The screw connections on these bushings easily mate to compatible quick-disconnect sprockets and pulleys. Bushings fit quick-disconnect (QD) sprockets and pulleys of the same bushing style. As you tighten the included screws, the bushing grips the shaft and pulls it into the sprocket or pulley.

For technical drawings and 3-D models, click on a part number.

Mount these hubless bushings flush into your sprocket or pulley for a slim profile with no protruding screws. They are for use with taper-lock sprockets of the same bushing style. As you tighten the included set screws, the bushing grips the shaft and pulls it into your sprocket or pulley.

For technical drawings and 3-D models, click on a part number.

A mounting flange prevents movement during tightening, so it's easy to center these bushings in your sprocket. They are also good for shock loads. When you tighten the included screws, the bushing's inner sleeve contracts onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear. They can be mounted on shafts with or without keyways.

For technical drawings and 3-D models, click on a part number.

Insert these bushings into the bore of your sprocket for flush or recessed mounting. They handle shock loads and have higher torque ratings than self-centering bushings. When you tighten the included clamping screws, the bushing's inner sleeve contracts onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear. They can be mounted on shafts with or without keyways.

For technical drawings and 3-D models, click on a part number.

A threaded lever lets you tighten these collars with more torque than other quick-release styles, ensuring that they stay put on your shaft. Use them to quickly move components or make setup changes, such as on packing equipment, printers, or label feeding machines. To make adjustments in tight spaces, lift the lever and twist to the side. Similar to a ratchet, you can lift the lever to disengage from the threads and reposition.

Black oxide steel collars are very strong, but will rust if exposed to moisture.

Anodized aluminum is strong and lightweight. It can withstand humidity without rusting, but water left on the surface will cause it to corrode.

303 stainless steel collars can handle frequent exposure to water without rusting.

These metal collars are stronger than plastic shaft collars. The two-piece design allows you to install them anywhere on a shaft without removing components or having access to the ends of the shaft. Collars clamp evenly around the shaft to create a strong, mar-free hold. Tighten the clamping screws to secure.

Black-oxide steel collars have some corrosion resistance. Zinc-plated steel and chrome-plated steel collars have moderate corrosion resistance with a bright finish. Aluminum collars are lightweight and have good corrosion resistance. 303 stainless steel collars have excellent corrosion resistance. 316 stainless steel collars have excellent corrosion and chemical resistance.

For technical drawings and 3-D models, click on a part number.

Make quick adjustments to these shaft collars with a lever on the side. Often used on packing equipment, printers, and label feeding machines, these collars are used to quickly move components or make setup changes. To make adjustments in tight spaces, lift the lever and twist to either side. Similar to a ratchet, you can tighten and loosen with the lever down; lift the lever to disengage from the threads and reposition. The two pieces of the collar separate, so you can install them anywhere on a shaft without removing components or having access to the end.

Black oxide steel collars are very strong, but will rust if exposed to moisture.

Anodized aluminum is strong and lightweight. It can withstand humidity without rusting, but water left on the surface will cause it to corrode.

303 stainless steel collars can handle frequent exposure to water without rusting.

Tighten the set screw to bite into an unhardened shaft for a secure hold. The two-piece design allows you to install these collars anywhere on a shaft without removing components or having access to the ends of the shaft. Clamping screws provide extra grip.

Carbon steel collars are strong and wear resistant. Their black-oxide finish is somewhat corrosion resistant, but only in dry environments. Their dark color can be useful for matching other parts in your system.

For technical drawings and 3-D models, click on a part number.

Designed to grip evenly around your shaft, clamping couplings provide more holding power than set screw couplings without marring the shaft. Slide onto the end of your shaft and tighten the clamping screws to secure. Good for high-torque applications, rigid couplings connect two shafts that are aligned, allowing for no relative movement between the shafts.

Stainless steel couplings have excellent corrosion resistance.

For technical drawings and 3-D models, click on a part number.

When your shafts are not close enough to use standard couplings, these have the length to bridge the gap. Install them anywhere on a shaft without removing components or having access to the ends of the shaft. Tighten the clamping screws to secure. Good for high-torque applications, rigid couplings connect two shafts that are aligned, allowing for no relative movement between the shafts.

For technical drawings and 3-D models, click on a part number.