Roller Track for Doors
Combine track, mounting brackets, hangers, and end stops to create a system for hanging doors.
Powder-coated steel components are durable, so they resist wear and tear over time. Galvanized steel components have better corrosion resistance in wet environments than powder-coated steel components, so they are the better choice for use outdoors.
Door stops (not included) mount on the floor to keep sliding doors and panels from damaging walls and door frames.
For technical drawings and 3-D models, click on a part number.
Wall-mount brackets wrap around the outside of track and mount to the wall to act as supports and joints. They can be mounted on any vertical surface, such as above doorways. Brackets are required every 2 ft. of track.
Support brackets are used to mount the track in the desired location. Those with a center stop provide support and a door stop at the center for bi-parting door installations.
Joint brackets join two pieces of track together to create longer runs. Tabs on the top of the brackets slot into pockets in the adjoining track. Joint brackets also act as support brackets.
Double-track brackets hold two parallel tracks for bypassing doors. Bypassing door systems are often used if there isn’t space on one side of the door to fit a full-size door.
Brackets with a debris cap keep dirt and debris out of the track and roller. They will not prevent the hanger from rolling off the track.
Without Debris Cap | With Debris Cap | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Track Capacity, lbs. | For Inside Track Wd. | Ht. | Color | Mounting Fasteners Included | Mounting Hole Dia. | Each | Each | ||
Support Brackets with Center Stop | |||||||||
Powder-Coated Steel | |||||||||
| 400 | 1 3/4" | 7 15/16" | Beige | No | 7/16" | 00000000 | 0000000 | 000000 | 00 |
| 400 | 1 3/4" | 7 15/16" | Black | No | 7/16" | 00000000 | 000000 | 000000 | 00 |
| 600 | 2 1/4" | 10 3/8" | Beige | No | 9/16" | 00000000 | 000000 | 000000 | 00 |
| 800 | 2 5/8" | 10 1/2" | Beige | No | 9/16" | 00000000 | 000000 | 000000 | 00 |
Galvanized Steel | |||||||||
| 400 | 1 3/4" | 7 15/16" | __ | No | 7/16" | 00000000 | 000000 | 000000 | 00 |
Zinc-Plated Steel | |||||||||
| 600 | 2 1/4" | 10 3/8" | __ | No | 9/16" | 00000000 | 000000 | 000000 | 00 |
Double-Track Support Brackets | |||||||||
Powder-Coated Steel | |||||||||
| 400 | 1 3/4" | 8" | Beige | No | 7/16" | 00000000 | 00000 | 00000000 | 000000 |
| 400 | 1 3/4" | 8" | Black | No | 7/16" | 00000000 | 00000 | 000000 | 00 |
Galvanized Steel | |||||||||
| 400 | 1 3/4" | 8" | __ | No | 7/16" | 00000000 | 00000 | 00000000 | 00000 |
Joint Brackets | |||||||||
Zinc-Plated Steel | |||||||||
| 1,000 | 2 5/8" | 7 5/16" | __ | No | 11/16" | 00000000 | 000000 | 000000 | 00 |
Double-Track Joint Brackets | |||||||||
Powder-Coated Steel | |||||||||
| 400 | 1 3/4" | 8" | Beige | No | 7/16" | 00000000 | 00000 | 000000 | 00 |
Galvanized Steel | |||||||||
| 400 | 1 3/4" | 8" | __ | No | 7/16" | 00000000 | 00000 | 000000 | 00 |
Roller Track Sets for Bypassing Doors
These sets include everything you need to hang two doors that slide past each other. Track can be cut to length with a saw. Hangers adjust vertically between the bottom of the track and the top of the door. Two hangers per door are required.
