Thread the male connection into a tapped hole and snap the other end into a panel for a secure hold that can be released for repairs and upgrades.

Weld these nuts to stainless steel surfaces.

Weld these nuts to stainless steel surfaces.

These nuts have three mounting holes to accept screws and rivets for use with thin materials.

About twice as strong as aluminum rivet nuts, these steel rivet nuts are zinc plated for mild corrosion resistance.

These aluminum rivet nuts are one-third the weight of steel rivet nuts and have mild corrosion resistance.

These aluminum rivet nuts are one-third the weight of steel rivet nuts and have mild corrosion resistance.

About twice as strong as aluminum rivet nuts, these low-profile rivet nuts have a cadmium or tin-zinc plating for corrosion resistance.

The most corrosion resistant low-profile rivet nuts we offer, these stand up to chemicals.

A PVC foam seal under the flange keeps liquids and gasses from leaking between the nut and the surrounding material.

Threads float inside the nut so you can install a screw at a slight angle to align with off-center parts. They’re also known as Riv-Float nuts.

Stronger than stainless steel, these nuts are comparable in strength to Grade 9 bolts.

Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.

Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.

A dry film keeps the screw from sticking or binding in these inserts during installation.

Inserts come with a through-hole tap and installation tool.

A black-phosphate finish provides mild corrosion resistance.

Made of 18-8 stainless steel, these inserts have good corrosion resistance.

With a distorted internal thread and keys on the outside, these inserts create a strong hold on both fasteners and surrounding material.

A black-phosphate finish provides mild corrosion resistance.

These inserts are the most corrosion-resistant thread-locking inserts we offer.

The knurled body holds these inserts in place in aluminum and other soft metals. Use an arbor press to install them in untapped holes.

Assortments include various sizes of inserts, a soldering iron, a ceramic insulation tube, and installation tips.

Made from brass, these inserts are electrically conductive, nonmagnetic, and have good corrosion resistance.

These aluminum inserts are 70% lighter than brass inserts, electrically conductive, and nonmagnetic. They have good corrosion resistance, which is comparable to brass but not as good as stainless steel.

These 18-8 stainless steel inserts have better corrosion resistance than brass inserts and may be mildly magnetic.

The flange keeps these inserts from pulling through a hole. Press them in from the underside of material, and install a screw from the top of material.

The barbed sides keep these securely in place even before a screw is installed.

70% lighter than stainless steel, these aluminum inserts are mildly corrosion resistant and nonmagnetic.

Also known as Trisert inserts, these cut threads into plastic and have better holding power than press-fit inserts.

Steel inserts have high strength for durability.

Assortments include various sizes of tapping inserts for hardwood.

Large threads cut into softwood such as particleboard for a strong hold.

The most corrosion resistant tee nut inserts we offer, these inserts stand up to chemicals and salt water.

Ridges on the barrel of these inserts make them less likely to split hardwood than inserts with prongs. They're often used in wood that has been cut across the growth rings.

Knurls hold these inserts in hardwoods such as oak, maple, and walnut to prevent twisting.

A closed end seals out elements and protects the threads on these inserts from debris.

Use these rivet nuts for light duty fastening in low-clearance applications. Assortments include rivet nuts, mandrels, and an installation tool.

Also known as caulk-in anchors, these stay secure when there's not much material to hold.

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist these bumpers into a threaded hole.