A smooth base provides more contact with the mating surface than weld nuts with projections.

These nuts have three mounting holes to accept screws and rivets for use with thin materials.

A nonconductive rubber coating insulates the nut from electricity, seals out moisture, and damps vibration.

These aluminum rivet nuts are one-third the weight of steel rivet nuts and have mild corrosion resistance.

These rivet nuts are mildly corrosion resistant.

About twice as strong as aluminum rivet nuts, these low-profile rivet nuts have a cadmium or tin-zinc plating for corrosion resistance.

These low-profile rivet nuts are one-third the weight of steel and have mild corrosion resistance.

Stainless steel nuts have excellent corrosion resistance in most environments.

A black-phosphate finish provides mild corrosion resistance.

These inserts are made to stringent military specifications.

Forming the strongest hold of any of our threaded inserts, these inserts have a distorted internal thread to lock screws into place and keys that drive into surrounding material to prevent slipping and rotating.

Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.

A dry film keeps the screw from sticking or binding in these inserts during installation.

Made of nickel alloy, these inserts are more resistant to acids and salt water than stainless steel inserts.

Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.

Inserts come with a through-hole tap and installation tool.

Without a prong to break off and retrieve, these inserts are often used where debris could cause damage.

A distorted thread grips the screw to resist loosening.

Made of 18-8 stainless steel, these inserts have better corrosion resistance than black-phosphate steel.

These inserts cut their own threads in soft metals such as aluminum, so there's no need to tap the hole. Also known as Tap-Lok inserts.

Made from brass, these inserts are nonmagnetic, corrosion resistant, and electrically conductive.

These aluminum inserts are 70% lighter than brass inserts, electrically conductive, and nonmagnetic. They have good corrosion resistance, which is comparable to brass but not as good as stainless steel.

These 18-8 stainless steel inserts have better corrosion resistance than brass inserts and may be mildly magnetic.

The flange keeps these inserts from pulling through a hole. Press them in from the underside of material, and install a screw from the top of material.

These 18-8 stainless steel inserts have better corrosion resistance than aluminum inserts and may be mildly magnetic.

70% lighter than stainless steel, these aluminum inserts are mildly corrosion resistant and nonmagnetic.

The tapered shape makes it easier to guide these inserts into a hole during installation. Use a drill bit to create a straight hole, then taper the top half.

Install these inserts into plastic parts to create a secure base for fasteners.

Made from brass, these inserts are nonmagnetic, mildly corrosion resistant, and electrically conductive.

Assortments include various sizes of tapping inserts for hardwood.

These 18-8 stainless steel tee nut inserts have better corrosion resistance than zinc-plated steel tee nut inserts.

These rivet nuts have a smooth body and fit in smaller holes than twist-resistant rivet nuts. Assortments include rivet nuts, mandrels, nosepieces, and a plier-style installation tool.

Twist these bumpers into a threaded hole. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount these bumpers on a threaded stud.