpers into a threaded hole.
Bumpers with a medium hardness rating offer a balance of cushioning and impact resistance.
Bumpers with a hard hardness rating withstand more impact than softer bumpers.
Rubber bumpers are abrasion resistant. Those with a soft rating can be used outdoors.
Stainless steel studs are more corrosion resistant than steel studs.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Lg. | OD | Ht. | Max. Load, lbs. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Nonmarking | Color | Stud Material | Each | |
Style 1 | |||||||||||||
Rubber with Steel Base Plate | |||||||||||||
M12 | 1.75 | 37mm | 75mm | 25mm | 2,170 | -40° to 170° | No | Medium | Yes | Black | Steel | 00000000 | 000000 |
M12 | 1.75 | 37mm | 75mm | 25mm | 4,670 | -40° to 170° | No | Hard | Yes | Black | Steel | 00000000 | 00000 |
M12 | 1.75 | 37mm | 75mm | 40mm | 1,500 | -40° to 170° | No | Medium | Yes | Black | Steel | 00000000 | 00000 |
M12 | 1.75 | 37mm | 75mm | 40mm | 2,060 | -40° to 170° | No | Hard | Yes | Black | Steel | 00000000 | 00000 |
M12 | 1.75 | 37mm | 75mm | 50mm | 980 | -10° to 150° | No | Medium | No | Black | Steel | 000000000 | 00000 |
M12 | 1.75 | 37mm | 75mm | 50mm | 3,040 | -40° to 170° | No | Hard | Yes | Black | Steel | 00000000 | 00000 |
Rubber with Stainless Steel Base Plate | |||||||||||||
M12 | 1.75 | 37mm | 75mm | 25mm | 2,170 | -40° to 170° | No | Medium | Yes | Black | Stainless Steel | 00000000 | 00000 |
M12 | 1.75 | 37mm | 75mm | 40mm | 1,500 | -40° to 170° | No | Medium | Yes | Black | Stainless Steel | 00000000 | 00000 |
M12 | 1.75 | 37mm | 75mm | 50mm | 980 | -10° to 150° | No | Medium | No | Black | Stainless Steel | 000000000 | 00000 |
Style 2 | |||||||||||||
Rubber with Steel Base Plate | |||||||||||||
M12 | 1.75 | 37mm | 70mm | 58mm | 340 | -40° to 170° | No | Medium | Yes | Black | Steel | 00000000 | 00000 |
M12 | 1.75 | 37mm | 70mm | 58mm | 440 | -40° to 170° | No | Hard | Yes | Black | Steel | 00000000 | 00000 |
M12 | 1.75 | 37mm | 75mm | 89mm | 440 | -40° to 170° | No | Medium | Yes | Black | Steel | 00000000 | 00000 |
M12 | 1.75 | 37mm | 75mm | 89mm | 570 | -40° to 170° | No | Hard | Yes | Black | Steel | 00000000 | 00000 |
Rubber with Stainless Steel Base Plate | |||||||||||||
M12 | 1.75 | 37mm | 70mm | 58mm | 340 | -40° to 170° | No | Medium | Yes | Black | Stainless Steel | 00000000 | 00000 |
M12 | 1.75 | 37mm | 75mm | 89mm | 440 | -40° to 170° | No | Medium | Yes | Black | Stainless Steel | 00000000 | 00000 |
All of these bumpers are reinforced with a steel core for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Twist them into a threaded hole. All are nonmarking and can be used outdoors.
Bumpers with a hard rating withstand high levels of impact. Bumpers with a medium-soft rating offer a balance of cushioning and impact resistance.
Neoprene bumpers have good abrasion resistance.
