A nonconductive rubber coating insulates the nut from electricity, seals out moisture, and damps vibration.

About twice as strong as aluminum rivet nuts, these steel rivet nuts are zinc plated for mild corrosion resistance.

The thread area is enclosed, which prevents leakage past the threads from either side of your application.

A smooth base on these metric nuts provides more contact with the mating surface than weld nuts with projections

Stronger than stainless steel, these nuts are comparable in strength to Grade 9 bolts.

Made of 18-8 stainless steel, these inserts have good corrosion resistance.

The strongest key-locking inserts we offer, these inserts are made to stringent military specifications.

Forming the strongest hold of any of our threaded inserts, these inserts have a distorted internal thread to lock screws into place and keys that drive into surrounding material to prevent slipping and rotating.

Made of 18-8 stainless steel, these inserts have better corrosion resistance than black-phosphate steel.

These inserts are the most corrosion-resistant thread-locking inserts we offer.

Made of nickel alloy, these inserts are more resistant to acids and salt water than stainless steel inserts.

Assortments include various sizes of helical inserts and a tap, a drill bit, and an installation tool for each thread size.

Also known as Trisert inserts, these cut threads into plastic and have better holding power than press-fit inserts.

With the male threaded end on these inserts, mount components directly to plastic parts.

The flange keeps these inserts from being pulled through a hole and provides a load bearing surface.

The most corrosion resistant tee nut inserts we offer, these inserts stand up to chemicals and salt water.

The plating on these brass fittings creates a shiny finish and provides extra protection in corrosive environments. Fittings have the strength to handle high-pressure applications.

Also known as trapezoidal-thread lead screws and nuts.

Internal ball bearings provide smooth low-friction travel in applications that require high speeds, accurate positioning, and repeatable movement. Also known as single-start metric ball screws and nuts, these have a single thread that runs the length of the screw.

With a nylon insert that grips your threaded shaft or spindle without damaging its threads, these locknuts—also called shaft nuts—hold bearings, bushings, gears, and pulleys prone to vibration tightly in place.

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist these bumpers into a threaded hole.

Mount these bumpers on a threaded stud. All are reinforced with a steel core or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines.