Multiple thread channels (also known as thread starts) create faster linear travel than lead screws with a single thread start.

Weld these nuts to stainless steel surfaces.

A nonconductive rubber coating insulates the nut from electricity, seals out moisture, and damps vibration.

The most corrosion resistant twist-resistant rivet nuts we offer, these stand up to chemicals.

These rivet nuts are mildly corrosion resistant.

About twice as strong as aluminum rivet nuts, these low-profile rivet nuts have a cadmium or tin-zinc plating for corrosion resistance.

These low-profile rivet nuts are one-third the weight of steel and have mild corrosion resistance.

Threads float inside the nut so you can install a screw at a slight angle to align with off-center parts. They’re also known as Riv-Float nuts.

Stronger than stainless steel, these nuts are comparable in strength to Grade 9 bolts.

Join two female-threaded parts of various thread types and sizes, while allowing air, liquids, wire, or other thin materials to pass through.

Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.

A dry film keeps the screw from sticking or binding in these inserts during installation.

A distorted thread grips the screw to resist loosening.

Without a prong to break off and retrieve, these inserts are often used where debris could cause damage.

Inserts come with a through-hole tap and installation tool.

Made of 18-8 stainless steel, these inserts have good corrosion resistance.

With a distorted internal thread and keys on the outside, these inserts create a strong hold on both fasteners and surrounding material.

Made of 18-8 stainless steel, these inserts have better corrosion resistance than black-phosphate steel.

A closed-end tap, drill bit, and installation bit are included with these inserts.

Assortments include various sizes of inserts, a soldering iron, a ceramic insulation tube, and installation tips.

Made from brass, these inserts are electrically conductive, nonmagnetic, and have good corrosion resistance.

These aluminum inserts are 70% lighter than brass inserts, electrically conductive, and nonmagnetic. They have good corrosion resistance, which is comparable to brass but not as good as stainless steel.

These 18-8 stainless steel inserts have better corrosion resistance than brass inserts and may be mildly magnetic.

The flange keeps these inserts from pulling through a hole. Press them in from the underside of material, and install a screw from the top of material.

These 18-8 stainless steel inserts have better corrosion resistance than aluminum inserts and may be mildly magnetic.

Also known as Trisert inserts, these cut threads into plastic and have better holding power than press-fit inserts.

These 18-8 stainless steel inserts have excellent resistance to chemicals and may be mildly magnetic.

The most corrosion resistant tee nut inserts we offer, these inserts stand up to chemicals and salt water.

Use these rivet nuts for light duty fastening in low-clearance applications. Assortments include rivet nuts, mandrels, and an installation tool.

These brass fittings have the strength to handle high-pressure applications.

Their small size makes these miniature fittings a good choice for cramped, confined spaces.