Polyurethane bumpers have better abrasion resistance than neoprene bumpers. They won't become brittle and crack when exposed to ozone.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Lg. | OD | Ht. | Overall Ht. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Each | |
Style 1 | |||||||||||||
Neoprene Rubber with Steel Core | |||||||||||||
M12 | 1.75 | 30mm | 32mm | 32mm | 62mm | -40° to 200° | Yes | Hard | Durometer 75A | No | Black | 00000000 | 000000 |
M12 | 1.75 | 30mm | 32mm | 32mm | 62mm | -40° to 200° | Yes | Medium Soft | Durometer 40A | No | Black | 00000000 | 00000 |
Polyurethane Rubber with Steel Core | |||||||||||||
M12 | 1.75 | 30mm | 32mm | 32mm | 62mm | -60° to 200° | Yes | Hard | Durometer 75A | No | Red | 00000000 | 00000 |
M12 | 1.75 | 30mm | 32mm | 32mm | 62mm | -60° to 200° | Yes | Medium Soft | Durometer 40A | No | Red | 0000000 | 00000 |
Mount these bumpers on a threaded stud. All are reinforced with a steel core or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. All of these bumpers can be used outdoors.
Bumpers with a hard rating withstand high levels of impact. Bumpers with a medium-soft rating offer a balance of cushioning and impact resistance.
Neoprene bumpers have good abrasion resistance.
Polyurethane bumpers have better abrasion resistance than neoprene bumpers. They won't become brittle and crack when exposed to ozone.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Pitch | Dp. | OD | Ht. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Each | |
Neoprene Rubber with Steel Core | ||||||||||||
M12 | 1.25 mm | 13mm | 32mm | 32mm | -40° to 200° | Yes | Hard | Durometer 75A | No | Black | 00000000 | 000000 |
M12 | 1.25 mm | 13mm | 32mm | 32mm | -40° to 200° | Yes | Medium Soft | Durometer 40A | No | Black | 00000000 | 00000 |
Polyurethane Rubber with Steel Core | ||||||||||||
M12 | 1.25 mm | 13mm | 32mm | 32mm | -40° to 200° | Yes | Hard | Durometer 85A | No | Red | 00000000 | 00000 |
M12 | 1.25 mm | 13mm | 32mm | 32mm | -40° to 200° | Yes | Medium Soft | Durometer 40A | No | Red | 0000000 | 00000 |
Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount these bumpers on a threaded stud.
Bumpers with a medium hardness rating offer a balance of cushioning and impact resistance.
Rubber bumpers are abrasion resistant. All are nonmarking. Those with a soft rating can be used outdoors.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Pitch | Dp. | OD | Ht. | Max. Load, lbs. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Each | |
Style 1 | |||||||||||||
Rubber with Steel Base Plate | |||||||||||||
M12 | 1.75 mm | 12mm | 75mm | 40mm | 1,010 | -20° to 150° | No | Medium | Durometer 55A | Yes | Black | 000000000 | 000000 |
M12 | 1.75 mm | 12mm | 75mm | 50mm | 980 | -20° to 150° | No | Medium | Durometer 55A | Yes | Black | 000000000 | 00000 |
Rubber with Stainless Steel Base Plate | |||||||||||||
M12 | 1.75 mm | 12mm | 75mm | 40mm | 1,010 | -20° to 150° | No | Medium | Durometer 55A | Yes | Black | 000000000 | 00000 |
M12 | 1.75 mm | 12mm | 75mm | 50mm | 980 | -20° to 150° | No | Medium | Durometer 55A | Yes | Black | 000000000 | 00000 |
Use these rubber sandwich mounts to minimize vibration between surfaces inside machinery and equipment, such as in circuit boards, small fans, compressors, and pumps. They're for use in compression and shear load applications.
Neoprene rubber has good resistance to weather and acids and moderate resistance to oils.
Natural rubber has superior resistance to tears and abrasion as well as good flexibility in cold temperatures.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Pitch, mm | Capacity per Mount, lbs. | Deflection @ Capacity | Shear Capacity per Mount, lbs. | Deflection @ Shear Capacity | Dia. | Ht. | Thread Lg. | Hardness | Hardness Rating | Temp. Range, °F | Each | |
Neoprene Rubber with Zinc-Plated Steel Stud | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
M12 | 1.75 | 668 | 0.15" | 199 | 0.31" | 3 1/8" | 1 1/2" | 1 1/4" | Durometer 50A | Medium | 10° to 180° | 0000000 | 000000 |
M12 | 1.75 | 720 | 0.4" | 140 | 0.3" | 3 1/8" | 2 1/4" | 1 1/4" | Durometer 50A | Medium | 10° to 180° | 0000000 | 00000 |
Natural Rubber with Zinc-Plated Steel Stud | |||||||||||||
M12 | 1.75 | 668 | 0.15" | 199 | 0.31" | 3 1/8" | 1 1/2" | 1 1/4" | Durometer 50A | Medium | -10° to 150° | 0000000 | 00000 |
M12 | 1.75 | 720 | 0.4" | 140 | 0.3" | 3 1/8" | 2 1/4" | 1 1/4" | Durometer 50A | Medium | -10° to 150° | 0000000 | 00000 |
Use these rubber sandwich mounts to minimize vibration between surfaces inside machinery and equipment, such as in circuit boards, small fans, compressors, and pumps. They're for use in compression and shear load applications.
