Long-Life Grinding Bits for Nonmetals
The diamond abrasive in these bits is extremely hard and lasts longer than tungsten carbide. For longer tool life and improved finish, use a water- or oil-soluble mist or coolant.
Bits are also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Head | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Max. Speed, rpm | Shape | Abrasive Material | O'all Lg. | Grit (Surface Texture) | Each | ||
For Carbide, Ceramics, Glass | |||||||||
1/4" Shank Dia. | |||||||||
| 8 | 0.19" | 0.1" | 18,600 | Flat-Top Cone | Diamond | 2" | 120 (Smooth) Silver | 0000000 | 000000 |
| 8 | 0.25" | 0.1" | 18,600 | Flat-Top Cone | Diamond | 2" | 120 (Smooth) Silver | 0000000 | 00000 |
| 8 | 0.5" | 0.2" | 30,000 | Flat-Top Cone | Diamond | 2" | 120 (Smooth) Silver | 0000000 | 00000 |
Rubber-Cushioned Abrasive Grinding Bits for Metals
The abrasive grains in these bits are blended with rubber, which cushions during grinding to produce a smoother surface texture than other bits with similar grits. Bits are also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
Bits for steel are aluminum oxide, which is the most common abrasive used in grinding metal.
Bits for aluminum, brass, and bronze are silicon carbide, which cuts through soft metals without generating much heat or causing material buildup.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Head | Abrasive | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Max. Speed, rpm | Shape No. | Shape | Material | Bond Material | Shank Lg. | Choose a Grit (Surface Texture) | Each | ||
For Steel | |||||||||||
1/8" Shank Dia. | |||||||||||
| 6 | 1/8" | 1/4" | 35,000 | B96 | Flat-Top Cone | Aluminum Oxide | Rubber | 1 1/2" | 00000000 | 000000 | |
| 6 | 1/8" | 3/8" | 35,000 | B97 | Flat-Top Cone | Aluminum Oxide | Rubber | 1 1/2" | 00000000 | 00000 | |
For Aluminum, Brass, Bronze | |||||||||||
1/8" Shank Dia. | |||||||||||
| 6 | 1/8" | 1/4" | 35,000 | B96 | Flat-Top Cone | Silicon Carbide | Rubber | 1 1/2" | 00000000 | 00000 | |
| 6 | 1/8" | 3/8" | 35,000 | B97 | Flat-Top Cone | Silicon Carbide | Rubber | 1 1/2" | 00000000 | 00000 | |
Grinding Bits for Metals
Made of aluminum oxide, these bits are well suited for use on most metals and materials that are not heat sensitive.
Bits are also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Head | Abrasive | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Max. Speed, rpm | Shape No. | Material | Bond Material | Shank Lg. | Choose a Grit (Surface Texture) | Pkg. Qty. | Pkg. | ||
1/8" Shank Dia. | |||||||||||
For Steel | |||||||||||
| 17 | 1/8" | 3/16" | 105,000 | B95 | Aluminum Oxide | Vitrified Ceramic | 1 1/2" | 100 (Smooth) Blue | 1 | 00000000 | 00000 |
| 17 | 11/64" | 3/32" | 105,000 | B94 | Aluminum Oxide | Vitrified Ceramic | 1 1/2" | 100 (Smooth) Blue | 1 | 00000000 | 0000 |
| 17 | 3/16" | 3/16" | 105,000 | B93 | Aluminum Oxide | Vitrified Ceramic | 1 1/2" | 100 (Smooth) Blue | 1 | 00000000 | 0000 |
For Steel, Stainless Steel, Iron | |||||||||||
| 17 | 3/32" | 1/4" | 105,000 | B98 | Aluminum Oxide | Vitrified Clay | 1 1/2" | 5 | 00000000 | 0000 | |
| 17 | 1/8" | 1/4" | 105,000 | B96 | Aluminum Oxide | Vitrified Clay | 1 1/2" | 5 | 00000000 | 0000 | |
| 17 | 1/8" | 3/8" | 105,000 | B97 | Aluminum Oxide | Vitrified Clay | 1 1/2" | 5 | 00000000 | 00000 | |
| 17 | 1/4" | 1/4" | 81,370 | B92 | Aluminum Oxide | Vitrified Clay | 1 1/2" | 5 | 00000000 | 0000 | |
| 17 | 1/2" | 5/8" | 34,500 | B91 | Aluminum Oxide | Vitrified Clay | 1 1/2" | 5 | 00000000 | 00000 | |
| 18 | 7/16" | 3/4" | 45,370 | B51 | Aluminum Oxide | Vitrified Clay | 1 1/2" | 5 | 00000000 | 00000 | |
| 19 | 3/8" | 3/4" | 33,750 | B54SS | Aluminum Oxide | Vitrified Clay | 1 1/2" | 5 | 00000000 | 00000 | |
