PG-11 Bushings | McMaster-Carr

These grips are sized to fit in tight areas. They are rated IP68 and 69K for protection from continuous submersion and high-pressure, high-temperature jets of water. They are also rated NEMA 4X, 6, and 12 for indoor and outdoor protection against corrosion, water projected from a hose, and dripping oils and lubricants. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection. For the strongest hold and most secure seal around a cord, select cord grips with the smallest cord OD range that will work with your cord.

For technical drawings and 3-D models, click on a part number.

PG Threads
For Cord OD	For Knockout Trade Size	Thread Size	Material	Temp. Range, °F	Features	Environmental Rating	Specifications Met		Each
0.08"-0.24"	PG-11	PG-11	Black Nylon Plastic	-20° to 210°	Nylon Plastic Locknut, Rubber O-Ring	IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12	UL Recognized Component, CSA Certified, UL 746C f1, UL 94 V-0, CE Marked	000000000	00000
0.2"-0.39"	PG-11	PG-11	Black Nylon Plastic	-20° to 210°	Nylon Plastic Locknut, Rubber O-Ring	IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12	UL Recognized Component, CSA Certified, UL 746C f1, UL 94 V-0, CE Marked	00000000	0000
0.24"-0.47"	PG-11	PG-11	Black Nylon Plastic	-20° to 210°	Nylon Plastic Locknut, Rubber O-Ring	IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12	UL Recognized Component, CSA Certified, UL 746C f1, UL 94 V-0, CE Marked	000000000	0000

Continuous-Flex Plastic Submersible Cord Grips

These grips have an extension that provides extra support for moving cables and prevents kinking for longer cable life. Grips are rated IP68 and 69K for protection from continuous submersion and high-pressure, high-temperature jets of water. They are also rated NEMA 4X, 6, and 12 for indoor and outdoor protection against corrosion, water projected from a hose, and dripping oils and lubricants. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection.

For technical drawings and 3-D models, click on a part number.

PG Threads
For Cord OD	For Knockout Trade Size	Thread Size	Material	Temp. Range, °F	Features	Environmental Rating	Specifications Met		Each
0.08"-0.24"	PG-11	PG-11	Black Nylon Plastic	-20° to 210°	Nylon Plastic Locknut, Rubber O-Ring	NEMA 4X, NEMA 6, NEMA 12, IP68, IP69K	UL Recognized Component, UL 94 V-0, UL 746C f1, CSA Certified	00000000	00000
0.12"-0.28"	PG-11	PG-11	Black Nylon Plastic	-20° to 210°	Nylon Plastic Locknut, Rubber O-Ring	NEMA 4X, NEMA 6, NEMA 12, IP68, IP69K	UL Recognized Component, UL 94 V-0, UL 746C f1, CSA Certified	00000000	0000
0.2"-0.39"	PG-11	PG-11	Black Nylon Plastic	-20° to 210°	Nylon Plastic Locknut, Rubber O-Ring	NEMA 4X, NEMA 6, NEMA 12, IP68, IP69K	UL Recognized Component, UL 94 V-0, UL 746C f1, CSA Certified	00000000	0000
0.24"-0.47"	PG-11	PG-11	Black Nylon Plastic	-20° to 210°	Nylon Plastic Locknut, Rubber O-Ring	NEMA 4X, NEMA 6, NEMA 12, IP68, IP69K	UL Recognized Component, UL 94 V-0, UL 746C f1, CSA Certified	00000000	0000

90° Elbow Continuous-Flex Plastic Submersible Cord Grips

Cord Grip Shown Open

Cord Grip

For technical drawings and 3-D models, click on a part number.

