Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

The oil in these bearings is suitable for incidental contact with food.

Embedded with lubricant that’s FDA compliant for incidental food contact, these bearings are good for high-load applications such as bottling and filling lines in food plants.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.

An aluminum shell adds strength.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise.

Use these bearings for frequent starts and stops in high-load applications.

Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings.

A metal shell adds strength.

Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Made of 863 bearing bronze and embedded with NSF registered H1 oil, these bearings can tackle high-load applications in food plants, such as bottling and filling lines.

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

These nylon bearings swivel inside their housing to compensate for over 20° of shaft misalignment.

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.

Use these nylon or acetal bearings for light loads. The closed backing blocks out dust and other contaminants.

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.

Mount these hubless bushings flush into your sprocket or pulley for a slim profile with no protruding screws.

Also known as Trantorque bushings, these tighten with a twist of the collar nut—no screws needed.

Insert these bushings into the bore of your sprocket for flush or recessed mounting.

These metal collars are stronger than plastic shaft collars.

Installing and removing a collar is as easy as pushing down and lifting up a clamp lever.

Wider than standard shaft collars with twice the number of clamping screws, these ensure a better grip for greater holding power.

Suitable for use in washdown applications, these plastic collars also offer good chemical resistance.

Use a wrench to rotate your drive shaft without marring or gouging the shaft.

Make quick adjustments to these shaft collars with a lever on the side.

Two tapped holes on the face of these collars allow you to fasten them to gears, pulleys, and sprockets.

Secure items to either side of these collars—each half has a flat end with a tapped hole

Designed to grip evenly around your shaft, clamping couplings provide more holding power than set screw couplings without marring the shaft.

These couplings have the gripping strength to handle higher torque than most other couplings.

These couplings have the gripping strength to handle higher torque than most other couplings.

Each hub includes a set screw (unless noted), which bites into your shaft to hold the coupling in place.

Designed for use in food-processing applications, where a fraying spider could contaminate a batch, these couplings have a metal-detectable rubber spider. Small pieces of metal inside the rubber will set off a metal detector, alerting you to the problem.

Each hub includes a set screw, which bites into your shaft to hold the coupling in place.

Connect shafts and ball screws to high-speed servomotors and stepper motors—these shaft couplings handle four times more speed than standard servomotor couplings.

Ridges on the inside of these bearings wipe away dust and debris as the bearing travels on a shaft.

When clearance is a concern, choose these ultra-thin sleeve bearings.

Use these ultra-thin sleeve bearings in high-speed applications where clearance is a concern.

The choice for low-friction motion in high-temperature environments.

Sleeve bearings outperform ball bearings in dirty environments. Use them for low speed applications.

These bearings have a ceramic liner to help them achieve high speeds as well as rapid acceleration and deceleration.

The choice for low-friction motion in high-temperature environments.

With a grooved inner diameter, these bearings are designed to work with splined shafts. Together, they transmit rotary power while allowing the bearing to move freely along the length of the shaft. All are for use where shaft misalignment is unlikely.