These inserts are made to stringent military specifications. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts. Use them to repair or change threads in soft metals such as aluminum. Inserts may be mildly magnetic. They’re comparable to Keensert® inserts. Installation requires a drill bit, a standard tap, an installation tool, and a hammer.

Choose inserts with a thick wall for greater strength than thin-wall inserts, or to fill a large hole.

For technical drawings and 3-D models, click on a part number.

Made of stainless steel, these inserts have good corrosion resistance. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts. Use them to repair or change threads in soft metals such as aluminum. Inserts may be mildly magnetic. They’re comparable to Keensert® inserts. Installation requires a drill bit, a standard tap, an installation tool, and a hammer.

Choose inserts with a thick wall for greater strength than thin-wall inserts, or to fill a large hole.

Inserts with an extra-thick wall are stronger than thick- and thin-wall inserts. Use them to reduce the size of tapped holes.

For technical drawings and 3-D models, click on a part number.

A black-phosphate finish provides mild corrosion resistance. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts. Use them to repair or change threads in soft metals such as aluminum. They’re comparable to Keensert® inserts. Installation requires a drill bit, a standard tap, an installation tool, and a hammer.

Choose inserts with a thick wall for greater strength than thin-wall inserts, or to fill a large hole with stripped threads.

Inserts with an extra thick wall are stronger than thick- and thin-wall inserts. Use them to reduce the size of tapped holes.

For technical drawings and 3-D models, click on a part number.

The strongest key-locking inserts we offer, these inserts are made to stringent military specifications. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts. Use them to repair or change threads in soft metals such as aluminum. Inserts may be mildly magnetic. They’re comparable to Keensert® inserts. Installation requires a drill bit, a standard tap, an installation tool, and a hammer.

Choose inserts with a thick wall for greater strength than thin-wall inserts, or to fill a large hole.

For technical drawings and 3-D models, click on a part number.

With a distorted internal thread and keys on the outside, these inserts create a strong hold on both fasteners and surrounding material. Together, the distorted thread and keys create a mechanical lock that resists pull-out from vibration or temperature changes and is stronger than inserts that require threadlocker. Use them to create completely new threads, add strong threads in soft metal, or replace existing threads that are damaged or need to be resized. They're often seen in molds, tools and dies, and suspension systems in vehicles.

Made of a solid piece of metal, these inserts are also stronger than helical inserts, which are made of coiled wire. A dry-film lubricant makes it easy to install them and to screw fasteners into them. All are made to tight tolerances with strictly controlled materials; many inch sizes also meet military or aerospace standards for dimensions and material.

To install, you'll need a tap to create the threads in your material, and an installation tool and a hammer to drive the keys into the material.

When choosing between stainless steel and cadmium-plated steel, consider strength and price. Both materials withstand wet environments. Stainless steel inserts are economical, but not as strong as steel. Use cadmium-plated steel inserts in applications where additional strength is necessary, such as in engine blocks. Steel inserts are stronger than stainless steel inserts, but are more expensive.

Inserts with thick walls are the most commonly used; they’re stronger than thin-wall inserts and are used in larger holes. Inserts with extra-thick walls are the strongest; use them to reduce the size of tapped holes.

For technical drawings and 3-D models, click on a part number.

Drive the keys into the surrounding material for a more secure hold than thread-locking inserts. These inserts are used to repair or convert threads in soft metals such as aluminum. They’re comparable to Keensert® inserts.

18-8 stainless steel inserts are more corrosion resistant than black-phosphate steel. They may be mildly magnetic.

Black-phosphate steel inserts are mildly corrosion resistant.

Choose inserts with a thick wall for greater strength than thin-wall inserts, or to fill a large hole.

These assortments include various sizes of key-locking inserts with thick and thin walls, and an installation tool. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts. Use them to repair or convert threads in soft metals such as aluminum. They’re comparable to Keensert® inserts.

18-8 stainless steel inserts are more corrosion resistant than black-phosphate steel. They may be mildly magnetic.

Black-phosphate steel inserts are mildly corrosion resistant.

Choose assortments with thick-wall inserts for greater strength than thin-wall inserts, or to fill a large hole.

A black-phosphate finish provides mild corrosion resistance. Also known as E-Z Lok, these inserts use Loctite® adhesive to keep them in place. The adhesive reaches full strength after 72 hours. Installation requires a drill bit and a standard tap. Then set the insert with a bolt and two nuts, or use an installation bit.

Choose inserts with a thick wall for greater strength than thin-wall inserts, or to fill a large hole.

To drive slotted inserts, you can use a slotted screwdriver instead of using an installation bit or a bolt and two nuts.

For technical drawings and 3-D models, click on a part number.

These nuts are chemical resistant and may be mildly magnetic. Also known as Allen nuts, use them with socket head cap screws in recessed holes and tight spaces that don't have enough clearance for a wrench. Tighten them with a 6-point hex key. They can also be used as an insert by pressing or drawing them into nonhardened steel, cast iron, or soft nonferrous metal or by molding them into plastic, ceramic, fiber, and similar materials.

For technical drawings and 3-D models, click on a part number.