Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

The oil in these bearings is suitable for incidental contact with food.

Embedded with lubricant that’s FDA compliant for incidental food contact, these bearings are good for high-load applications such as bottling and filling lines in food plants.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.

These bearings stand up to a wider range of chemicals than other dry-running flanged sleeve bearings.

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise.

Unlike other sleeve bearings, these do not need to be fully inserted into a housing. Their unique shape creates a permanent, secure hold in thin panels.

Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings.

Graphite provides a layer of dry lubrication that can operate in high-temperature environments.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

The oil in these bearings is suitable for incidental contact with food.

Use these bearings for frequent starts and stops in high-load applications. For low friction coefficients, they release a thin layer of an embedded PTFE lubricant during startup friction.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

These nylon bearings swivel inside their housing to compensate for over 20° of shaft misalignment.

Embedded lubricant particles increase the load capacity of these bearings while also making them slippery.

Handling speeds twice as fast as standard mounted sleeve bearings while limiting wear on your system, these bearings are made of PTFE-filled acetal.

The tapered barrel on these bushings is split on both sides, allowing them to contract more tightly around the shaft than quick-disconnect and taper-lock bushings.

A mounting flange prevents movement during tightening, so it's easy to center these bushings in your sprocket.

These metal collars are stronger than plastic shaft collars.

Installing and removing a collar is as easy as pushing down and lifting up a clamp lever.

Wider than standard shaft collars with twice the number of clamping screws, these ensure a better grip for greater holding power.

Suitable for use in washdown applications, these plastic collars also offer good chemical resistance.

Use a wrench to rotate your drive shaft without marring or gouging the shaft.

Make quick adjustments to these shaft collars with a lever on the side.

Two tapped holes on the face of these collars allow you to fasten them to gears, pulleys, and sprockets.

Secure items to either side of these collars—each half has a flat end with a tapped hole

One end has a finished bore size; the other can be machined to any size—great for connecting to uncommon shaft sizes and shafts that are undersized from wear or oversized from coatings.

These couplings have the gripping strength to handle higher torque than most other couplings.

These couplings have the gripping strength to handle higher torque than most other couplings.

Each hub includes a set screw (unless noted), which bites into your shaft to hold the coupling in place.

Designed for use in food-processing applications, where a fraying spider could contaminate a batch, these couplings have a metal-detectable rubber spider. Small pieces of metal inside the rubber will set off a metal detector, alerting you to the problem.

Designed to grip evenly around your shaft, these couplings provide more holding power than set screw couplings without marring the shaft.

Connect shafts and ball screws to high-speed servomotors and stepper motors—these shaft couplings handle four times more speed than standard servomotor couplings.

Ridges on the inside of these bearings wipe away dust and debris as the bearing travels on a shaft.

A ceramic liner makes high speeds as well as rapid acceleration and deceleration possible.

Use ball bearings in debris-free environments and when speed is a necessity. They operate with less friction than sleeve bearings, so you can run them at higher speeds.

The choice for low-friction motion in high-temperature environments.

Sleeve bearings outperform ball bearings in dirty environments. Use them for low speed applications.

Ball bearings create less friction than sleeve bearings, so they require less force to operate.

With a grooved inner diameter, these bearings are designed to work with splined shafts. Together, they transmit rotary power while allowing the bearing to move freely along the length of the shaft. All are for use where shaft misalignment is unlikely.