Neoprene rubber has good resistance to weather and acids and moderate resistance to oils.
Natural rubber has superior resistance to tears and abrasion as well as good flexibility in cold temperatures.
For technical drawings and 3-D models, click on a part number.
Thread Size | Capacity per Mount, lbs. | Deflection @ Capacity | Shear Capacity per Mount, lbs. | Deflection @ Shear Capacity | Dia. | Ht. | Thread Lg. | Thread Dp. | Hardness | Temperature Range, °F | Each | |
Neoprene Rubber with Zinc-Plated Steel Stud and Steel Insert | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
M12 | 720 | 0.4" | 140 | 0.3" | 3 1/8" | 2 1/4" | 1 1/4" | 9/16" | Durometer 50A | 10° to 180° | 0000000 | 000000 |
Natural Rubber with Zinc-Plated Steel Stud and Steel Insert | ||||||||||||
M12 | 720 | 0.4" | 140 | 0.3" | 3 1/8" | 2 1/4" | 1 1/4" | 9/16" | Durometer 50A | -10° to 150° | 0000000 | 00000 |
Use these rubber sandwich mounts to minimize vibration between surfaces inside machinery and equipment, such as in circuit boards, small fans, compressors, and pumps. They're for use in compression and shear load applications.
Neoprene rubber has good resistance to weather and acids and moderate resistance to oils.
Natural rubber has superior resistance to tears and abrasion as well as good flexibility in cold temperatures.
For technical drawings and 3-D models, click on a part number.
Thread Size | Capacity per Mount, lbs. | Deflection @ Capacity | Shear Capacity per Mount, lbs. | Deflection @ Shear Capacity | Dia. | Ht. | Thread Dp. | Hardness | Hardness Rating | Temperature Range, °F | Each | |
Neoprene Rubber with Steel Insert | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
M12 | 720 | 0.4" | 140 | 0.3" | 3 1/8" | 2 1/4" | 9/16" | Durometer 50A | Medium | 10° to 180° | 0000000 | 000000 |
Natural Rubber with Steel Insert | ||||||||||||
M12 | 720 | 0.4" | 140 | 0.3" | 3 1/8" | 2 1/4" | 9/16" | Durometer 50A | Medium | -10° to 150° | 0000000 | 00000 |
Made of stainless steel and rubber, these mounts resist corrosion from water and most chemicals. Natural rubber is resistant to tears and abrasion and has good flexibility in cold temperatures. Use mounts to minimize vibration between surfaces inside machinery and equipment, such as in circuit boards, small fans, compressors, and pumps. They're for use in compression and shear load applications.
For technical drawings and 3-D models, click on a part number.
Thread Size | Capacity per Mount, lbs. | Deflection @ Capacity | Shear Capacity per Mount, lbs. | Deflection @ Shear Capacity | Dia. | Ht. | Thread Lg. | Thread Dp. | Hardness | Temperature Range, °F | Each | |
Natural Rubber with 304 Stainless Steel Stud and Insert | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
M12 | 720 | 0.4" | 140 | 0.3" | 3 1/8" | 2 1/4" | 1 1/2" | 1/2" | Durometer 50A | -10° to 150° | 00000000 | 000000 |
Made of stainless steel and rubber, these mounts resist corrosion from water and most chemicals. Natural rubber is resistant to tears and abrasion and has good flexibility in cold temperatures. Use mounts to minimize vibration between surfaces inside machinery and equipment, such as in circuit boards, small fans, compressors, and pumps. They're for use in compression and shear load applications.
For technical drawings and 3-D models, click on a part number.
Thread Size | Capacity per Mount, lbs. | Deflection @ Capacity | Shear Capacity per Mount, lbs. | Deflection @ Shear Capacity | Dia. | Ht. | Thread Lg. | Hardness | Hardness Rating | Temp. Range, °F | Each | |
Natural Rubber with 304 Stainless Steel Stud | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
M12 | 720 | 0.4" | 140 | 0.3" | 3 1/8" | 2 1/4" | 1 1/2" | Durometer 50A | Medium | -10° to 150° | 0000000 | 000000 |
Made of stainless steel and rubber, these mounts resist corrosion from water and most chemicals. Natural rubber is resistant to tears and abrasion and has good flexibility in cold temperatures. Use mounts to minimize vibration between surfaces inside machinery and equipment, such as in circuit boards, small fans, compressors, and pumps. They're for use in compression and shear load applications.
For technical drawings and 3-D models, click on a part number.
Thread Size | Capacity per Mount, lbs. | Deflection @ Capacity | Shear Capacity per Mount, lbs. | Deflection @ Shear Capacity | Dia. | Ht. | Thread Dp. | Hardness | Hardness Rating | Temperature Range, °F | Each | |
Natural Rubber with 304 Stainless Steel Insert | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
M12 | 720 | 0.4" | 140 | 0.3" | 3 1/8" | 2 1/4" | 1/2" | Durometer 50A | Medium | -10° to 150° | 0000000 | 000000 |
All-stainless steel construction stands up to water and chemicals and won't rust or corrode. Use these mounts to minimize vibration and noise to prolong machine life and protect floors. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Pitch, mm | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | Base Dia. | Overall Ht. | Temperature Range, °F | |
304 Stainless Steel with Rubber Cushion | ||||||||
---|---|---|---|---|---|---|---|---|
M12 | 1.75 | 4 3/4" | 500 | 0.07" | 2 5/8" | 5 11/16" | 0° to 200° | 0000000 |
M12 | 1.75 | 4 3/4" | 1,000 | 0.12" | 3 7/8" | 6 1/8" | 0° to 200° | 0000000 |
M12 | 1.75 | 4 3/4" | 2,000 | 0.12" | 3 7/8" | 6 1/8" | 0° to 200° | 0000000 |
Higher deflection ratings translate to greater vibration and shock isolation. These mounts have a rubber base that grips the floor for stability and is resistant to oil and grease. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Pitch, mm | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | Swivel Range of Motion | Base Lg. | Base Wd. | Base Ht. | Overall Ht. | Hardness | Hardness Rating | Temp. Range, °F | Each | |
Rubber with Zinc-Plated Steel Stud | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
M12 | 1.75 | 2 5/8" | 350 | 0.13" | 7.5° | 3" | 3" | 5/8" | 3 1/8" | Durometer 50A | Medium | -20° to 180° | 00000000 | 000000 |
M12 | 1.75 | 2 5/8" | 700 | 0.13" | 7.5° | 3" | 3" | 5/8" | 3 1/8" | Durometer 70A | Hard | -20° to 180° | 00000000 | 00000 |
Thread Size | Thread Pitch, mm | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | Swivel Range of Motion | Base Dia. | Base Ht. | Overall Ht. | Hardness | Hardness Rating | Temp. Range, °F | Each | |
Rubber with Zinc-Plated Steel Stud | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
M12 | 1.75 | 2 5/8" | 500 | 0.13" | 7.5° | 3" | 3/4" | 3 1/4" | Durometer 50A | Medium | -20° to 180° | 00000000 | 000000 |
M12 | 1.75 | 2 5/8" | 1,000 | 0.13" | 7.5° | 3" | 3/4" | 3 1/4" | Durometer 70A | Hard | -20° to 180° | 00000000 | 00000 |
Bolt these mounts down to keep your equipment stationary. Use them to minimize vibration and noise to prolong equipment life and protect floors. Mounts have a ball-and-socket design that swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection. They're made of stainless steel for corrosion resistance when exposed to water and most chemicals.