PG Threads
For Cord OD	For Knockout Trade Size	Thread Size	Material	Temp. Range, °F	Features	Environmental Rating	Specifications Met		Each
0.11"-0.28"	PG-11	PG-11	Black Nylon Plastic	-20° to 210°	Nylon Plastic Locknut, Rubber O-Ring	IP68, IP69K, NEMA 12, NEMA 4X, NEMA 6	CSA Certified, UL 746C f1, UL 94 V-0, UL Recognized Component	0000000	000000
0.2"-0.39"	PG-11	PG-11	Black Nylon Plastic	-20° to 210°	Nylon Plastic Locknut, Rubber O-Ring	IP68, IP69K, NEMA 12, NEMA 4X, NEMA 6	CSA Certified, UL 746C f1, UL 94 V-0, UL Recognized Component	0000000	00000

Plastic Submersible Cord Grips

Able to resist most chemicals and withstand use underwater, these nylon grips are rated IP68 for protection from dusty environments and prolonged submersion. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection. All are CE marked and TUV Rheinland certified, which means they meet European safety standards. Grips with UL certifications meet American safety standards, while those with C-UL and CSA certifications meet Canadian safety standards. Some also meet standards for marine vessels classed by DNV-GL.

For technical drawings and 3-D models, click on a part number.

							Each
For Cord OD	For Knockout Trade Size	Temp. Range, °F	Features	Environmental Rating	Specifications Met		1-9	10-Up
PG Threads
0.08"-0.28"	PG-11	0° to 175°	Nylon Plastic Locknut, Rubber O-Ring	NEMA 12, IP68	UL Recognized Component, C-UL Recognized Component, CSA Certified, CE Marked, TUV Rheinland Certified	0000000	00000	00000

High-Temperature Plastic Submersible Cord Grips

Made of PVDF, these grips are able to withstand temperatures up to 300° F and are corrosion- and chemical-resistant. Grips are rated NEMA 12 for protection from splashing oil and coolant as well as IP68 and NEMA 6 for protection from continuous submersion. They’re also rated IP69K and NEMA 4X, which means in addition to being submersible, they withstand high-pressure, high-temperature washdowns and can be dunked in corrosive liquids without any affect. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection.

For technical drawings and 3-D models, click on a part number.

PG Threads
For Cord OD	For Knockout Trade Size	Temp. Range, °F	Features	Environmental Rating	Specifications Met		Each
0.12"-0.28"	PG-11	-30° to 300°	Nickel-Plated Brass Locknut, Rubber O-Ring	IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12	UL Recognized Component, CSA Certified, UL 94 V-0	0000000	000000
0.2"-0.39"	PG-11	-30° to 300°	Nickel-Plated Brass Locknut, Rubber O-Ring	IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12	UL Recognized Component, CSA Certified, UL 94 V-0	0000000	00000

90° Elbow Plastic Submersible Cord Grips

Able to resist most chemicals and withstand use underwater, these nylon grips are rated IP68 and 69K for protection from continuous submersion and high-pressure, high-temperature jets of water. They are also rated NEMA 4X, 6, and 12 for indoor and outdoor protection against corrosion, water projected from a hose, and dripping oils and lubricants. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection. All meet UL 746C f1, so they’re UV resistant and can be used in direct sunlight, as well as UL 94 V-0, which means they’ll self-extinguish within 10 seconds of catching fire and won’t spread flames by dripping. UL listed and CSA certified, they meet U.S. and Canadian safety standards.

For technical drawings and 3-D models, click on a part number.

PG Threads
For Cord OD	For Knockout Trade Size	Material	Temp. Range, °F	Features	Environmental Rating	Specifications Met		Each
0.11"-0.28"	PG-11	Black Nylon Plastic	-20° to 210°	Nylon Plastic Locknut, Rubber O-Ring	IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12	UL Listed, UL 94 V-0, UL 746C f1, CSA Certified	0000000	000000
0.2"-0.39"	PG-11	Black Nylon Plastic	-20° to 210°	Nylon Plastic Locknut, Rubber O-Ring	IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12	UL Listed, UL 94 V-0, UL 746C f1, CSA Certified	0000000	00000

Flared Plastic Submersible Cord Grips

Secure cords installed through enclosures and panels in wet environments while protecting them against sharp bends. With a flared end that keeps cords from bending without limiting too much motion, these grips extend cord life. They’re good for cords used on handheld equipment. Made of polyamide, they stand up to corrosion and wear.

For technical drawings and 3-D models, click on a part number.