1/4" Shank Dia. | |||||||||||
For Steel, Stainless Steel, Iron | |||||||||||
| 19 | 3/4" | 2 1/2" | 19,800 | A1 | Aluminum Oxide | Vitrified Clay | 1 1/2" | 5 | 00000000 | 00000 | |
| 19 | 13/16" | 1 3/4" | 18,750 | A1SS | Aluminum Oxide | Vitrified Clay | 1 1/2" | 5 | 00000000 | 00000 | |
| 19 | 1" | 2 1/2" | 16,100 | A1SS | Aluminum Oxide | Vitrified Clay | 1 1/2" | 5 | 00000000 | 00000 | |
| 20 | 1" | 3/8" | 38,200 | A35 | Aluminum Oxide | Vitrified Clay | 1 1/2" | 5 | 00000000 | 00000 | |
| 20 | 1 1/2" | 3/8" | 25,470 | A34 | Aluminum Oxide | Vitrified Clay | 1 1/2" | 5 | 00000000 | 00000 | |
| 21 | 3/4" | 1 1/8" | 39,000 | A6 | Aluminum Oxide | Vitrified Clay | 1 1/2" | 5 | 00000000 | 00000 | |
| 22 | 1" | 1 1/4" | 38,200 | A2 | Aluminum Oxide | Vitrified Clay | 1 1/2" | 5 | 00000000 | 00000 | |
High-Performance Grinding Bits for Metals
Made of ceramic alumina, these bits prevent material and heat buildup better than bits made of boron nitride and aluminum oxide when used on steel, stainless steel, iron, and titanium. They also last longer than boron nitride bits, so they’re the best choice for high-volume applications. Also known as mounted points and die grinder bits.
Head diameter is measured at the widest point.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Head | Abrasive | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Max. Speed, rpm | Shape No. | Shape | Material | Bond Material | Shank Lg. | Grit (Surface Texture) | Each | ||
For Iron, Stainless Steel, Steel, Titanium | |||||||||||
1/8" Shank Dia. | |||||||||||
| 1 | 1/8" | 3/8" | 81,550 | B97 | Flat-Top Cone | Ceramic Alumina | Vitrified Clay | 1 1/2" | 80 (Smooth) Green | 0000000 | 00000 |
Grinding Bits for Stainless Steel
Bits are specially formulated to stay cool during grinding, so they won’t mar or discolor stainless steel. They are also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
Zirconia alumina bits grind faster and last longer than aluminum oxide bits.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Head | Abrasive | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Max. Speed, rpm | Shape No. | Shape | Material | Bond Material | Shank Lg. | Grit (Surface Texture) | Each | ||
For Stainless Steel | |||||||||||
1/8" Shank Dia. | |||||||||||
| 2 | 1/8" | 3/8" | 105,000 | B97 | Flat-Top Cone | Aluminum Oxide | Vitrified Ceramic | 1 1/2" | 120 (Smooth) Pink | 00000000 | 00000 |
| 2 | 1/4" | 5/8" | 60,000 | B53 | Flat-Top Cone | Aluminum Oxide | Vitrified Ceramic | 1 1/2" | 100 (Smooth) Pink | 00000000 | 0000 |
1/4" Shank Dia. | |||||||||||
| 2 | 3/4" | 2 1/2" | 19,800 | A1 | Flat-Top Cone | Aluminum Oxide | Vitrified Ceramic | 1 1/2" | 60 (Rough) Pink | 00000000 | 0000 |
| 2 | 3/4" | 2 1/2" | 19,800 | A1 | Flat-Top Cone | Zirconia Alumina | Synthetic Resin | 1 1/2" | 30 (Rough) Gray | 00000000 | 00000 |
Miniature Grinding Bits for Metals
The small 3/32" diameter shank and small head makes these bits good for precise and intricate jobs.
Bits are aluminum oxide, which is the most common abrasive used in grinding metal. They are also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Head | Abrasive | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Max. Speed, rpm | Shape | Material | Bond Material | Shank Lg. | Grit (Surface Texture) | Each | ||
For Steel, Stainless Steel, Aluminum, Brass, Bronze, Copper, Iron, Nickel, Titanium | ||||||||||
3/32" Shank Dia. | ||||||||||
| 6 | 1/8" | 13/32" | 35,000 | Flat-Top Cone | Aluminum Oxide | Vitrified Clay | 1 1/2" | 120 (Smooth) Red | 0000000 | 00000 |
| 6 | 1/8" | 13/32" | 35,000 | Flat-Top Cone | Aluminum Oxide | Vitrified Clay | 1 1/2" | 400 (Extra Smooth) White | 0000000 | 0000 |