Mounts with one mounting hole are good for tight locations.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Pitch, mm | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | Base Dia. | Base Ht. | Overall Ht. | Temperature Range, °F | Mounting Fasteners Included | Mount. Hole Dia. | Each | |
304 Stainless Steel with Rubber Cushion | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
One Mounting Hole | ||||||||||||
M12 | 1.75 | 3 15/16" | 1,770 | 0.06" | 2 15/16" | 7/8" | 4 13/16" | 0° to 200° | No | 5/8" | 00000000 | 000000 |
These mounts bolt to your mounting surface to keep your equipment stationary. Use them in compression load applications with rotating equipment such as fans, blowers, pumps, compressors, and generators.
Neoprene rubber has good resistance to oil and gasoline.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Pitch, mm | Capacity per Mount, lbs. | Deflection @ Capacity | O'all Ht. | Dia. | Base Lg. | Base Wd. | Hardness | Temperature Range, °F | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Each | ||
Black Neoprene Rubber with Steel Base | ||||||||||||||||
4 | M12 | 1.75 | 700 | 0.25" | 1.61" | 3.125" | 5.125" | 3" | Durometer 40A | -20° to 180° | No | 2 | 0.44" | 4.125" | 000000000 | 000000 |
4 | M12 | 1.75 | 1,000 | 0.25" | 1.61" | 3.125" | 5.125" | 3" | Durometer 50A | -20° to 180° | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
4 | M12 | 1.75 | 1,500 | 0.25" | 1.61" | 3.125" | 5.125" | 3" | Durometer 60A | -20° to 180° | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
4 | M12 | 1.75 | 2,500 | 0.25" | 1.61" | 3.125" | 5.125" | 3" | Durometer 70A | -20° to 180° | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
An interlocking steel frame in these mounts prevents collapse, even if the rubber fails. They minimize vibration and noise from machinery to reduce maintenance costs, prolong equipment life, and protect floors. Use the holes in the base to bolt down these mounts to keep your equipment stationary. Neoprene rubber has good resistance to oil and gasoline.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Pitch, mm | Capacity per Mount, lbs. | Deflection @ Capacity | O'all Ht. | Dia. | Base Lg. | Base Wd. | Hardness | Temp. Range, °F | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Each | |
Neoprene Rubber with Steel Base | |||||||||||||||
M12 | 1.75 | 470 | 0.13" | 1.78" | 2.42" | 5.5" | 3.37" | Durometer 30A | 10° to 180° | No | 2 | 0.51" | 4.12" | 000000000 | 000000 |
M12 | 1.75 | 715 | 0.13" | 1.78" | 2.42" | 5.5" | 3.37" | Durometer 40A | 10° to 180° | No | 2 | 0.51" | 4.12" | 000000000 | 00000 |
M12 | 1.75 | 940 | 0.13" | 1.78" | 2.42" | 5.5" | 3.37" | Durometer 50A | 10° to 180° | No | 2 | 0.51" | 4.12" | 000000000 | 00000 |
M12 | 1.75 | 1,064 | 0.13" | 1.78" | 2.42" | 5.5" | 3.37" | Durometer 60A | 10° to 180° | No | 2 | 0.51" | 4.12" | 000000000 | 00000 |
Connect these mounts to your air supply for vibration and shock isolation in compression load applications. They handle the high impact of equipment such as punch presses, blowers, forging hammers, shakers, vibrators, and air compressors. Use the holes in the base to bolt down these mounts to keep your equipment stationary. Neoprene rubber has good resistance to oil and gasoline. You can add or release air for leveling (±1/4" adjustment).
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Capacity per Mount, lbs. | Deflection @ Capacity | O'all Ht. | Dia. | Ht. | Base Lg. | Base Wd. | Hardness | Max. Pressure, psi | Temperature Range, °F | Features | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Each | |
Neoprene Rubber with Aluminum Base and Aluminum Plate | |||||||||||||||||
M12 | 300 | 0.5" | 2.5" | 4.14" | 1.94" | 4.19" | 4.19" | Durometer 65A | 85 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 3.5" | 00000000 | 000000 |
M12 | 550 | 0.5" | 3.5" | 5" | 2.94" | 5.13" | 5.13" | Durometer 65A | 85 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 4.25" | 00000000 | 000000 |
M12 | 1,200 | 0.5" | 3.5" | 6.74" | 2.94" | 6.88" | 6.88" | Durometer 65A | 85 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 6" | 00000000 | 000000 |