PG Threads
For Cord OD	For Knockout Trade Size	Flare Diameter	Material	Temperature Range, °F	Features	Environmental Rating	Specifications Met		Each
0.15"-0.39"	PG-11	1 1/8"	Gray Polyamide Plastic	0° to 175°	Nylon Plastic Locknut, Rubber O-Ring	NEMA 12, IP68	UL Listed, C-UL Listed, CE Marked	0000000	00000

Vented Plastic Submersible Cord Grips

Vent air from your enclosure to equalize pressure and stop condensation from forming inside while securing cords in wet environments. These polyamide grips are lightweight and resist rusting. Because they’re IP rated, you can safely submerse them for brief periods of time. They also seal out water from washdowns and dust. All relieve strain on your cord if it’s pulled, prolonging its life.

For technical drawings and 3-D models, click on a part number.

PG Threads
For Cord OD	For Knockout Trade Size	Thread Size	Material	Temperature Range, °F	Features	Environmental Rating	Specifications Met		Each
0.16"-0.31"	PG-11	PG-11	Black Polyamide Plastic	0° to 210°	Nylon Plastic Locknut, Rubber O-Ring	IP66, IP67	CSA Certified, CE Marked, CSA-US Certified, C-UL Recognized Component, DNV-GL Type Approved, UL Recognized Component, VDE Certified	00000000	000000

Screw-Down Sure-Grip Plastic Submersible Cord Grips

Tighten the screw-down clamp on these grips for superior pull-out resistance while relieving tension at connection points. Grips are rated IP68 for protection from prolonged submersion and IP69K for protection against high-pressure, high-temperature jets of water. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection.

For technical drawings and 3-D models, click on a part number.

PG Threads
For Cord OD	For Knockout Trade Size	Material	Temp. Range, °F	Features	Environmental Rating	Specifications Met		Each
0.24"-0.39"	PG-11	Black Nylon Plastic	0° to 155°	Rubber O-Ring, Nylon Plastic Locknut	IP68, IP69K, NEMA 4X, NEMA 6	UL 94 V-0, CE Marked, DNV-GL Type Approved	00000000	000000

Brass Submersible Cord Grips

PG and Metric Threads

Suitable for use in applications where cords are underwater—these grips are rated IP68 for protection from prolonged submersion. They are nickel plated for good corrosion resistance. A rubber bushing and O-ring create a tight seal to prevent liquid from entering your connection.

For technical drawings and 3-D models, click on a part number.

PG Threads
For Cord OD	For Knockout Trade Size	Thread Size	Temp. Range, °F	Features	Environmental Rating	Specifications Met		Each
0.16"-0.39"	PG-11	PG-11	0° to 210°	Nickel-Plated Brass Locknut, Rubber O-Ring	IP68	CE Marked	0000000	00000

Vented Brass Submersible Cord Grips

Secure cable installed through enclosures in wet environments while venting air to protect electronics from condensation. Vents on these cord grips equalize pressure between the inside and outside of an enclosure, preventing harmful moisture from forming. They are nickel-plated brass, so they resist corrosion. These cord grips are rated IP66 and IP67 for protection from dust, washdown, and temporary submersion.

For technical drawings and 3-D models, click on a part number.

PG Threads
For Cord OD	For Knockout Trade Size	Thread Size	Temperature Range, °F	Features	Environmental Rating	Specifications Met		Each
0.2"-0.39"	PG-11	PG-11	0° to 210°	Nickel-Plated Brass Locknut, Rubber O-Ring	IP66, IP67	CSA Certified, CE Marked, CSA-US Certified, C-UL Recognized Component, DNV-GL Type Approved, UL Recognized Component, VDE Certified	0000000	000000

Stainless Steel Submersible Cord Grips

These stainless steel grips offer the most corrosion resistance of any of our submersible metal cord grips. Grips are rated IP68 for protection from prolonged submersion and IP69K for protection from high-pressure, high-temperature jets of water. A rubber bushing and O-ring create a tight seal to prevent liquid from entering your connection.

For technical drawings and 3-D models, click on a part number.

PG Threads
For Cord OD	For Knockout Trade Size	Temp. Range, °F	Features	Environmental Rating	Specifications Met		Each
0.2"-0.39"	PG-11	-20° to 210°	Rubber O-Ring, Nickel-Plated Brass Locknut	IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12	CE Marked, CSA Certified, UL Recognized Component	0000000	000000