Roller Track Sets | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Vertical Adjustment | Additional Hangers | |||||||||
| Lg. | For Door Thick. | Ht. | Min. | Max. | Material | Mounting Fasteners Included | Each | Each | ||
60-lb. Capacity | ||||||||||
| 4' | 3/4"-1 3/8" | 1 1/16" | 1 1/4" | 1 9/16" | Steel | Yes | 000000 | 000000 | 000000 | 00 |
| 5' | 3/4"-1 3/8" | 1 1/16" | 1 1/4" | 1 9/16" | Steel | Yes | 000000 | 00000 | 000000 | 00 |
| 6' | 3/4"-1 3/8" | 1 1/16" | 1 1/4" | 1 9/16" | Steel | Yes | 000000 | 00000 | 000000 | 00 |
| 8' | 3/4"-1 3/8" | 3 1/8" | 1 1/8" | 1 3/8" | Steel | Yes | 0000000 | 00000 | 000000 | 00 |
125-lb. Capacity | ||||||||||
| 4' | 1 3/8"-1 3/4" | 1 3/16" | 2 1/16" | 2 11/16" | Aluminum | Yes | 0000000 | 00000 | 00000000 | 00000 |
| 5' | 1 3/8"-1 3/4" | 1 3/16" | 2 1/16" | 2 11/16" | Aluminum | Yes | 0000000 | 00000 | 00000000 | 0000 |
| 6' | 1 3/8"-1 3/4" | 1 3/16" | 2 1/16" | 2 11/16" | Aluminum | Yes | 0000000 | 00000 | 00000000 | 0000 |
| 8' | 1 3/8"-1 3/4" | 1 3/16" | 2 1/16" | 2 11/16" | Aluminum | Yes | 0000000 | 00000 | 00000000 | 0000 |
| Each | Pair | |||||||||
250-lb. Capacity | ||||||||||
| 5' | 1 3/8"-1 3/4" | 1 7/16" | 2 3/16" | 2 11/16" | Aluminum | Yes | 0000000 | 000000 | 0000000 | 00000 |
| 6' | 1 3/8"-1 3/4" | 1 7/16" | 2 3/16" | 2 11/16" | Aluminum | Yes | 0000000 | 000000 | 0000000 | 00000 |
| 8' | 1 3/8"-1 3/4" | 1 7/16" | 2 3/16" | 2 11/16" | Aluminum | Yes | 0000000 | 000000 | 0000000 | 00000 |
Floor-Mount Track for Hanging Doors
Stop hanging doors from swaying. These tracks and guides (both sold separately) give your door a path to run along the floor for smooth, stable motion. Light spring tension keeps the guides nestled in the track, so they won't jump the track. This system is especially great for making heavy doors glide evenly, but you can also use them with bypassing and folding doors. When you use them with folding doors, the guides swivel to allow the doors to open.
Use a saw to cut the track to the length you need. You can mount the track on top of finished floors or set them into a recess to avoid creating an obstruction or tripping hazard. Secure two guides to the bottom of each door directly under the hangers on the top of the door.
For technical drawings and 3-D models, click on a part number.
| Lg. | Wd. | Ht. | Color | Mounting Fasteners Included | Mounting Hole Dia. | No. of Mounting Holes | Pkg. Qty. | Pkg. | |
Powder-Coated Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 10 ft. | 1/2" | 3/8" | Black | No | 0.218" | 22 | 2 | 0000000 | 0000000 |
Track Sets for Bypassing Cabinet Doors
Sets include an upper and lower track for hanging lightweight cabinet doors that slide past each other.
Aluminum track has mounting holes for fasteners. Plastic track mounts with glue or tape with adhesive on both sides.
For technical drawings and 3-D models, click on a part number.
Upper Track | Lower Track | 4 ft. | 6 ft. | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Thick. | Ht. | Wd. | Ht. | Wd. | Color | Mounting Fasteners Included | Mounting Hole Dia. | Each | Each | ||
Aluminum— for Wood Doors | |||||||||||
| 1/4" | 1/2" | 1 1/4" | 1/4" | 1 1/4" | __ | No | 1/8" | 0000000 | 000000 | 0000000 | 000000 |
Plastic— for Glass and Wood Doors | |||||||||||
| 1/4" | 9/16" | 7/8" | 5/16" | 7/8" | Beige | No | __ | 000000 | 00000 | 000000 | 00000 |
Plastic— for Wood Doors | |||||||||||
| 1/8" | 9/16" | 5/8" | 5/16" | 5/8" | Beige | No | __ | 0000000 | 00000 | 0000000 | 00000 |
| 1/4" | 9/16" | 7/8" | 5/16" | 7/8" | White | No | __ | 0000000 | 00000 | 0000000 | 00000 |
| 1/2" | 9/16" | 1 3/8" | 5/16" | 1 3/8" | Beige | No | __ | 0000000 | 00000 | 0000000 | 00000 |
| 3/4" | 3/4" | 1 15/16" | 3/8" | 1 15/16" | Beige | No | __ | 0000000 | 00000 | 0000000 | 00000 |
Roller Track Sets for Bypassing Cabinet Doors
For smoother operation than standard track sets, these sets include upper and lower roller track. Use them to hang lightweight cabinet doors that slide past each other. To mount, use nails or glue track in place. Height of cabinet door should not exceed twice its width.
For technical drawings and 3-D models, click on a part number.
Upper Track | Lower Track | ||||||
|---|---|---|---|---|---|---|---|
| For Door Thick. | Ht. | Wd. | Ht. | Wd. | Mounting Fasteners Included | Each | |
3 ft. | |||||||
Zinc-Plated Steel—for Glass Doors | |||||||
| 1/4" | 5/8" | 15/16" | 1" | 1" | No | 000000 | 000000 |
4 ft. | |||||||
Zinc-Plated Steel—for Glass Doors | |||||||
| 1/4" | 5/8" | 15/16" | 1" | 1" | No | 000000 | 000000 |
5 ft. | |||||||
Zinc-Plated Steel—for Glass Doors | |||||||
| 1/4" | 5/8" | 15/16" | 1" | 1" | No | 000000 | 000000 |
6 ft. | |||||||
Zinc-Plated Steel—for Glass Doors | |||||||
| 1/4" | 5/8" | 15/16" | 1" | 1" | No | 000000 | 000000 |